• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.699-702
• /
• 1999

This paper represents the application of a virtual plant simulator and a Ladder Diagram of PLC. A target plant is a material transport car that repeatedly conveys along the rails. The whole process is automatically operated by PLC. The simulation system consists of the POSFA PLC and the virtual plant simulator. We demonstrate that operation of a LD program corresponds to operation of the virtual plant simulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.124.4-124
• /
• 2001

It needs a skillful experience to design and implement sequential circuits with a relay circuit or LD (Ladder Diagram). One makes out the operation of relay contacts sequentially in case of analyzing a relay circuit or LD. Still more, the design and analyzing of a complex relay circuit or LD are difficult. In this paper, we propose the EMFG (Extended Mark Graph) representation on relay circuits and LD.

• Journal of the Society of Disaster Information
• /
• v.4 no.2
• /
• pp.30-38
• /
• 2008

The trend of constructing skyscraper has arisen to the offistel and apartment complex due to the lack of exploitable land and urbanization. But, the phenomenon of the multi-story buildings is different from the regular building because of the possibility of mass disaster in fire. Therefore, Analyzing and comparing our actual condition and Japanese, It is going to be suggested that the introduction of fire escape ladder for residents in emergency.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2402-2404
• /
• 1998

This paper proposes a translation method that converts ladder diagrams to binary executable codes for PLC (programmable logic controller)s. A PLC based on general purpose DSP(digital signal processor) validates the method. We performed a benchmark on the system that compares the execution time of the interpretation method and ours. Experimenal result shows how fast this method executes programs that consist of codes generated.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.133-140
• /
• 2017

The purpose of this study is to provide a basic data of clothing development that can improve the satisfaction of the body shape by examining the subjective evaluation and characteristics of each type. The types of body shape of middle-aged women were analyzed as four types: elasticity loss ladder type, flat rectangular type, thin reverse ladder type, and upper body obesity inverted triangle type. The elasticity loss ladder type was developed with the lower body, and it was analyzed that the legs size such as the thighs and claves were large, the abdomen was protruded, and especially the underbelly appeared. The flat rectangular type was the largest of the four types, and was the skinny type. The width was larger than the thickness of the body, and the difference between the hip circumference and the waist circumference was small, and it was classified into a flat rectangular shape. The thin reverse ladder type was the smallest of the four types, the upper body was developed, the back had weight, and the body was leaning forward. And the lower body and leg were poor and the abdomen was protruding. Finally, the upper body obesity inverted triangular was the highest type of BMI index among 4 types. All of subjects belong to the mild and middle obesity, and the second was the smallest but the most weighted type among 4 types. They had the fat body and big bust, the upper body was developed, and the lower body and legs were analyzed to be poor body shape. Based on the body shape of middle-aged women, it is necessary to develop designs and patterns that can cover the shortcomings of body shape.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.6
• /
• pp.91-98
• /
• 2004

This paper proposes a PCB plane model for generic SPICE circuit simulators. The proposed model reflects two frequency-dependent losses, namely skin and dielectric losses. After power/ground plane pair is divided into arrays of unit-cells, each unit-cell is modeled using a transmission line and two loss models. The loss model is composed of a resistor for DC loss, series HL ladder circuit for skin loss and series RC ladder circuit for dielectric loss. To verify the validity of the proposed model, it is compared with SPICE ac analysis using frequency-dependent resistors. Also, we show that the estimation results using the proposed model have a good correlation with that of VNA measurement for the typical PCB stack-up structure of general desktop PCs. With the proposed model, not only ac analysis but also transient analysis can be easily done for circuits including various non-linear/linear devices since the model consists of passive elements onl.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.981-994
• /
• 2016

Two field research stations based upon atmospheric corrosivity monitoring combined with reinforced concrete corrosion rate sensors have been established in Kuwait. This was established for the purpose of remote monitoring of building materials performance for concrete under Kuwait atmospheric environment. The two field research sites for concrete have been based upon an outcome from a research investigation intended for monitoring the atmospheric corrosivity from weathering station distributed in eight areas, and in different regions in Kuwait. Data on corrosivity measurements are essential for the development of specification of an optimized corrosion resistance system for reinforced concrete manufactured products. This study aims to optimize, characterize, and utilize long-term concrete structural health monitoring through on line corrosion measurement and to determine the feasibility and viability of the integrated anode ladder corrosion sensors embedded in concrete. The atmospheric corrosivity categories supported with GSM remote data acquisition system from eight corrosion monitoring stations at different regions in Kuwait are being classified according to standard ISO 9223. The two nominated field sites where based upon time of wetness and bimetallic corrosion rate from atmospheric data where metals and rebar's concrete are likely to be used. Eight concrete blocks with embeddable anodic ladder corrosion sensors were placed in the atmospheric zone adjacent to the sea shore at KISR site. The anodic ladder corrosion rate sensors for concrete were installed to provide an early warning system on prediction of the corrosion propagation and on developing new insights on the long-term durability performance and repair of concrete structures to lower labor cost. The results show the atmospheric corrosivity data of the environment and the feasibility of data retrieval of the corrosion potential of concrete from the embeddable sets of anodic ladder corrosion sensors.

• The Journal of Korean Association of Computer Education
• /
• v.21 no.6
• /
• pp.39-47
• /
• 2018

This paper dealt with investigating the number of minimal spanning ladders originated from ladder game and their properties as well as the related computational thinking aspects. The author modified the filtering techniques to enhance Mathematica project where a new type of graph was generated based on the algorithm using a generator of firstly found minimal spanning graph by repeatedly applying independent ladder operator to a subsequence of ladder sequence. The newly produced YC graphs had recursive and hierarchical graph structures and showed the properties of edge-symmetric. As the computational complexity increased the author divided the whole search space into the each floor of the newly generated minimal spanning graphs for the (5, 10) YC graph and the higher (6, 15) YC graph. It turned out that the computational thinking capabilities such as data visualization, abstraction, and parallel computing with Mathematica contributed to enumerating the new YC graphs in order to investigate their structures and properties.

• Journal of Korean Clinical Nursing Research
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2018

Purpose: This study was done to explore the relationship between expectations of the clinical ladder system (CLS), career commitment and turnover intention in nurses employed in small-medium sized hospitals. Methods: Participants were 154 nurses from 3 small-medium sized hospitals in Gyeonggi Province and Gwangju City. From February, 8 to April, 14, 2017, self-report questionnaires were collected and analyzed using frequency, t-test, ANOVA, $Scheff{\acute{e}}$ test, and Person correlation coefficients. Results: Of the participant nurses, 61% perceived the CLS as needed. The mean score for expectation of CLS, career commitment, and turnover intention on 5-point scale were 3.38, 3.17, 3.21, respectively. There were no significant differences in expectation of CLS according to general characteristics, but career commitment and turnover intention did show significant differences depending on age, position, type of work shift. Expectation of CLS correlated positively with career commitment (r=.23, p=.005), and career commitment correlated negatively with turnover intention (r=-.49, p<.001). Conclusion: The results of this study show that there is a need to adopt the clinical ladder system to improve career commitment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.741-749
• /
• 2014

This paper proposes a machine vision module for PLCs (Programmable Logic Controllers). PLC is the industrial controller most widely used in factory automation system. However most of the machine vision systems are based on PC (Personal Computer). The machine vision system embedded in PLC is required to reduce the cost and improve the convenience of implementation. In this paper, we newly propose a machine vision module based on PLC. The image processing libraries are implemented and integrated with the PLC programming tool. In order to interface the libraries with ladder programming, the ladder instruction set was also designed for each vision library. By use of the developed system, PLC users can implement vision systems easily by ladder programming. The developed system was applied to sample inspection system to verify the performance. The experimental results show that the proposed system can reduce the cost of installing as well as increase the ease-of-implementation.