• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.287-290
• /
• 2003

Sol-gel processing of $BaTiO_3$ ceramics doped with La(0.01~1.00 at.%) were prepared from metal barium, titanium n-butoxide and lanthanum iso-propoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results showed that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of $BaTiO_3$ powders and sintering conditions used.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.22-28
• /
• 2023

The global demand for raw lithium materials is rapidly increasing, accompanied by the demand for lithiumion batteries for next-generation mobility. The batch-type method, which selectively separates and concentrates lithium from seawater rich in reserves, could be an alternative to mining, which is limited owing to low extraction rates. Therefore, research on selectively separating and concentrating lithium using an electrodialysis technique, which is reported to have a recovery rate 100 times faster than the conventional methods, is actively being conducted. In this study, a lithium ion selective membrane is prepared using lithium lanthanum titanate, an oxide-based solid electrolyte material, to extract lithium from seawater, and a large-area membrane manufacturing process is conducted to extract a large amount of lithium per unit time. Through the developed manufacturing process, a large-area membrane with a diameter of approximately 20 mm and relative density of 96% or more is manufactured. The lithium extraction behavior from seawater is predicted by measuring the ionic conductivity of the membrane through electrochemical analysis.

• 한국전기화학회:학술대회논문집
• /
• 2003.10a
• /
• pp.46-46
• /
• 2003

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.65-69
• /
• 1989

Barium titanyl oxalate was synthesized by adding ethanol solution of oxalic acid to the mixed aqueous solution which contained barium or lanthanum radiotracers in addition to Ba(NO$_3)_2$ and TiO(NO$_3)_2$. The oxalate was finally converted to BaTiO$_3$ by calcination at 1000$^{\circ}$C in air. The chemical formula of the oxalate was confirmed to be BaTiO(CTEX>$_2O_4)_2{\cdot}4H_2O$ by the thermal analysis of the barium titanyl oxalate. When the mixture's molar ratio(Ba/Ti) was within a range of 0.950-1.05, the formation of stoichiometric Barium titanate was confirmed with the help of barium tracers. The homogeneity of lanthanum deposite in the final product was also confirmed through the behavior of lanthanum tracers. The results as well as those obtained by XRD and SEM have been explained on the basis of the fact that the reaction occurs on the molecular level in solution and the barium titanate is formed in crystals of single phase.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.321-328
• /
• 1988

The sintering phenomena, electrical resistivity, dielectric and piezoelectric properties of lead titanate ceramics modified by the partial substitution of La for Pb and Mn for Ti, (Pb1-1.5xLax)(Ti1-yMny)O3 ceramics, have been investigated. In (Pb1-1.5xLax)(Ti1-yMny)O3 system, with increasing lanthanum content, the realtive bulk density increased, but the Curie point and tetragonality (c/a) decreased. The tetragonal-to-cubic phase transition boundary existed in the range of 0.20

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.1
• /
• pp.17-21
• /
• 2000

In order to investigate the dependence of a content in lead lanthanum titanate (PLT) films and heat treatment, sol-gel process has been used. Four types of PLT thin films with the chemical formula, Pb$\_$1-x/ La$\_$x/Ti$\_$1-x/4/O$_3$(X=18, 21, 24 and 28 mole %) have been fabricated on Pt/Ti/SiO$_2$/Si multi-layers and ITO/glass substrates, The post-annealing temperature in the range of 400~700 $\^{C}$ is applied for the formation of perovskite structure in PLT films. The structureal, electrical and optical properties of PLT film with the addition of La content are estimated. The films orientation and surface structure of films are studied by XRD (X-ray diffraction) and SEM(scanning electron microscopy). The P-E hysteresis loop become narrower with increasing La content. The average transmittance of the films is about 80%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.287-287
• /
• 2007

The ferroelectric and electric properties of UV-irradiated bismuth lanthanum titanate (BLT) films prepared using photosensitive starting precursors were characterized. The effects of lanthanum doping on ferroelectric and electric properties were investigated by polarization-electric field hysteresis loops and leakage current-voltage measurements. X-ray diffractometer and ellipsometry were served to provide the information about the crystalline structure and thickness of the films after annealing. The images of the surface microstructure and direct-patterned BLT films were observed by using scanning electron microscopy. The effects of lanthanum doping on the electric properties of direct-pattern able BLT films and their direct-patterning were studied.

• Journal of Powder Materials
• /
• v.30 no.4
• /
• pp.324-331
• /
• 2023

Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.

• Journal of Powder Materials
• /
• v.17 no.2
• /
• pp.101-106
• /
• 2010

In this study, we successfully synthesized a nano-sized lanthanum-modified lead-titanate (PLT) powder with a perovskite structure using a high-energy mechanochemical process (MCP). In addition, the sintering behavior of synthesized PLT nanopowder was investigated and the sintering temperature that can make the full dense PLT specimen decreased to below $1050^{\circ}C$ by using $Bi_2O_3$ powder as sintering agent. The pure PLT phase of perovskite structure was formed after MCP was conducted for 4 h and the average size of the particles was approximately 20 nm. After sintered at 1050 and $1150^{\circ}C$, the relative density of PLT was about 93.84 and 95.78%, respectively. The density of PLT increased with adding $Bi_2O_3$ and the specimen with the relative densitiy over 96% were fabricated below $1050^{\circ}C$ when 2 wt% of $Bi_2O_3$ was added.

• Korean Journal of Materials Research
• /
• v.7 no.6
• /
• pp.522-528
• /
• 1997

RF-magnetron Sputtering Process를 이용하여 Pt/Ti/Si(100)기판위에 lanthanum-modified lead titanate 박막을 제작하였다. 기판온도와 증착시간이 증가함에 따라 증착율은 감소하였다. 기판온도가 증가함에 따라 fine grain들은 large grain으로 변화하였다. Perovskite구조는 기판온도 54$0^{\circ}C$, gas pressure 30mtorr에서 나타나기 시작하였다. 본 실험에서 perovskite 박막제작에 대한 조건은 기판온도 58$0^{\circ}C$, gas pressure 30mtorr였다. Pt/Ti/Si(100) 우선 배향된 박막을 얻었다. La양이 증가함에 따라 유전율, 항전계, 잔류분극량은 증가하였다. 중심주파수가 44.7MHz, 전파속도는 2680m/sec를 가지는 SAW filter 특성을 얻었다.