• 제목/요약/키워드: lamb

검색결과 380건 처리시간 0.026초

Lactation and Function of Curve Parameters in Yankasa Sheep

  • Afolayan, R.A.;Abubakar, B.Y.;Osinowo, O.A.;Dim, N.I.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제15권6호
    • /
    • pp.890-894
    • /
    • 2002
  • The accuracy of the gamma function to describe lactation curve of Yankasa ewes was investigated using milk production data obtained from 168 ewes with either complete or incomplete 84 day lactation records. Ewes were daily hand milked after over-night separation from lamb and thorough disinfection of the udder. The daily milk yield on the average was estimated from the weekly total yield. The effect of type of birth, parity, season of birth and lactation length on the components of lactation curve (a, b, c and s) were analysed by least-square procedures. All factors except parity significantly (p<0.01) influenced the curve parameters. The goodness of fit of the function did not differ between the two classes of varying duration of lactation; incomplete lactation however, showed a lower persistency and as expected lower level of production. Correlations ($r_p$) between lamb weight gain and milk yield using the weight records from lamb weighed at weekly intervals indicated a high and positive relationship in the early lactation that decreased in intensity as the lactation advanced.

Imaging of a Defect in Thin Plates Using the Time Reversal of Single Mode Lamb Wave: Simulation

  • Jeong, Hyun-Jo;Lee, Jung-Sik;Bae, Sung-Min;Lee, Hyun-Ki
    • 비파괴검사학회지
    • /
    • 제30권3호
    • /
    • pp.261-270
    • /
    • 2010
  • This paper presents an analytical investigation for a baseline-free imaging of a defect in plate-like structures using the time-reversal of Lamb waves. We first consider the flexural wave (A0 mode) propagation in a plate containing a defect, and reception and time reversal process of the output signal at the receiver. The received output signal is then composed of two parts: a directly propagated wave and a scattered wave from the defect. The time reversal of these waves recovers the original input signal, and produces two additional side bands that contain the time-of-flight information on the defect location. One of the side band signals is then extracted as a pure defect signal. A defect localization image is then constructed from a beamforming technique based on the time-frequency analysis of the side band signal for each transducer pair in a network of sensors. The simulation results show that the proposed scheme enables the accurate, baseline-free detection of a defect, so that experimental studies are needed to verify the proposed method and to be applied to real structure.

Complete genome sequence of Salmonella enterica strain K_SA184, multidrug resistance bacterium isolated from lamb (Ovis aries)

  • Kim, Hyeri;Cho, Jae Hyoung;Cho, Jin Ho;Song, Minho;Shin, Hakdong;Kim, Sheena;Kim, Eun Sol;Kim, Hyeun Bum;Lee, Ju-Hoon
    • Journal of Animal Science and Technology
    • /
    • 제63권1호
    • /
    • pp.194-197
    • /
    • 2021
  • Salmonella enterica is a representative foodborne pathogen in the world. The S. enterica strain K_SA184 was isolated from the lamb (Ovis aries), which was collected from a local traditional market in South Korea. In this study, the S. enterica strain K_SA184 was sequenced using PacBio RS II and Illumina NextSeq 500 platforms. The final complete genome of the S. enterica strain K_SA184 consist of one circular chromosome (4,725,087 bp) with 52.3% of guanine + cytosine (G + C) content, 4,363 of coding sequence (CDS), 85 of tRNA, and 22 of rRNA genes. The S. enterica strain K_SA184 genome includes encoding virulence genes, such as Type III secretion systems and multidrug resistance related genes.

Propagating and evanescent waves in a functionally graded nanoplate based on nonlocal theory

  • Cancan Liu;Jiangong Yu;Bo Zhang;Xiaoming Zhang;Xianhui Wang
    • Advances in nano research
    • /
    • 제14권5호
    • /
    • pp.463-474
    • /
    • 2023
  • The purpose of this paper is to present the analysis of propagating and evanescent waves in functionally graded (FG) nanoplates with the consideration of nonlocal effect. The analytical integration nonlocal stress expansion Legendre polynomial method is proposed to obtain complete dispersion curves in the complex domain. Unlike the traditional Legendre polynomial method that expanded the displacement, the presented polynomial method avoids employing the relationship between local stress and nonlocal stress to construct boundary conditions. In addition, the analytical expressions of numerical integrations are presented to improve the computational efficiency. The nonlocal effect, inhomogeneity of medium and their interactions on wave propagation are studied. It is found that the nonlocal effect and inhomogeneity of medium reduce the frequency bandwidth of complex evanescent Lamb waves, and make complex evanescent Lamb waves have a higher phase velocity at low attenuation. The occurrence of intersections of propagating Lamb wave in the nonlocal homogeneous plate needs to satisfy a smaller Poisson's ratio condition than that in the classical elastic theory. In addition, the inhomogeneity of medium enhances the nonlocal effect. The conclusions obtained can be applied to the design and dynamic response evaluation of composite nanostructures.

램파와 압전소자 극성을 사용한 강구조의 실시간 균열손상 감지기법 개발 (Baseline-Free Crack Detection in Steel Structures using Lamb Waves and PZT Polarity)

  • 손훈;김승범
    • 한국지진공학회논문집
    • /
    • 제10권6호
    • /
    • pp.79-91
    • /
    • 2006
  • 이 연구에서는 강교량과 같은 토목 구조물에서 유도파의(Guided waves)한 종류인 램파(Lamb wave)를 이용하여 실시간으로 균열손상을 감지할 수 있는 새로운 비파괴 검사방법을 제안한다. 기존의 유도파를 이용한 기술들은, 손상을 감지하기 위해 비손상 상태의 자료를 저장하고 이를 새로이 얻어진 결과와 비교하는 방법을 사용함으로써 잠재적인 손상을 진단해 왔다. 그러나, 공용중인 강구조물은 다양한 하중 뿐 아니라 상시로 변화하는 자연환경에 노출되어 있기 때문에 동일한 비손상 상태의 응답을 얻는 것이 매우 어려우며 이러한 방법을 적용할 경우 오보(false alarm)의 우려도 매우 높다고 할 수 있다. 따라서 이 연구에서는 보다 안정적인 손상감지기법을 개발하기 위해 기존에 얻어진 초기치를 이용하지 않으면서 실시간으로 손상 여부를 판단할 수 있는 방법을 제안하고자 한다. 이 연구에서 제안된 감지 기술은, 압전소자의 극성과 판파의 특성을 이용하는 것으로 얇은 판의 양면에 부착된 압전소자를 통하여 균열손상에 의한 신호를 선택적으로 감지해 내는 데에 그 목적이 있다. 균열이 발생한 판에서 진행하는 판파는 균열로 인한 판의 두께변화로 인해 모드 변화를 일으키게 되는데, 제안된 감지기법으로 이러한 모드 변화만을 선택적으로 추출할 수 있다. 다양한 수치해석과 실험을 통해 이 연구에서 제안된 손상감지기법의 효율성과 적용성을 입증한다.

낙엽송을 가해하는 한국미기록 낙엽송잎벌(신칭)(벌목, 잎벌과)의 발견 (Discovery of Pachynematus itoi Okutani (Hymenoptera: Tenthredinidae) infesting Larix kaempferi(Lamb.) Carriere from Korea)

  • 박지두;;박일권;신상철;변봉규
    • 한국응용곤충학회지
    • /
    • 제46권1호
    • /
    • pp.1-4
    • /
    • 2007
  • 우리나라중부지방에서 낙엽송의 잎을 가해하며 피해를 발생시키는 잎벌과의 낙엽송잎벌(신칭)을 처음으로 발견하여 보고한다. 본 연구를 통해 확인된 피해범위 및 관찰된 생활사 결과를 보고하며 성충의 암수 외부형태 특징을 도해하였다.

MANUFACTURE AND CHARACTERISTICS OF SNACK-TYPE PRODUCTS CONTAINING MEAT AND STARCH

  • Cho, Soo-Hyun
    • 한국축산식품학회:학술대회논문집
    • /
    • 한국축산식품학회 1997년도 제18차 정기총회 및 학술발표회
    • /
    • pp.19-39
    • /
    • 1997
  • Extrusion conditions were optimized for blends of ground lamb and starch using a single-screw extruder for the purpose of producing expanded snack-type products. A central composite rotatable response surface methodology(RSM) design was used with variation in feed moisture, process temperature, and screw speed. The three variables significantly affected one or more of the measured physical properties of extrudates. The optimum conditions for minimum shear force values were 26.5% feed moisture, $148^{\circ}C$ process temperature, and 134 rpm screw speed. Lean ground beef, chicken, goat, lamb or mutton was blended with corn starch, and extruded at the optimum condition established from RSM experiments. Physical/rheological properties were generally similar, water activity was low (<0.12) and total aerobic plate counts were <10 for all products. Extrudates containing chicken had the highest ratio of polyunsaturated fatty acids to saturated fatty acids, whereas those containing beef had the highest ratio of monounsaturated fatty acids to saturated fatty acids. Sensory data indicated that texture was acceptable and flavor characteristics were not different among the products.

  • PDF

Impact Localization for a Composite Plate Using the Spatial Focusing Properties of Advanced Signal Processing Techniques

  • Jeong, Hyunjo;Cho, Sungjong
    • 비파괴검사학회지
    • /
    • 제32권6호
    • /
    • pp.703-710
    • /
    • 2012
  • A structural health monitoring technique for locating impact position in a composite plate is presented in this paper. The method employs a single sensor and spatial focusing properties of time reversal(TR) and inverse filtering(IF). We first examine the spatial focusing efficiency of both approaches at the impact position and its surroundings through impact experiments. The imaging results of impact localization show that the impact location can be accurately estimated in any position of the plate. Compared to existing techniques for locating impact or acoustic emission source, the proposed method has the benefits of using a single sensor and not requiring knowledge of anisotropic material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in other ultrasonic testing of plate-like structures.