• 한국지반공학회논문집
• /
• 제27권2호
• /
• pp.73-80
• /
• 2011

본 논문에서는 지오그리드 감쌈쇄석말뚝 공법의 현장적용을 위한 지오그리드 감쌈 제작방법 에 관한 실험적 내용을 다루었다. 지오그리드 감쌈 제작방법에 따른 지오그리드 쇄석기둥의 지지력 증가 특성과 변형특성 평가를 위해 중대형 압축시험을 수행하였다. 실험결과를 통해 지오그리드 감쌈 제작시 지오그리드 겹침 제작은 효율적인 방법임을 알 수 있으며,쇄석기둥 상부영역에서 지오그리드 감쌈 제작방법에 따른 접합부위의 품질관리 방안이 중요함을 알 수 있다. 실험결과를 통해 현장적용시 GESC의 충분한 보강효과를 발휘하기 위한 지오그리드 감쌈 제작 방안을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.923-937
• /
• 2014

The rational finite element method is different from the standard finite element method, which is constructed using basic solutions of the governing differential equations as interpolation functions in the elements. Therefore, it is superior to the isoparametric approach because of its obvious physical meaning and accuracy; it has successfully been applied to the isotropic elasticity problem. In this paper, the formulation of rational finite elements for plane orthotropic elasticity problems is deduced. This method is formulated directly in the physical domain with full consideration of the requirements of the patch test. Based on the number of element nodes and the interpolation functions, different approaches are applied with complete polynomial interpolation functions. Then, two special stiffness matrixes of elements with four and five nodes are deduced as a representative application. In addition, some typical numerical examples are considered to evaluate the performance of the elements. The numerical results demonstrate that the present method has a high level of accuracy and is an effective technique for solving plane orthotropic elasticity problems.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.444-450
• /
• 2010

The traditional approach to inverting aerosol extinction makes use of the assumption of a constant LIDAR ratio in the entire Mie-LIDAR signal profile using the Fernald method. For the large uncertainty in the cloud optical depth caused by the assumed constant LIDAR ratio, an not negligible error of the retrieved aerosol extinction below the cloud will be caused in the backward integration of the Fernald method. A new algorithm to determine aerosol extinction below a cirrus cloud from Mie-LIDAR signals, based on a new cloud boundary detection method and a Mie-LIDAR signal modification method, combined with the backward integration of the Fernald method is developed. The result shows that the cloud boundary detection method is reliable, and the aerosol extinction below the cirrus cloud found by inverting from the modified signal is more efficacious than the one from the measured signal including the cloud-layer. The error due to modification is less than 10% taken in our present example.

• Nuclear Engineering and Technology
• /
• 제43권4호
• /
• pp.343-354
• /
• 2011

It is critically important to identify unexpected loose parts in a nuclear reactor pressure vessel, since they may collide with and cause damage to internal structures. Mass estimation can provide key information regarding the kind as well as the location of loose parts. This study proposes a mass estimation method based on an artificial neural network (ANN), which can overcome several unresolved issues involved in other conventional methods. In the ANN model, input parameters are the discrete cosine transform (DCT) coefficients of the auto-power spectrum density (APSD) of the measured impact acceleration signal. The performance of the proposed method is then evaluated through application to a large-sized plate and a 1/8-scaled mockup of a reactor pressure vessel. The results are compared with those obtained using a conventional method, the frequency ratio (FR) method. It is shown that the proposed method is capable of estimating the impact mass with 30% lower relative error than the FR method, thus improving the estimation performance.

• Annals of Laboratory Medicine
• /
• 제38권6호
• /
• pp.518-523
• /
• 2018

Background: Lipemia, a significant source of analytical errors in clinical laboratory settings, should be removed prior to measuring biochemical parameters. We investigated whether lipemia in serum/plasma samples can be removed using a method that is easier and more practicable than ultracentrifugation, the current reference method. Methods: Seven hospital laboratories in Spain participated in this study. We first compared the effectiveness of ultracentrifugation ($108,200{\times}g$) and high-speed centrifugation ($10,000{\times}g$ for 15 minutes) in removing lipemia. Second, we compared high-speed centrifugation with two liquid-liquid extraction methods-LipoClear (StatSpin, Norwood, USA), and 1,1,2-trichlorotrifluoroethane (Merck, Darmstadt, Germany). We assessed 14 biochemical parameters: serum/plasma concentrations of sodium ion, potassium ion, chloride ion, glucose, total protein, albumin, creatinine, urea, alkaline phosphatase, gamma-glutamyl transferase, alanine aminotransferase, aspartate-aminotransferase, calcium, and bilirubin. We analyzed whether the differences between lipemia removal methods exceeded the limit for clinically significant interference (LCSI). Results: When ultracentrifugation and high-speed centrifugation were compared, no parameter had a difference that exceeded the LCSI. When high-speed centrifugation was compared with the two liquid-liquid extraction methods, we found differences exceeding the LCSI in protein, calcium, and aspartate aminotransferase in the comparison with 1,1,2-trichlorotrifluoroethane, and in protein, albumin, and calcium in the comparison with LipoClear. Differences in other parameters did not exceed the LCSI. Conclusions: High-speed centrifugation ($10,000{\times}g$ for 15 minutes) can be used instead of ultracentrifugation to remove lipemia in serum/plasma samples. LipoClear and 1,1,2-trichlorotrifluoroethane are unsuitable as they interfere with the measurement of certain parameters.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2015년도 자성 및 자성재료 국제학술대회
• /
• pp.145-146
• /
• 2015

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 자성 및 자성재료 국제학술대회
• /
• pp.53-54
• /
• 2014

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권5호
• /
• pp.310-316
• /
• 2013

This paper reports a sinusoidal $180^{\circ}$ drive for a permanent magnet (PM) brushless motor employing automatic angle compensator to suppress the driving loss during the wide-range load operation. The proposed drive of the sinusoidal $180^{\circ}$ PM Brushless motor reduced the amplitude of the 3-phase current by compensating for the lead-angle of the fundamental waves of the 3-phase PWM signal. The conventional lead-angle method was implemented using the fixed angle or memorized table, whereas the proposed method was automatically compensated by calculating the angle of the current and voltage signal. The algorithm of the proposed method was verified in a 30 W PM brushless motor system using a PSIM simulator. The efficiency of the conventional method was decreased 90 % to 60 %, whereas that of proposed method maintained approximately 85 % when the load shift was 0 to $0.02N{\cdot}m$. Using an FPGA prototype, the proposed method was evaluated experimentally in a 30 W PM brushless motor system. The proposed method maintained the minimum phase RMS current and 79 % of the motor efficiency under 0 to $0.09N{\cdot}m$ load conditions. The proposed PM brushless motor driving method is suitable for a variety of applications with a wide range of load conditions.

• 대한세포병리학회지
• /
• 제15권2호
• /
• pp.86-91
• /
• 2004

Liquid-Based Uterine Cervicovaginal Cytology is known to be a sensitive and effective screening method for cervical neoplasm $MonoPrep^{TM},\;ThinPrep^{TM},\;and\;SurePath^{TM}$ methods have been recently used as Liquid-Based Uterine Cervicovaginal Cytology techniques, and the $SurePath^{TM}$ method has been used in Sung-Yoon Reference Laboratory since 2003. The goal of Liquid-Based Uterine Cervicovaginal Cytology is to separate cervical epithelial cells from non-target cells, red blood cells and neutrophils. This report describes a study which evaluated cellularity, stainablilty, and cellular changes of epithelial cels in samples processed using a manual technique as compared to samples processed using $SurePath^{TM}$ automated method. The samples processed by means of a manual technique contained a cellularity of epithelial cells similar to that of the samples processed using the $SurePath^{TM}$ automated method. In addition, we compared variable density gradient reagents, including dextran, dextrose, and sucrose, to $SurePath^{TM}$ gradient media in order to evaluate cell fractionation and cellularity of epithelial cells. 10% dextran of gradient media shows good fractionation. The samples processed with 10% dextran demonstrated sufficient cellularity of epithelial cells and shows the fewest cellular changes. In conclusion, using a manual technique on these samples is easier to read than those results obtained using the $SurePath^{TM}$ automated method.

• Structural Engineering and Mechanics
• /
• 제62권1호
• /
• pp.11-20
• /
• 2017

The base force element method (BFEM) is a new finite element method. In this paper, a degenerated 4-mid-node plane element from concave polygonal element of BFEM was proposed. The performance of this quadrilateral element with 4 mid-edge nodes in the BFEM on complementary energy principle is studied. Four examples of linear elastic analysis for plane frame structure are presented. The influence of aspect ratio of the element is analyzed. The feasibility of the 4 mid-edge node element model of BFEM on complementary energy principles researched for plane frame problems. The results using the BFEM are compared with corresponding analytical solutions and those obtained from the standard displacement finite element method. It is revealed that the BFEM has better performance compared to the displacement model in the case of large aspect ratio.