• 품질경영학회지
• /
• 제13권2호
• /
• pp.48-55
• /
• 1985

This paper intends to decide the optimum OC curves and to find the minimized ${\alpha}$, ${\beta}$-risk based upon the Linear Cost Model (L.C.M.) for the destructive or nondestructive acceptance sampling inspection plan. For the solution from the L.C.M., we assume the uniform distribution as a Prior-distribution and use numerical analysis by computer.

• 대한수학회보
• /
• 제53권1호
• /
• pp.247-262
• /
• 2016

We propose and analyze spectral and pseudo-spectral Jacobi-Galerkin approaches for weakly singular Volterra integral equations (VIEs). We provide a rigorous error analysis for spectral and pseudo-spectral Jacobi-Galerkin methods, which show that the errors of the approximate solution decay exponentially in $L^{\infty}$ norm and weighted $L^2$-norm. The numerical examples are given to illustrate the theoretical results.

• Geomechanics and Engineering
• /
• 제32권2호
• /
• pp.137-144
• /
• 2023

The current article studied wave propagation in a nonlocal porous thermoelastic half-space with temperature-dependent properties. The problem is solved in the context of the Green-Lindsay theory (G-L) and the Lord- Shulman theory (L-S) based on thermoelasticity with memory-dependent derivatives. The governing equations of the porous thermoelastic solid are solved using normal mode analysis with an eigenvalue approach. In order to illustrate the analytical developments, the numerical solution is carried out, and the effect of local parameter and temperature-dependent properties on the physical fields are presented graphically.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.34-41
• /
• 1999

This paper is focused on numerical analysis for perforated plate with irregular section based on Kirchhoff's fundamental equations of a circular plate. The dimensions of analysis model are as following; 1) radius:100cm, 2) hole in center:20cm, 3)thickness: l0cm and variable and have a simple support in boundary. The theoretical results are compared with data obtained by the F.2.M analysis. Both data have good agreement with each other.

• 한국수자원학회논문집
• /
• 제45권3호
• /
• pp.291-300
• /
• 2012

댐 붕괴 직후에 댐 붕괴 근역에서의 댐 붕괴파 및 댐 붕괴파로 인한 하상변동을 추적하기 위하여 RANS를 지배방정식으로 하는 FLOW-3D를 이용한 3차원 수치모의를 수행하였다. 특히 이동상에서의 하상변동과 그 하상변동으로 인한 홍수파의 변동을 고정상에서의 해석결과와 비교하였다. 그 해석 결과를 정리하면 다음과 같다. 첫째, L자형 실험수로에서의 홍수파 해석 및 이동상 실험수로에서의 홍수파와 하상변동 해석 결과는 해당 수리실험을 만족스럽게 재현하고 있다. 둘째, 부유사의 농도는 홍수파의 전면에서 가장 높은 값을 보이며, 하상침식은 흐름이 급변하는 댐 직하류 지점에서 가장 크게 발생한다. 수로의 상류에서 발생하는 부유사로 인해 하류에서는 침식과 퇴적이 번갈아서 발생한다. 홍수파가 도달하는 초기에는 L자형 만곡부의 내측에서 침식이 우세하게 발생하나, 시간이 지나며 침식은 점차 만곡부의 외측으로 이동하는 양상을 보인다. 셋째, L자형 이동상에서의 홍수파는 하상의 침식 및 퇴적으로 인해 고정상에서의 홍수파에 비해 그 전파가 지체되며 홍수위가 크게 상승한다.

• Structural Engineering and Mechanics
• /
• 제72권3호
• /
• pp.367-382
• /
• 2019

This paper presents experimental and analytical investigations on additional fixed-end rotations resulting from the strain penetration of high-strength reinforcement in reinforced concrete (RC) beam-column connections under monotonic loading. The experimental part included the test of 18 interior beam-column connections with straight long steel bars and 24 exterior beam-column connections with hooked and headed steel bars. Rebar strains along the anchorage length were recorded at the yielding and ultimate states. Furthermore, a numerical program was developed to study the effect of strain penetration in beam-column connections. The numerical results showed good agreement with the test results. Finally, 87 simulated specimens were designed with various parameters based on the test specimens. The effect of concrete compressive strength ($f_c$), yield strength ($f_y$), diameter ($d_b$), and anchorage length ($l_{ah}$) of the reinforcement in the beam-column connection was examined through a parametric study. The results indicated that additional fixed-end rotations increased with a decrease in $f_c$ and an increase in $f_y$, $d_b$ and $l_{ah}$. Moreover, the growth rate of additional fixed-end rotations at the yielding state was faster than that at the ultimate state when high-strength steel bars were used.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.195-198
• /
• 1996

This paper is studid the flow analysis of cardio vascular assist device. The experimental study is carried out to measure velocity profiles, Shear stress distributions and Velocity Vector for the flowrare of 4l/min, the frequency of 0.5Hz, the stroke volume of 60ml, the inlet and outlet pressure of 100mmHg by the L.D.V and P.I.V system. These results are agreed with the numerical simulations.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.75-80
• /
• 2005

The present work was undertaken to numerically analyze the defrosting phenomena of windshield glass. In order to analysis the phase change from frost to water on windshield glass by discharging hot air from a defroster nozzle, the flow and the temperature field of the cabin interior, the heat transfer through the windshield glass, and the phase change of frost should be solve simultaneously. In the present work, the flow field was obtained by solving 3-D incompressible Navier-Stokes equations, and the temperature field was computed from the incompressible energy equation. The phase change process was solved by the enthalpy method. For the code validation, the temperature and the phase change of the driven cavity were calculated. The calculation showed a good agreement with other numerical results. Then, the present code was applied to the defrosting problem of a real automobile, and a good agreement with the experimental data was also obtained.

• Structural Engineering and Mechanics
• /
• 제2권1호
• /
• pp.49-62
• /
• 1994

Based on the transfer matrix approach and integral transforms, a solution method is developed for the stress analysis of axisymmetrically loaded transversely isotropic elastic media with generalized interlayer and support conditions. Transfer functions (Green's functions in the transformed domain) are obtained in explicit integral form. For several problems of practical interest with different loading and support conditions, solutions are worked out in detail. For the inversion operation, an efficient technique is introduced to remedy the slow convergence of numerical integrals involving oscillating functions. Several illustrative examples are considered and numerical results are presented.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.535-542
• /
• 2011

To utilizing CFX V12.0.l, internal flow characteristics of denture high-speed air turbine hand-piece unit was identified, in order to analyze the performance of the torque values were compared. In order to find out the difference of torque by mash values, under steady condition, performed grid convergence test. It compared theoretical torque with torque through flow analysis. To describe the motion of turbine blade was used to immerged solid method. Depending on the location of the turbine blade were calculated from five case. Maximum and minimum values of turbine blades was analyzed. To analyze the performance of the torque values were compared with speed of turbine blade.