• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.318-324
• /
• 2011

In this paper, three coordinated random beamforming (CRBF) schemes are analyzed in a two-cell symmetric interference channel. A simple partial coordination of RBF with base station selection (BSS) is shown to achieve the same average sum rate performance of CRBF with joint encoding (JE). To improve the sum rate performance further, we also propose a transmission mode selection (TMS) between the BSS and JE which is shown to have additional sum rate gain for the large number of users. Simulation results verify the eectiveness of the proposed CRBF schemes and accuracy of the proposed analysis.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.3-8
• /
• 2014

We consider a limited feedback based hybrid beamforming which reduces the energy of feedback information. In the millimeter wave channel, some rays with large ray gain dominate energy of the channel. Using this point, we propose a channel feedback scheme that employs limited number of channel rays. Also, we provide a hybrid beamforming scheme for the limited feedback system. Based on the simulation results, the proposed scheme shows a comparable data rate performance with conventional schemes, while it remarkably reduces energy of channel feedback.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.104-110
• /
• 2008

In this paper, a novel 2-level-search sphere decoding algorithm for multiple-input multiple-output (MIMO) detection and its VLSI implementation are presented. The proposed algorithm extends the search space by concurrently performing symbol detection on 2 level of the tree search. Therefore, the possibility of discarding good candidates can be avoided. Simulation results demonstrate the good performance of the proposed algorithm in terms of bit-error-rate (BER). From the proposed algorithm, an efficient very large scale integration (VLSI) architecture which incorporates low-complexity and fixed throughput features is proposed. The proposed architecture supports many modulation techniques such as BPSK, QPSK, 16-QAM and 64-QAM. The sorting block, which occupies a large portion of hardware utilization, is shared for different operating modes to reduce the area. The proposed hardware implementation results show the improvement in terms of area and BER performance compared with existing architectures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1367-1373
• /
• 2022

In this paper, we consider a power re-allocation technique in order to enhance the frequency efficiency of the low performance user in a cell-free multiple input multiple output (MIMO) network. The AP first allocates transmit power to the user to be proportional to the large-scale fading coefficients of the connected users. Then, the AP reduces the power of the users who were allocated power greater than the threshold ratio of total allocated power to be equal to the threshold ratio of the allocated power. Finally, the AP re-allocates the reduced power from the strong channel user to the user who has the worst channel condition, and thus, the frequency efficiency of the low performance user can be enhanced. In the simulation results, we verify the performance of the power re-allocation technique in terms of the spectral efficiency of the low performance user.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.71-78
• /
• 2005

A K-Best algerian is known as optimal for implementing the maximum-likelihood detector (MLD), since it has a fixed maximum complexity compared with the sphere decoding or the maximum-likelihood decoding algorithm. However the computational complexity of the K-Best algrithm is still prohibitively high for practical applications when K is large enough. If small value of K is used, the maximum complexity decreases but error flooring at high SNR is caused by error propagation. In this paper, a K-reduction scheme, which reduces K according to each search level, is proposed to solve error propagation problems. Simulations showed that the proposed scheme provides the improved performance in the bit error rate and also reduces the average complexity compared with the conventional scheme.

• Journal of Information Processing Systems
• /
• v.11 no.1
• /
• pp.57-75
• /
• 2015

In evaluating the performance of a dual-hop wireless link, the effects of large and small scale fading has to be considered. To overcome this fading effect, several schemes, such as multiple-input multiple-output (MIMO) with orthogonal space time block codes (OSTBC), different combining schemes at the relay and receiving end, and orthogonal frequency division multiplexing (OFDM) are used in both the transmitting and the relay links. In this paper, we first make compare the performance of a two-hop wireless link under a different combination of space diversity in the first and second hop of the amplify-and-forward (AF) case. Our second task in this paper is to incorporate the weak signal of a direct link and then by applying the channel model of two random variables (one for a direct link and another for a relayed link) we get very impressive result at a low signal-to-noise ratio (SNR) that is comparable with other models at a higher SNR. Our third task is to bring other three schemes under a two-hop wireless link: use of transmit antenna selection (TAS) on both link with weak direct link, distributed Alamouti scheme in two-hop link and single relay antenna with OFDM subcarrier. Finally, all of the schemes mentioned above are compared to select the best possible model. The main finding of the paper is as follows: the use of MIMO on both hops but application TAS on both links with weak direct link and the full rate OFDM with the sub-carrier for an individual link provide a better result as compared to other models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2100-2112
• /
• 2011

An orthogonal code hopping multiplexing (OCHM) technique has been proposed for accommodating a large number of users with low channel activities than the number of orthogonal codewords through statistical multiplexing in downlink cellular systems. In this paper, a multiple input multiple output (MIMO) antenna based OCHM system is proposed to improve the performance. Each modulated symbol is repeated N times and the N repeated symbols are transmitted simultaneously using N transmit antennas. Through repetitions, the effect of perforations that the OCHM system experiences is decentralized among the repeated symbols and the full perforation probability is significantly reduced. Each receiver detect the transmitted signal using its pre-assigned code hopping pattern. Simulation results show that the proposed scheme saves the required energy for a given frame error rate (FER).

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.420-424
• /
• 2021

The massive MIMO system, which is a core technology of 5G communication systems, has a problem that it is difficult to implement in a frequency division duplex system based on limited channel feedback because a large amount of channel information is required at the transmitting end. In order to solve this problem, the Joint Spatial Division and Multiplexing (JSDM) technique that dramatically reduces the channel information requirement by removing interference between the user groups using channel correlation information that does not change for a long time has been proposed. Recently, a regularized JSDM technique has been proposed to further improve performance by allowing residual interference between the user groups. However, such JSDM-related studies were mainly designed to focus on inter-group interference cancellation, and thus performance analysis was not performed in a more realistic environment assuming limited feedback in the intra-group interference cancellation phase. In this paper, we analyze the performance of the JSDM and regularized JSDM techniques according to the number of groups and users in a limited feedback environment, and through the simulation results, demonstrate that the regularized JSDM technique shows a more remarkable advantage compared to the existing JSDM in a limited feedback environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6838-6844
• /
• 2014

3GPP LTE-Advanced systems adopt multiple antennas for high speed data transmission. In general, the receiver complexity of a spatially mutiplexed (SM) multiple-input multiple-output (MIMO) system grows in proportion to the number of candidate vectors. A large number of candidate vectors increases the reliability of the soft output values. The maximum likelihood (ML) signal detection with a large number of candidate vectors achieves high performance. On the other hand, low complexity receiver techniques with a small number of candidate vectors provide soft output values, such as low reliability. This paper addresses the improving reliability of the soft output obtained from a small number of candidate vectors. The improved performance of the proposed technique with the aid of computer simulations is reported.

• ETRI Journal
• /
• v.39 no.4
• /
• pp.514-524
• /
• 2017

In this paper, we propose a spatial modulation (SM) scheme referred to as complex quadrature SM (CQSM). In contrast to quadrature SM (QSM), CQSM transmits two complex signal constellation symbols on the real and quadrature spatial dimensions at each channel use, increasing the spectral efficiency. To achieve that, signal symbols transmitted at any given time instant are drawn from two different modulation sets. The first modulation set is any of the conventional QAM/PSK alphabets, while the second is a rotated version of it. The optimal rotation angle is obtained through simulations for several modulation schemes and analytically proven for the case of QPSK, where both results coincide. Simulation results showed that CQSM outperformed QSM and generalized SM by approximately 5 dB and 4.5 dB, respectively, for the same transmission rate. Its performance was similar to that of QSM; however, it achieved higher transmission rates. It was additionally shown numerically and analytically that CQSM outperformed QSM for a relatively large number of transmit antennas.