• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권2호
• /
• pp.134-142
• /
• 2010

A comparative study on the trade-off between the drive current and the total gate capacitance in double-gate (DG) and triple-gate (TG) FinFETs is performed by using 3-D device simulation. As the first result, we found that the optimum ratio of the hardmask oxide thickness ($T_{mask}$) to the sidewall oxide thickness ($T_{ox}$) is $T_{mask}/T_{ox}$=10/2 nm for the minimum logic delay ($\tau$) while $T_{mask}/T_{ox}$=5/1~2 nm for the maximum intrinsic gate capacitance coupling ratio (ICR) with the fixed channel length ($L_G$) and the fin width ($W_{fin}$) under the short channel effect criterion. It means that the TG FinFET is not under the optimal condition in terms of the circuit performance. Second, under optimized $T_{mask}/T_{ox}$, the propagation delay ($\tau$) decreases with the increasing fin height $H_{fin}$. It means that the FinFET-based logic circuit operation goes into the drive current-dominant regime rather than the input gate load capacitance-dominant regime as $H_{fin}$ increases. In the end, the sensitivity of $\Delta\tau/{\Delta}H_{fin}$ or ${{\Delta}I_{ON}}'/{\Delta}H_{fin}$ decreases as $L_G/W_{fin}$ is scaled-down. However, $W_{fin}$ should be carefully designed especially in circuits that are strongly influenced by the self-capacitance or a physical layout because the scaling of $W_{fin}$ is followed by the increase of the self-capacitance portion in the total load capacitance.

• 한국환경보건학회지
• /
• 제31권2호
• /
• pp.160-164
• /
• 2005

This study was performed to evaluate the effects of washing food wastes before aerobic composting on temperature, pH and salinity, and the effects of washing after composting on salinity of sample mixtures. Weight ratios of food wastes to water in washing were 1:0(Control), 1:1(W-1), 1:2(W-2), 1:3(W-3) and 1:0(N-4), respectively. Ratios of food wastes to wood chips in reactor of Control, W-1, W-2, W-3 and N-1 were $5\;kg:0\iota,\;5\;kg:5\iota,\;5\;kg:5\iota,\;5\;kg:5\iota\;and\;5\;kg:5\iota$, respectively. Reactors were operated for 24 days with 1 hour stirring by 1 rpm and 2 hours of forced aeration per day. The increase in the ratio of water to food wastes resulted in the increase of the maximum reaction temperature and the shortening of the high temperature reaction period. The increase in the ratio of water to food wastes also resulted in faster reaching to the lowest pH and then to the steady state of pH 9.0. The final salinities of Control, N-1, W-1, W-2 and W-3 were $1.04\%,\;0.92\%,\;0.78\%,\;0.64\%\;and\;0.53\%$, respectively. The salinities of the N-l samples which were washed by the weight ratios (water:N-l) of 1:1, 2:1 and 3:1 after composting were $0.72\%,\;0.61\%\;and\;0.51\%$, respectively. Therefore, washing food wastes before aerobic composting is more efficient method than that after aerobic composting.

• 공업화학
• /
• 제34권2호
• /
• pp.137-143
• /
• 2023

본 연구에서는 알팔파로부터 추출한 천연계면활성제를 사용하여 중심합성설계모델(CCD-RSM)을 이용한 O/W 유화제조 공정의 최적화를 수행하였다. 그 결과 95% 신뢰구간에서 최적화 결과의 통계학적 합리성을 확인하였다. CCD-RSM을 통하여 독립변수인 알팔파 추출물:Sugar ester S-370의 혼합비율(P), 계면활성제의 첨가량(W) 및 유화속도(R)가 반응치인 유화안정도지수(ESI), 평균입자크기(MDS) 및 점도(V)에 끼치는 영향을 조사하여 O/W 유화제조공정의 최적조건을 산출하였다. 유화안정도지수, 평균입자크기 및 점도에 관한 회귀방정식으로부터 다중반응을 수행하여 3가지 반응치를 동시에 만족하는 최적 유화조건으로 알팔파 추출물:Sugar ester S-370의 혼합비율은 49.5 wt%, 계면활성제의 첨가량 9.1 wt%, 유화속도 6559.5 rpm으로 나타났으며 산출된 반응치의 응답값은 ESI는 89.9%, MDS는 1058.4 nm, V는 1522.5 cP로 산출되었다. 이를 실험으로 확인한 결과 ESI는 88.7%, MDS는 1026.4 nm, V는 1486.5 cP이었으며 평균 오차율은 2.3 (± 0.4)%이었다. 따라서 CCD-RSM을 실제 유화 제조에 적용하여 만족스러운 O/W 유화제조 공정조건을 얻을 수 있었다.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2001년도 제18차 정기총회 및 학술발표 PROCEEDINGS
• /
• pp.61-63
• /
• 2001

Two experiments were conducted to investigate the feeding influence of wood vinegar and mixed with probiotics on performance and physiological related of broiler chicks for five weeks. Diets contained 21.5%, 3,100kcal/kg and 19.0% CP, 3,100kcal/kg ME for starting and finishing period, respectively. In Expt 1, Four levels of wood vinegar(0, 0.05, 0.10, 0.20%) were fed into two hundred forty chicks with four replicates. In Expt 2, 0, 0.1% wood vinegar(W), 0, 0.1% lactobacillus casei(L) and bacillus subtilis (B) were applied to 2${\times}$2${\times}$2 facotrial design for eight treatments with four replicates. Weight gain, feed intake, feed cholesterol were detected at five weeks old in each experiment. In Expt 1, Weight gain of chicks fed 0.1% wood vinegar(WV) was increased upto 1645.8g, but was not significantly different. However, chicks fed 0.2% WV showed the highest gain and siginificantly different compared to that of control (P＜0.05) for finishing period. Feed intake also showed similar tendency with weight gain. There were no statistical difference in feed conversion. Abdominal fat seemed to be decreased in WV supplemental groups, whereas ND antibody titer tended to increase in those treatments. In Expt 2, 0, 0.1% WV, lactobacillus, bacillus were combined with each other(W$\sub$0/L$\sub$0/B$\sub$0/, W$\sub$0/L$\sub$1/B$\sub$0/, W$\sub$0/L$\sub$0/B$\sub$1/, W$\sub$0/L$\sub$1/B$\sub$1/, W$\sub$1/L$\sub$0/B$\sub$0/, W$\sub$1/L$\sub$1/B$\sub$0/, W$\sub$1/L$\sub$1/ B$\sub$0/, W$\sub$1/L$\sub$0/B$\sub$1/, W$\sub$1/L$\sub$1/B$\sub$1). WV supplemental groups significantly improved feed conversion of all treatments(P＜0.05). There were no interaction in weight gain and feed intake. Total cholesterol was signficantly decreased in WV plus lactobacillus and ladtobacillus plus bacillus treatments. Liver to body ratio(%) of lactobacillus plus WV significantly decreased compared to that of other treatments. The results of these experiments showed that wood vinegar tended to improve the performance of broiler chicks, but was not effect in its combination with lactobacillus or bacillus treatments.

• 한국식품영양과학회지
• /
• 제22권1호
• /
• pp.73-77
• /
• 1993

This study was intended to investigate the effects of solvents, particle size of a sample, sample to solvent ratio, temperature and time on the extraction of garlic oleoresin. Among eleven solvents used for oleoresin extraction from garlic, the optimal solvent was methyl alcohol. The most appropriate particle size of garlic, extracting temperature and mixing ratio of garlic to methyl alcohol were 20mesh, $25^{\circ}C$ and 1 to 3(w/w), respectively. On the basis of yield in oleoresin extraction, optimum extracting time was about 4 hours. The yield of oleoresin under the above-mentioned conditions was 21.3%. "L" and "b" as color appearance were decreased, whereas "a"was increased slightly during 60 days storage at 5$^{\circ}C$, $25^{\circ}C$ and 4$0^{\circ}C$. Changes in the pyruvate content showed close relation to pH value. During storage pyruvate content of garlic oleoresin was decreased as increasing storage temperature.

• 생명과학회지
• /
• 제9권5호
• /
• pp.581-589
• /
• 1999

This study was carried out to compare ozonation with photocatalysis degradation for removal Geosmin of algae byproduct. The change of pH was decresed from 7.02 to 2.8 after contact time 480 minute for ozonation. In case of UV-germicidal lamp, pH was very quickly increased from 7.02 to 7.5, but Halogen lamp did very slowly change pH. Geosmin degradation ratio was as following, UV-germicidal lamp/TiO2(100mg/L) O3>UV-germicidal lamp/TiO2(50mg/L)>UV-germicidal lamp(10W)>halogen lamp(50W). Instead of TiO2 suspension solution, Geosmin degradation ratio was very low using hollow bead and pellet as coated TiO2. As a result of identifing byproducts, ozonation generated three species of aldehyde such as 3-Heptanone and three species of alcohol such as Heptanal, but photocatalysis formed 1, 14-Tetradecanediol infinitesimally.

• 상하수도학회지
• /
• 제25권4호
• /
• pp.591-596
• /
• 2011

Surface floating air cathode microbial fuel cell (MFC) having horizontal flow was developed for the application of MFC technology. RVC (Reticulated vitreous carbon) coated with anyline was used as anode electrode and carbon cloth coated with Pt (5.0 g Pt/$m^2$, GDE LT250EW, E-TEK) was used as cathode electrode. As results of continuous operation with changing the flow rate from 4.3 mL/min to 9.5 mL/min, maximum power density of 4.5 W/$m^3$ was acquired at 5.4 mL/min, which was at 0.35 m/hr of flow velocity under anode electrode. When the ratio of cathode surface area to anode surface area($A_c/A_a$) was changed to 1.0, 0.5, and 0.25, the maximum power density of 2.7 W/$m^3$ was shown at the ratio of 1.0. As the ratio decreased from 1.0 to 0.25, the power density also decreased, which is caused by increasing the internal resistance resulted from reducing the surface area to contact with oxygen. Actually, internal resistances of the ratio of 1.0, 0.5, and 0.25 were 63.75${\Omega}$, 142.18${\Omega}$, and 206.12${\Omega}$, respectively.

• 한국수산과학회지
• /
• 제30권4호
• /
• pp.543-549
• /
• 1997

본 연구에서는 그물어구의 모형수칙에 관한 기존의 연구 결과들을 종합하고, 지금까지 가장 많이 이용되어 온 Tauti의 수칙을 중심으로 하여 이들 수칙이 지니는 간제점에 대해 주로 검토하였다 그 결과, 지금까지의 수칙들은 그물의 유수저항을 정확하게 해석하지 못하였고 그것의 수중 형상을 결정하는 중요 인자로써 그물감의 수중 무게를 택한 것에 문제가 있다는 것을 알 수 있었다. 따라서, 이러한 견해 대신에 그물을 그것의 영역권 내로 물을 유입한 후 영역권 밖으로 투과시키는 하나의 유공성 구조물로 간주하고, 그것에 대한 물의 유입${\cdot}$유출 특성을 이용하여 유수저항을 해석한 전보의 결과를 기초로 하여 실물과 모형과의 상사 관계를 새로히 구하였다. 즉, 그물의 각 변의 길이를 L, 그물실의 지름을 d, 그물코의 크기 및 전개각을 각각 2l 및 2$\varphi$, 뼈대줄의 지름과 길이 및 비중을 각각 $d_r,\;l_r$ 및 $\rho_r$, 뜸, 발돌 등의 부속구 하나의 수중 무게 및 갯수를 각각 $w_a$ 및 Na, 물의 비중을 $\rho_w$, 유속을 $\nu$, 그물의 유수저항을 R이라 할 때, 실물 (첨자 1)과 모형 (첨자 2)이 상사를 이루기 위해서는 $$\frac{d_2}{d_1}=\sqrt{\frac{l_2}{l_1}},\;\frac{N_2}{N_1}=(\frac{d_1}{d_2})^{1.5}\frac{L_2}{L_1},$$ $$\;\varphi_1=\varphi_2,\;\frac{d_{r2}}{d_{r1}}=\sqrt{\frac{L_2{(\rho_{r1}-\rho_{w1})}}{{L_1{(\rho_{r2}-\rho_{w2})}}$$ $$\frac{N_{a2}}{N_{a1}}=\frac{W_{a1}}{W_{a2}}(\frac{L_2}{L_1})^2$$, $$\nu_1=\nu_2$$ 및 $$\frac{R_2}{R_1}=(\frac{L_2}{L_1})^2$$ 을 만족해야 하고, 조작 유속이 매우 작은 값으로 한정되는 그물에 있어서 구성 재료의 변화에 따른 수중 형상의 변화를 조사할 때와 같이 그물감의 수중 무게의 영향 자체를 조사 대상으로 하는 경우에는 위의 조건들 외에 $$\frac{\rho_2-\rho_{w2}}{\rho_1-\rho_{w1}}=\frac{d_1}{d_2}$$를 추가로 만족해야 한다는 젓을 알 수 있었다.

• KSBB Journal
• /
• 제13권6호
• /
• pp.706-717
• /
• 1998

과당계열 배당체인 메틸프룩토시드를 반응출발문질로하여 과당계열 당 지방산 에스테르인 메틸프룩토시드 올레산 모노 및 디에스테르를 효소적 용매 및 무용매공정에 의하여 합성하였다. 용매공정으로부터 머틸프룩토시드 올레산 모노에스테르를 합성한 결과, 최적 상용용매로는 2-메틸-2-프로관올이 우수하게 나타났으며 매틸프룩토시드의 용해도는 $60^{\circ}C$애서 400g/L이상에 상당하였다. 최적반응조건을 검토한 결과, 에틸프룩토시드 올레산의 최적올비 3.1, 에틸프룩토시드의 최적 초기농도 200g/L, Novozym 435의 최적 촉매함량 1%(w!v), 반응온도 $60^{\circ}C$에서 반응시간 8시간만에 70%의 평 형 젠화율애 도달하였으며 12.6g/L-hr의 생산성으로 매렐프룩토시드 올레산 모노에스테프 블 생싼할 수 았었다. 그리고, 무용매공정에서 메틸프룩토시드 올레산 디에스터르를 합생한 결과, 메틸프룩토시드와 올레산의 최적돌에 l.2, Novozym 435의 최적 촉매함령, 10%(w/w), 반응온도 $70^{\circ}C$, 진공도 20 - 200mmHg 에서 반응시간 10시간만에 95%이상의 전화율로 140g;L-hr의 생산성으로 메틸프룩토시드 올레산 디에스테르를 생산할 수 있었다.

• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.329-335
• /
• 2001

최근 고유동콘크리트에 관한 연구가 활발히 이루어지고 있으며, 건설현장에서의 시공사례도 발표되고 있다. 고유동콘크리트의 유동특성으로는 유동성, 충전성, 간극통과성, 재료분리저항성 등이 있으며, 이러한 고유동콘크리트의 유동특성은 물결합재비 단위수량 결합재량 등 여러 가지 요인에 의해 영향을 받는다. 본 연구는 고유동콘크리트의 특성에 미치는 물결합재비와 단위수량의 영향을 비교.분석하고자 하였다. 이를 위해 물결합재비(W/B : 0.30 0.35, 0.40, 0.45) 및 단위수량(W : 155, 165, 175, 185 kg/㎥)에 따른 고유동콘크리트의 배합을 선정하여, 굳지않은 콘크리트에서 슬럼프-플로우, V형깔때기, L형통과시험 등과 경화콘크리트에서 압축강도 및 동결융해시험 등을 실시하였다. 실험결과 본 논문대상의 경우 모든 물결합재비의 단위수량 175kg/㎥에서 일본 건축학회에서 제안하고 있는 슬럼프-플로우 50cm 통과시간 제안치인 3~8초를 만족시키는 적정한 점성을 나타냈으며, 물결합재비 0.35에서 가장 양호한 재료분리저항성을 나타내었다. 또한, 모든 배합에서 28일 양생후 340~710 kgf/㎤ 수준의 높은 압축강도를 발현하였으며, 공기연행제를 첨가한 고유동콘크리트에서 양호한 내동결융해성을 보여주었다.