DOI QR코드

DOI QR Code

Strain penetration of high-strength steel bars anchored in reinforced concrete beam-column connections

  • Li, Ling (School of Civil Engineering, Harbin Institute of Technology) ;
  • Zheng, Wenzhong (School of Civil Engineering, Harbin Institute of Technology) ;
  • Wang, Ying (School of Civil Engineering, Harbin Institute of Technology)
  • 투고 : 2018.07.23
  • 심사 : 2019.08.27
  • 발행 : 2019.11.10

초록

This paper presents experimental and analytical investigations on additional fixed-end rotations resulting from the strain penetration of high-strength reinforcement in reinforced concrete (RC) beam-column connections under monotonic loading. The experimental part included the test of 18 interior beam-column connections with straight long steel bars and 24 exterior beam-column connections with hooked and headed steel bars. Rebar strains along the anchorage length were recorded at the yielding and ultimate states. Furthermore, a numerical program was developed to study the effect of strain penetration in beam-column connections. The numerical results showed good agreement with the test results. Finally, 87 simulated specimens were designed with various parameters based on the test specimens. The effect of concrete compressive strength ($f_c$), yield strength ($f_y$), diameter ($d_b$), and anchorage length ($l_{ah}$) of the reinforcement in the beam-column connection was examined through a parametric study. The results indicated that additional fixed-end rotations increased with a decrease in $f_c$ and an increase in $f_y$, $d_b$ and $l_{ah}$. Moreover, the growth rate of additional fixed-end rotations at the yielding state was faster than that at the ultimate state when high-strength steel bars were used.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China (NSFC)

참고문헌

  1. Alva, G.M.S. (2013), "Moment-rotation relationship of RC beam-column connections: Experimental tests and analytical model", Eng. Struct., 56(6), 1427-1438. https://doi.org/10.1016/j.engstruct.2013.07.016.
  2. CEB-FIP (2010), CEB-FIB Model Code International Federation for Structural Concrete (fib), Committee Eurointernational Du Beton, Thomas Telford Services Ltd., London, United Kingdom.
  3. EC8 (2005), Design provisions of structures for earthquake resistance -Part 3: Assessment and retrofitting of buildings, CEN, Brussels, Belgium.
  4. Fisher, Matthew J., and H. Sezen. (2011), "Behavior of exterior reinforced concrete beam-column joints including a new reinforcement", Struct. Eng. Mech., 40(6), 27-37. https://doi.org/10.12989/sem.2011.40.6.867.
  5. GB 50010-2010 (2010), Code for design of concrete structures, Architecture and Building Press; Beijing, China. (in Chinese).
  6. Giuseppe Campione, Francesco Cannella, Liborio Cavaleri and Alessia Monaco. (2018), "Simplified analytical model for flexural response of external R.C. frames with smooth rebars", Struct. Eng. Mech., 66(4), 531-542. https://doi.org/10.12989/sem.2018.66.4.531.
  7. Mergos, P.E. (2013), "The anchorage-slip effect on direct displacement-based design of R/C bridge piers for limiting material strains", Comput. Concrete, 11(6), 493-513. https://doi.org/10.12989/cac.2013.11.6.493.
  8. Mergos, P.E. and Kappos, A.J. (2012), "A gradual spread inelasticity model for R/C beam-columns accounting for flexure shear and anchorage slip", Eng. Struct., 44(6), 94-106. https://doi.org/10.1016/j.engstruct.2012.05.035.
  9. Mergos, P.E. and Kappos, A.J. (2016), "Estimating fixed-end rotations of reinforced concrete members at yielding and ultimate", Struct. Concrete, 16(4), 537-545. https://doi.org/10.1002/suco.201400067.
  10. Monti, G., Filippou, F.C. and Spacone, E. (1997), "Analysis of hysteretic behavior of anchored reinforcing bars", ACI Struct. J., 94(2), 248-261.
  11. Panagiotakos, T.B. and Fardis M.N. (2001), "Deformations of reinforced concrete members at yielding and ultimate", ACI Struct. J., 98, 135-148.
  12. Park, G.K., Kwak, H.G. and Filippou, F.C. (2017), "Blast Analysis of RC Beams Based on Moment-Curvature Relationship Considering Fixed-End Rotation", J. Struct. Eng., 143(9), https://doi.org/10.1061/(ASCE)ST.1943-541X.0001837.
  13. Paulay. T, and M.J.N. Priestley. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley and Sons, New York, NY, USA.
  14. Pimanmas, A., and Thai, D.X. (2011). "Response of lap splice of reinforcing bars confined by FRP wrapping: application to nonlinear analysis of RC column", Struct. Eng. Mech., 37(37), 111-129. https://doi.org/10.12989/sem.2011.37.1.095.
  15. Rajagopal, S., and S. Prabavathy. (2013), "Study of exterior beamcolumn joint with different joint core and anchorage details under reversal loading", Struct. Eng. Mech., 46(6), 809-825. https://doi.org/10.12989/sem.2013.46.6.809.
  16. Saatcioglu, M., Alsiwat, J.M. and Ozcebe, G. (1992), "Hysteretic Behavior of Anchorage Slip in R/C Members", J. Struct. Eng., 118(9), 2439-2458. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:9(2439).
  17. Sarti, F., Palermo, A. and Pampanin, S. (2016), "Experimental calibration of parallel-to-grain strain penetration length for internal epoxied bars", Construct. Build. Mater., 112, 970-979. https://doi.org/10.1016/j.conbuildmat.2016.03.009.
  18. Sezen, H. and Moehle, J. (2003), "Bond-slip behaviour of reinforced concrete members", fib Symposium Concrete Structures in Seismic Regions, Athens, Greece, May.
  19. Soroushian, P., Obaseki, K., Nagi, M. and Rojas, M. (1988), "Pullout behavior of hooked bars in exterior beam-column connections", ACI Struct. J., 85,269-276.
  20. Youlin, X., Wendu, S. and Hong, W. (1994), "An experimental study of bond-anchorage properties of bars in concrete", J. Build. Struct., 3, 26-37.

피인용 문헌

  1. Seismic Behavior of RC Beam Column Joints with 600 MPa High Strength Steel Bars vol.10, pp.13, 2019, https://doi.org/10.3390/app10134684