• The KIPS Transactions:PartA
• /
• v.13A no.3 s.100
• /
• pp.223-230
• /
• 2006

A MMORPG(Massively Multiplayer Online Role-Playing Game) is an online role-playing game in which a large number of players can interact with each other in the same world at the same time. Most of them require significant hardware requirements(e.g., servers and bandwidth), and dedicated support staff. Despite the efforts of developers, users often cite overpopulation, lag, and poor support as problems of games. In this paper, a dynamic load balancing method for MMORPGS is proposed. It tries to adapt to dynamic change of population by using dynamic map-partition method with VML(Virtual Map Layer) which consists of fields, sector groups, sectors, and cells. From the experimental results, our approach achieves about $23^{\sim}67%$ lower loads for each field server. By the modification to Virtual Area Layer, we can easily manage problems that come from changes of map data, resources' status, and users' behavior pattern.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1900-1906
• /
• 1997

In this paper, the efficient BILBO(named EBILBO) is designed for BIST that is able to batch the testing when circuit is designed on FPGA. The proposed algorithm of batch testing is able to test the normal operation speed with one-pin-count that can control all part of large and complex circuit. PRTPG is used for the test pattern and MISR is used for PSA. The proposed algorithm of batch testing is VHDL coding on behavioral description, so it is easily modified the model of test pattern generation, signature analysis and compression. The EBILBO's area and the performance of designed BIST are evaluated with ISCAS89 benchmark circuit on FPGA. In circuit with above 600 cells, it is shown that area is reduced below 30%, test pattern is flexibly generated about 500K and the fault coverage is from 88.3% to 100%. EBILBO for the proposed batch testing BIST is able to execute concurrently normal and test mode operation in real time to the number of $s+n+(2^s/2^p-1)$ clock(where, in CUT, # of PI;n, # of register, p is order # of polynomial). The proposed algorithm coded with VHDL is made of library, then it well be widely applied to DFT that satisfy the design and test field on sme time.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.69-79
• /
• 2012

The aim of this study is to analyze the mid-term changes of beach and dune morphology at Sohwang beach, Korea using by Total Station. Measurements executed 4 times during two year. Based on ArcInfo as point cloud obtained through precise measurement data by Total Station, alteration of beach and dune was analyzed at DEM, of which cell size is about 1m. Since these artificial constructions have influenced current systems of this region, the large-scale sand movements above mentioned have occurred around the jetty and the sea-wall. There occurred sedimentation in the north of the Jetty and erosion in the south of the Jetty, which is installed at the central part of object area. The direction of recent topographic development does not coincide with that of wind, and, rather, topographic changes occurred mainly at beaches and dunes due to the transformation of coastal water flow caused by artificial structure nearby. If precise measurement is conducted periodically, and long term monitoring is carried out by installing equipment measuring movement pattern of sediment around artificial structure, cause of topographic change around the object area could be discovered.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.4
• /
• pp.332-340
• /
• 2023

Crystalline silicon solar cells have attracted great attention for their various advantages, such as the availability of raw materials, high-efficiency potential, and well-established processing sequence. Tunnel oxide passivated contact (TOPCon) solar cells are widely regarded as one of the most prospective candidates for the next generation of high-performance solar cells because an efficiency of 26% has been achieved in small-area solar cells. Compared to n-type TOPCon solar cells, the photo conversion efficiency (PCE) of p-type TOPCon is slightly higher. The highest PCEs of p-type TOPCon and n-type TOPCon solar cells are 26.0% and 25.8%, respectively. Despite the highest efficiency in small-area cells, limited progress has been achieved in p-type TOPCon solar cells for large are due to their lower carrier lifetime and inferior surface passivation with the boron-doped c-Si wafer. Nevertheless, it is of great importance to promoting the p-type TOPCon technology due to its lower price and well-established manufacturing procedures with slight modifications in the PERC solar cells production lines. The progress in different approaches to increase the efficiencies of p-type TOPCon solar cells has been reported in this review article and is expected to set valuable strategies to promote the passivation technology of p-type TOPCon, which could further increase the efficiency of TOPCon solar cells.

• Korean Journal of Environmental Biology
• /
• v.37 no.2
• /
• pp.119-128
• /
• 2019

The morphological characteristics of the bloom-forming dinoflagellate Akashiwo sanguinea isolated from Jangmok Harbour, Geoje in Korea was examined using light and scanning electron microscope (SEM), and its large subunit (LSU) rDNA was sequenced. Additionally, investigation was done on the effects of temperature and salinity on the growth of A. sanguinea. The cells were dorso-ventrally compressed up to 54.7-70.3 ㎛ long and 31.5-48.5 ㎛ wide. The epicone was conical while the hypocone was separated into two lobes. The nucleus was positioned at the center of the cell. The yellow-brown chloroplasts radiated close to the cell center. SEM observation indicated that A. sanguinea has an e-shaped apical groove. Molecular phylogeny based on LSU rDNA gene sequences revealed that the A. sanguinea strains isolated from Jangmok Harbor were classified in the clade of ribotype A. The maximum growth rate (0.50 day^-1) was observed at 20℃ and 20 psu, while the maximum cell density (1,372 cells mL^-1) was observed at 25℃ and 30 psu. This indicates that the blooms of A. sanguinea ribotype A in Korean coastal area are affected by water temperature, rather than the salinity.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.136-150
• /
• 2010

Due to the effect of indoor coverage problem, the QoS of the indoor users will be degraded dramatically, with the number of indoor users. The femto cell is a popular solution for such problems. Since the price of the femto base station is usually cheap enough, one can sets up huge number of base stations in a small indoor area to reduce the size of communication cell. In this way, the QoS of the indoor users can be improved significantly. Moreover, the data rate can also be increased. However, how to decide an ideal transmitting power according to the surrounding radio environment is not a trivial problem, that still has not been addressed well. If the transmit power of femto base station is too large, the interference to the macro users will be increased. Conversely, if the transmit power of femto base station is too small; the coverage of femto base station will be reduced. To address this problem, we propose a power configuration method in femto base station using Genetic Algorithm by investigating a new fitness function. Furthermore, we adopt the weighted sum approach to improve the user performance in different modes. The simulation results show that the proposed power configuration method can not only improves the downlink SINR, but also enhance the channel capacity for both the Macro cell systems and Femto cell systems compared with some conventional methods.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.753-757
• /
• 2014

Anode electrode in a microbial fuel cell (MFC) should transfer the receiving electron as well as provide large surface area that can be immobilized microorganisms. Microorganisms' population is one of important factors to improve the current generation and to treat the livestock wastewater by biological treatment. These studies were attempted to investigate if stainless-steel wire skein (SSWS) could be used as anode electrode replacement a graphite felt electrode in microbial fuel cell. For these studies, pretreated livestock wastewater was used diluted to 500 mg/L as COD before use. At this time, the current showed a little difference of about 5% when using each of a SSW and graphite felt (control). There was no significant difference in the current value. The organic removal rate in the microbial fuel cells used graphite felt and SSWS was 82.4% and 88.3%, respectively. The COD removal in the MFC used the SSWS was higher than that of graphite felt. Ammonium nitrogen was showed similar trend in two case all. These results about current generation and organic matter reduction seem possible that SSWS was used to anode electrode. When SSWS is used, the initial investment for system construction is expected to be able to reduce by approximately 1/50.

• Applied Microscopy
• /
• v.32 no.3
• /
• pp.247-255
• /
• 2002

In this study, we carried out immunostaining and immunogold labeling with antibodies to serotonin and somatostatin to examine the characteristics and functions of the neurons that secrete neurotransmitters in optic lobes of Todarodes pacificus and Octopus minor. As a result of immunostaining with anti-somatostatin, the nerve cells of Todarodes pacificus reacted as similar to the anti-serotonin, but in Octopus minor, only large cells in the outer granule cell layer reacted positively. In the immunogold labeling with anti-serotonin, the nerve cells in the inner grande cell layer and medulla of Todarodes pacificus reacted strongly, 30 gold particles being labeled per $0.5{\mu}m^2$ of the cytoplasm. However, in Octopus minor, only 17 gold particles were labeled, which stated a weak reaction. On the other hand, in the anti-somatostatin case, the nerve cells in the outer and inner granule cell layers and medulla of Todarodes pacificus showed strong reaction, 30 gold particles being labeled per $0.5{\mu}m^2$ of the cytoplasm while the nerve cells in the outer granule cell layer of Octopus minor reacted weakly, about 3 gold particles being labeled per the equivalent area. As a result of immunostaining and immunogold labeling with two types of antibodies to each part of the optic lobes, we found that the reactive nerve cells were distributed differently in the two species. In particular, the degree of reactivity to the immunostaining and immunogold labeling appeared stronger in Todarodes pacificus than in Octopus minor.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.80-85
• /
• 2019

Vanadium dioxide is a well-known metal-insulator phase transition material. Lots of researches of vanadium redox flow batteries have been researched as large scale energy storage system. In this study, vanadium oxide($VO_x$) thin films were applied to cathode for lithium ion battery. The $VO_x$ thin films were deposited on Si substrate($SiO_2$ layer of 300 nm thickness was formed on Si wafer via thermal oxidation process), quartz substrate by RF magnetron sputter system for 60 minutes at $500^{\circ}C$ with different RF powers. The surface morphology of as-deposited $VO_x$ thin films was characterized by field-emission scanning electron microscopy. The crystallographic property was confirmed by Raman spectroscopy. The optical properties were characterized by UV-visible spectrophotometer. The coin cell lithium-ion battery of CR2032 was fabricated with cathode material of $VO_x$ thin films on Cu foil. Electrochemical property of the coin cell was investigated by electrochemical analyzer. As the results, as increased of RF power, grain size of as-deposited $VO_x$ thin films was increased. As-deposited thin films exhibit $VO_2$ phase with RF power of 200 W above. The transmittance of as-deposited $VO_x$ films exhibits different values for different crystalline phase. The cyclic performance of $VO_x$ films exhibits higher values for large surface area and mixed crystalline phase.