• Korean Journal of Plant Resources
• /
• v.18 no.2
• /
• pp.279-284
• /
• 2005

The study was conducted to investigate the correlation and regression analysis between the factors - diameter, hight and crown width - and collection amount of Rhus lacquer by the sex of Rhus verniciflua. The relationship between the diameter and the collection amount of the lacquer by the sex of the lacquer tree indicated that, for both of the male and the female, the lacquer amount was likely to increase as the diameter got larger. In general, the male trees tended towards the higher amount of the lacquer than the female. The relationship between the crown width and the collection amount of the lacquer by the sex showed little difference. As the crown became wider, however, the lacquer amount showed the increasing trend. The regression analysis by the sex of the tree indicated that the major factors of the female had larger influence on the lacquer amount than those of the male. The no differences of statistical significance were found among the diameter, the height, the crown width, and the lacquer amount.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.22-44
• /
• 2022

Lacquer, in addition to high-end crafts such as lacquerware inlaid with mother-of-pearl, was an important strategic material used in a wide range of fields such as industry, architecture, and munitions during the Japanese colonial era. In particular, as the demand for lacquer used in munitions soared in the 1940s when the war started, a ticket system was introduced to restrict its distribution. Meanwhile, Japan experienced a chronic shortage of lacquer as a result of the rapidly increasing demand for it, and thus went on to import Chinese lacquer after the late 19th century. After the 1910s, the market share of Chinese lacquer reached 90%, and the local situation in China began to affect the supply and demand for lacquer in Japan. To counteract the issue, the Japanese government increased the production of lacquer in Joseon. As for the project to increase lacquer production in Joseon, objective indicators were prepared through a number of tests in the 1910s and 20s, which paved the way for the project to begin in earnest in the 1930s. Lacquer trees were planted and training classes on how to collect lacquer were held throughout the country. The Japanese government promoted the lacquer production industry as a promising side job for Koreans. The project, implemented in various parts of the country, reaped fruitful results, and it provided the basis for lacquer production in Korea that has continued to this day. At that time, the major regions in the southern part of the country where the project was concentrated were Wonju, Okcheon, and Hamyang, regions that are still known today as major production sites. The improved method of collecting lacquer taught to Koreans by the Japanese has now become the main method of collecting lacquer in Korea. This study attempts to identify the current status of the project to increase lacquer production through various records from the Japanese colonial era with a view to contributing to the study of modern lacquer craft history.

• Korean Journal of Plant Resources
• /
• v.21 no.1
• /
• pp.87-90
• /
• 2008

The purpose of this experiment is to understand a possibility for the techniques of collecting the Korean Rhus lacquer by the traditional method(Hwachil) against the diminishing lacquer industry. Hwachil method, making use of fire to collect lacquer, is practiced at only some areas, but the lacquer is very efficacious for foods and oriental medicine. A comparative experiment between traditional method and new machine method by processing unit 5 kg of lacquer tree was made to improve Hwachil method technically. The results showed that the machine method produced more about 45% of lacquer than the traditional one. The traditional method, moreover, needed intense labour quality and high leveled techniques, which caused to bring physical sufferings. In comparison with the traditional method for the collecting time required, the machine one showed to take more than minutes per a unit. But the machine method was easy and convenient to handle the machine without special techniques.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.449-457
• /
• 2016

A stoneware bottle was recovered from the Incheon Yeongheungdo Shipwreck in 2013. Primary observations showed that this object had a sealed opening and was covered with a foreign material. After it was cleaned via mechanical and chemical methods, wave patterns were observed on the outer surface of the bottle and a yellowish-brown transparent material was found within. In this paper, the process of conserving the stoneware bottle and the analysis conducted on the unknown material found within is explained. The conservation process included steps such as cleaning, desalination and restoration. After of the missing area located at the rim, the original shape of the bottle was made clear. In addition, the unknown inner material was analyzed using FT-IR and GC-MS. Results showed that the material is similar to golden lacquer. It is speculated that the Yeongheungdo Ship had wrecked during the Unified Silla period while carrying a bottle loaded with golden lacquer.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.606-616
• /
• 2021

From the collection of the National Kimhae Museum, qualitative analyses using microscopic observation, SEM-EDS, Raman spectroscopy, FT-IR-ATR spectroscopy, and GC-MS were conducted on three burnished red potteries-Jeoksaekmaoyeonwa burnished red pottery (Neolithic age red pottery), Dandomaoyeonwan burnished red pottery(Bronze age red pottery) and Jeoksaekmaoyeongajimun burnished red pottery(Bronze age red pottery)-to investigate the components of the red pigments and the binder. After the layers of the primer were separated from the red surface, crystals of red pigment particles and minerals were found on the red surface. Through SEM-EDS, Raman estimates that the red pigment is Among soil pigments with iron oxide(Fe₂O₃) as the main color development source, Red Ocher(Fe₂O₃). A band characteristic of the Urushiol polymer was detected in the FTIR-ATRspectra(4000~600cm^-1), GC-MS analysis confirmed the presence of the benzenemethanol-2-prophenyl, 4-heptylphenol, 1-tetracecanol, heptafluorobutyric texidecane, all of which are the ingredients of the directional structure of the lacquer present in the red layer. Therefore, it seemed that the three burnished red pottery: Jeoksaekmaoyeonwan pottery(Neolithic age burnished red pottery), Dandomaoyeonwan pottery(bronze age burnished red pottery) and the Jeoksaekmaoyeongajimun pottery(bronze age burnished red pottery) made by mixing minerals and Red Ocher(Fe₂O₃), with lacquer.

• Conservation Science in Museum
• /
• v.19
• /
• pp.69-82
• /
• 2018

The gilt-bronze standing Buddha and bronze standing Buddha statues excavated from Yeongguksa Temple in Yeongdong, currently held in the collection of the Cheongju National Museum, underwent conservation treatment after scientific study. Materials analysis showed that the gilt-bronze statue was made with a ternary alloy of copper, tin, and lead, while the bronze statue is of a binary alloy of copper and tin. The analysis also revealed that the bronze statue contains gold, and it is therefore recommended to change its description to gilt-bronze standing Buddha. The gilt-bronze statue appears to have been made with lead produced in Korea. The material observed on the surface that is presumed to have been used as an adhesive for the gold coloring is thought to be lacquer. For conservation treatment, the statues were minimally cleaned using physical and chemical methods and were treated through consolidation and protective coating.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.133-143
• /
• 2022

In this study, we analyzed the rickshaw (Owned by the Daegu Modern History Museum) by measuring each material. The purpose of the study was to identify the materials in modern cultural assets that utilize a variety of materials in a complex way, and establish basic data for preservation and management. Using portable X-ray fluorescence analyzers (P-XRF), species identification, fiber identification, paint film analysis (microscope observation, SEM-EDS, FTIR) on metal, wood, fiber and paint was carried out. Brass, an alloy of Copper, Zinc and Iron, was measured in the metal parts. Further, wooden parts, such as Oak (Quercus acutissima), Japanese Cedar (Cryptomeria japonica), Bamboo (Bambusoideae). Torreya nucifera (Torreya spp.) were identified in the body. Fiber parts consisted mainly of cotton, but some parts were also made of leather. In terms of paint, rickshaws were applied with multiple layers, using cashew (synthetic paint used in place of lacquer). In sum, the rickshaw body part appeared to overlap with layers of fiber, metal (soild), paint, and colored (black, red) layer.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.208-215
• /
• 2000

In order to improve 'Salso' method (conventional tapping method) which was very inefficient in the aspects of collection time and labor, this study was carried out to investigate the effect of the application date and the distance from treatment point in the lactree(Rhus verniciflua) treated with 10% CEPA and to decide the possibility of application of the technique in the field. Bark thickness was significantly increased to the part 40cm above and below the treatment point, but urushiol content was increased to the part 20cm above and 10cm below the zone treated with 10% CEPA. The urushiol content of the bark was highest at 5cm above the treated zone and decreased in the order of 10, 20, and 40cm. And the urushiol contents of the bark of the upper part were higher than that of the low part. The effects of CEPA on bark thickness were similar to urushiol contents. Urushiol production of lactree is highly dependent on climatic conditions and particularly on the precipitation, and duration of sunshine. Ten percent of CEPA-lanolin pastes which was treated on June 16 affected bark anatomy and urushiol contents, while the treatment on August 24 did not affect. In the Rhus verniciflua treated with 10% CEPA, the urushiol contents was initially increased from 7 days after treatment, continued for the 4 weeks, and then slight decrease occurred at 5 weeks after the treatment. We measured a total sap yield by Salso method in lactree treated with 10% CEPA. By applying 10% CEPA, the sap yield was increased 3-4 times compared to that of untreated trees in the first tapping. But the relative ratio was gradually decreased from the second tapping to sixth, and after seventh tapping, the untreated trees secreted more sap than the treated trees. We discussed about the causes.