• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.34-43
• /
• 2005

We will catch the spatio-temporal changes that analyse the unknown topography of Go-Gunsan Islands using Landsat TM satellite images into an unsupervised ISODATA classification and a supervised nearest likelihood classification. Each sedimental topography has the different characteristics according to building the Saemangeum embarkment. We will deal with the distribution of sedimental shapes using ERDAS Imagine 8. 6. The result that classifies specifically topographic properties of our research area be considered to get use of establishing the reclaiming program and predicating the reclaimed sedimental topography. The research area can be classified into tidal flats and sea level using band 4 among 7 bands of Landsat TM. Also band 5 can be used to classify the special unknown shapes of tidal flats. We will clarify the efficiency that spatio-temporal sedimental changes can be extracted through processing satellite images. Therefore, the spatio-temporal unknown topography change monitoring using satellite images is expected to be very useful to clarify whether the tidal flat is generated or not in the Go-Gunsan Islands at the outer side of the embarkment after constructing completely the Saemangeum tidal embarkment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.1
• /
• pp.13-22
• /
• 2005

This paper classifies the topography of the Saemangeum Tidal flats based on Landsat TM satellite images by unsupervised ISODATA method, and analysis of the spatiotemporal changes of the classified shapes. The sedimental topography represents various properties according to the Saemangeum Tidal Embankment progress. We well proceed this study of the sedimental changes and distributions. By specifying the topographic characteristics of inner sea areas respectively, the investigation on the case study area according to the changes of the tidal will be useful in the establishment of land reclamation plan and the land use of the reclaimed area. In addition, the estuary image can be divided into tidal flats and sea surfaces using the band 4, also the detailed topography using the band 5, respectively among Landsat TM 7 bands. This paper contributes to the efficient image processing of the spatiotemporal sedimental changes.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.119-129
• /
• 2010

The joint use of remotely sensed data and field measurements has been widely used to estimate aboveground carbon stock in many countries. Recently, Korea Forest Research Institute has developed new carbon emission factors for kind of tree, thus more accurate estimate is possible. In this study, the aboveground carbon stock of Danyang area in South Korea was estimated using k-Nearest Neighbor(kNN) algorithm with the 5th National Forest Inventory(NFI) data. Considering the spectral response of forested area under the climate condition in Korea peninsular which has 4 distinct seasons, Landsat TM seasonal satellite images were collected. As a result, the estimated total carbon stock of Danyang area was ranged from 3542768.49tonC to 3329037.51tonC but seasonal trends were not found.

• Journal of Environmental Impact Assessment
• /
• v.11 no.4
• /
• pp.231-238
• /
• 2002

In this study we classified sediment types of tidal flat using Landsat-5 images. This is for groping the method which can analyze correctly various kinds of sediment faces through satellite images. This work was performed by referencing ground truth of sediment faces which was investigated in the field. With this data we classified Landsat-5 image of 1997's to grope a most suitable classification method. As a result, in case of south Kanghwa island area, it was the optimum way to compound band 4, 5, 7 of Landsat-5 TM imagery. And, this work classified 3 kinds of sediment faces - M(mud), sM(sandy mud) and (g)M(slightly gravelly mud) - in land and mixed water area. It is anticipated that if this method is applied to a image of extremely lower sea level time, it can classify the sediment types of a broad tidal flat area. This is expected to be a beginning of estimating the effect of sediment faces to the change of the tidal flat ecosystem.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.5-15
• /
• 2001

For estimating paddy field area with Landsat TM images, two dates, May 31, 1991 (transplanting stage) and August 19, 1991 (heading stage) were selected by the data analysis of digital numbers considering rice cropping calendar. Four different estimating methods (1) rule-based classification method, (2) supervised classification(maximum likelihood), (3) unsupervised classification (ISODATA, No. of class:15), (4) unsupervised classification (ISODATA, No. of class:20) were examined. Paddy field area was estimated to 7291.19 ha by non-classification method. In comparison with topographical map (1:25,000), accuracy far paddy field area was 92%. A new image stacked by 10 layers, Landsat TM band 3,4,5, RVI, and wetness in May 31,1991 and August 19,1991 was made to estimate paddy field area by both supervised and unsupervised classification method. Paddy field was classified to 9100.98 ha by supervised classification. Error matrix showed 97.2% overall accuracy far training samples. Accuracy compared with topographical map was 95%. Unsupervised classifications by ISODATA using principal axis. Paddy field area by two different classification number of criteria were 6663.60 ha and 5704.56 ha and accuracy compared with topographical map was 87% and 82%. Irrespective of the estimating methods, paddy fields were discriminated very well by using two-date Landsat TM images in May 31,1991 (transplanting stage) and August 19,1991 (heading stage). Among estimation methods, rule-based classification method was the easiest to analyze and fast to process.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.143-150
• /
• 2013

Recently, environmental issues such as climate warming, ozone layer depletion, reduction of tropical forests and desertification are emerging as global environmental problems beyond national problems. And international attention and effort have been carried out in many ways to solve these problems. In this study, the growth of green was calculated quantitatively using the technique of remote sensing and temperature change was figured out through temperature extraction in the city. The land-cover changes and thermal changes for research areas were analyzed using Landsat TM images on May 2002 and May 2009. Surface temperature distribution was calculated using spectral degree of brightness of Band 6 that was Landsat TM thermal infrared sensor to extract the ground surface temperature in the city. As a result of research, the area of urban green belt was increased by $2.87km^2$ and the ground surface temperature decreased by $0.6^{\circ}C{\sim}0.8^{\circ}C$ before and after tree planting projects. Henceforth, if the additional study about temperature of downtown is performed based on remote sensing and measurement data, it will contribute to solve the problems about the urban environment.

• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.263-273
• /
• 1989

Accurate and cost-effective classification of forest vegetation is the primary goal for forest management and utilization of forest resources. Aerial photograph and remote sensing are the most frequent and effective method in forest resources inventories. TM and MSS are the principal observing instruments on the Landsat-4 and -5 earth observing satellite. Especially TM has considerably greater spatial, spectral, and radiometric resolution power than MSS, that is, the IFOV of TM at a nadir is 30m compared to 80m for MSS. In this study, we used TM data to classify forest types and compared the result with forest type map manufactured by interpretation of B/W infrared photographs. As a result, land use types were well defined with TM data. But classifying forest types was a little difficult and indistinct. However, the spectral signatures of forest in every season and growing stages remained as problems to be solved, and also the most effective selection and combination method of bands for differentiating the spectral plots among classes.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.864-867
• /
• 2006

Thermal infrared images of Landsat-5 TM and Landsat-7 ETM+ sensors have been unrivalled sources of high resolution thermal remote sensing (60m for ETM+, 120m for TM) for more than two decades. Atmospheric effect that degrades the accuracy of Sea Surface Temperature (SST) measurement significantly, however, can not be corrected as the sensors have only one thermal channel. Recently, MODIS sensor onboard Terra satellite is equipped with dual-thermal channels (31 and 32) of which the difference of at-satellite brightness temperature can provide atmospheric correction with 1km resolution. In this study we corrected the atmospheric effect of Landsat SST by using MODIS data obtained almost simultaneously. As a case study, we produced the Landsat SST near the eastern and western coast of Korea. Then we have obtained Terra/MODIS image of the same area taken approximately 30 minutes later. Atmospheric correction term was calculated by the difference between the MODIS SST (Level 2) and the SST calculated from a single channel (31 of Level 1B). This term with 1km resolution was used for Landsat SST atmospheric correction. Comparison of in situ SST measurements and the corrected Landsat SSTs has shown a significant improvement in $R^2$ from 0.6229 to 0.7779. It is shown that the combination of the high resolution Landsat SST and the Terra/MODIS atmospheric correction can be a routine data production scheme for the thermal remote sensing of ocean.

• Journal of Korea Water Resources Association
• /
• v.33 no.4
• /
• pp.471-482
• /
• 2000

Surface energy balance components were evaluated by Landsat TM data and GIS with meteorological data. Calibration and validation for the applicability of this methodology were made through the estimating of the large-scale evapotranspiration (ET). In addition, sensitivity and error analysis was conducted to see the effects of the surface energy balance components on ET and the accuracy of each components. Bochong-chon located on the upper part of Guem River basin was selected as the case study area. Spatial distribution map of ET were produced for five dates: Jan. 1, Apr. 3, May. 10, and Nov. 27, 1995. The study results showed tat ET was greatly varied with the aspect and theland use type on the surface. In the case of having northeast and southeast in the aspect, ET was linearly increased depending on growing net radiation. While surface temperature has a high value, NDVI(Normalized Difference Vegetation Index) has a low value in the vegetated area. Therefore, ground heat flux was increased but ET was relatively decreased. The results of sensitivity and error analysis showed that net radiation is most sensitive and effective, ranging from 12.5% to 23.6% of sensitivity. Furthermore, the surface temperature, air temperature, and wind speed have the significant effects on ET estimation using remotely sensed data.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.443-459
• /
• 2013

Located on Java subduction zone, Merapi volcano is an active stratovolcano with a volcanic activity cycle of 1-5 years. Merapi's eruptions were relatively small with VEI 1-3. However, the most recent eruption occurred in 2010 was quite violent with VEI 4 and 386 people were killed. In this study, we have attempted to study the characteristics of Merapi's eruptions during 18 years using optical Landsat images. We have collected a total of 55 Landsat images acquired from July 6, 1994 to September 1, 2012 to identify pyroclastic flows and their temporal changes from false color images. To extract areal extents of pyroclastic flows, we have performed supervised classification after atmospheric correction by using COST model. As a result, the extracted dimensions of pyroclastic flows are nearly identical to the CVP monthly reports. We have converted the thermal band of Landsat TM and ETM+ to the surface temperature using NASA empirical formula and calculated time-series of the mean surface temperature in the area of peak temperature surrounding the crater. The mean surface temperature around the crater repeatedly showed the tendency to rapidly rise before eruptions and cool down after eruptions. Although Landsat satellite images had some limitations due to weather conditions, these images were useful tool to observe the precursor changes in surface temperature before eruptions and map the pyroclastic flow deposits after eruptions at Merapi volcano.