• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.489-494
• /
• 2017

Human anatomy courses are one of the most fundamental subjects taught to students in any health-related science field. To improve the quality and to enlarge the scope of human anatomy courses, 130 students (Biomedical Laboratory Science, Physical Therapy, and Occupational Therapy) were given a questionnaire survey. The students were asked question regarding their anatomy course and cadaver dissection class. Specific questions regarding knowledge acquisition before and after the course was queried, in addition to their views on the necessity of cadaver dissection. The survey results indicated that students of all three departments were satisfied with the anatomy course, with no statistical difference in the students' sex or department affiliation. Although there was no difference between the three majors with respect to understanding the course materials, Biomedical Laboratory Science students showed higher satisfaction in this course (p<0.05). Most students, regardless of sex and high school education, stated that cadaver dissection is an important part of the anatomy course. In conclusion, anatomy courses should implement cadaver dissection and actual practice rather than textbook-related studies alone.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.17-26
• /
• 2010

This is concerned with the technology to monitor the vehicle operation, failure and disorder by using WiBro portable device. More precisely, the technology makes it possible that the information collection device is connected to both ECU(Electronic Control Unit) which is the device for controlling engine, transmission, brake, air-bag, etc that are connected to in-vehicle network and OBD-II connector that is for data collection from various sensors. In addition, with a WiBro portable device (cell phone, PDA, PMP, UMPC, etc). equipped with a vehicle diagnostic programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and alarm is alerted when the vehicle is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiBro network to the server managed by the company specialized in managing the vehicles, thus the technology could help the drivers who have less knowledge about their auto-vehicles have safe and economic driving. There is always a possibility of malfunction due to various types of noise that are caused by wring-harness when the device is wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from vehicle and a personal WiBro device. Also, we performed research on data acquisition and interlock for the system defined by the definition for information and data sharing platform.

• CRM연구
• /
• v.4 no.2
• /
• pp.1-17
• /
• 2011

In the study of transaction coupling and consumer behavior it is argued that the satisfaction after consumption and consumer self-confidence would affect the degree of transaction coupling. Based on Kivetz(1999), this study expand transaction coupling which is a mental accounting process. Satisfaction after consumption and consumer self-confidence have been frequently cited as a key construct for predicting various consumer-related behaviors. The purpose of this research is to examine the effect of satisfaction after consumption and consumer self-confidence for hedonic products on transaction coupling. In order to explain the impact of consumer self-confidence clearly, the authors used a five-factor(i.e., information acquisition, consideration-set formation, personal and social outcomes, persuasion knowledge and marketplace interfaces). Using the scenario about baseball game, the authors manipulated the consumer satisfaction after consumption (satisfaction vs. dissatisfaction) between-subjects design. And consumer self-confidence was measured based on Bearden et al.(2001). The results of experimental study showed that the main effects of satisfaction after consumption is significant. The larger consumer satisfaction after consumption reflected a higher degree of transaction coupling. The 2-way interaction between satisfaction after consumption and consumer self-confidence is also significant. Specifically, the transaction coupling differentiation from satisfaction after consumption tends to be larger at high consumer-self confidence than at low one.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.174-179
• /
• 2015

Failure Mode and Effects Analysis (FMEA) has been used by Dynamic Positioning (DP) system for risk and reliability analysis. However, there are limitations associated with its implementation in offshore project. 1) since the failure data measured from the SCADA system is missing or unreliable, assessments of Severity, Occurrence, Detection are based on expert's knowledge; 2) it is not easy for experts to precisely evaluate the three risk factors. The risk factors are often expressed in a linguistic way. 3) the relative importance among three risk factors are rarely even considered. To solve these problems and improve the effectiveness of the traditional FMEA, we suggest a Fuzzy-FMEA method for risk and failure mode analysis in Dynamic Positioning System of offshore. The information gathered from DP FMEA report and DP FMEA Proving Trials is expressed using fuzzy linguistic terms. The proposed method is applied to an offshore Dynamic Positioning system, and the results are compared with traditional FMEA.

• 대한공업교육학회지
• /
• v.45 no.1
• /
• pp.1-19
• /
• 2020

The purpose of this research was to draw implications for preparing utilizing and management course assessment type of national technical qualification based on the awareness of teachers in industrial secondary vocational high schools. To achieve it, this researcher analyzed the awareness about management course assessment type of national technical qualification of teachers at industrial secondary vocational high schools and analyze possibility to introduce course assessment qualification, degree of agreement for expected effects, and importance and necessity for the matters to be considered when introducing management course assessment qualification. Concrete results of this research are as follows. First, the degree of understanding management course assessment type of national technical qualification at industrial secondary vocational high schools was common, but the degree of agreement for introducing goal, purpose, and necessities was low. Second, for the expected effects to be obtained when acquiring course assessment qualifications, there were acquisition of qualification at the same time of education, suggestion of studying goal from an angle of concrete and significant performance, systematic education based on NCS, possibility to develop and form training career, and possibility to acquire industrial field-centered knowledge and technology in order. Third, to draw priority of each item to be considered when introducing course assessment type of national technical qualification at industrial secondary vocational high schools, the importance and necessities were analyzed. As a result, for the sectors whose requirements are more than average, there were flexibility of course assessment type qualification classes, preparation of proper measure by NCS revision, relief of edited classes of necessity ability unit, etc.

• The KIPS Transactions:PartB
• /
• v.15B no.1
• /
• pp.45-52
• /
• 2008

As the recent development of the IT services, there is a urgent need of effective diagnosis system to present appropriate solution for the complicated problems of breakdown control, a cause analysis of breakdown and others. So we propose an intelligent diagnosis system that integrates the case-based reasoning and the artificial neural network to improve the system performance and to achieve optimal diagnosis. The case-based reasoning is a reasoning method that resolves the problems presented in current time through the past cases (experience). And it enables to make efficient reasoning by means of less complicated knowledge acquisition process, especially in the domain where it is difficult to extract formal rules. However, reasoning by using the case-based reasoning alone in diagnosis problem domain causes a problem of suggesting multiple causes on a given symptom. Since the suggested multiple causes of given symptom has the same weight, the unnecessary causes are also examined as well. In order to resolve such problems, the back-propagation learning algorithm of the artificial neural network is used to train the pairs of the causes and associated symptoms and find out the cause with the highest weight for occurrence to make more clarified and reliable diagnosis.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.216-224
• /
• 2009

The purpose of this study was to examine the periodontal disease awareness and periodontal health status of industrial workers in an attempt to help facilitate their prevention and treatment of periodontal diseases. The findings of the study were as follows: 1. In regard to a knowledge acquisition route on periodontal diseases, the largest number of the industrial workers investigated(36.3%) learned about the diseases from dental hospitals. As to scaling cycle, the younger workers deemed it necessary to get their teeth scaled every six months. In contrary, the older workers considered it advisable to do that about once a year. Age made a statistically significant difference to that (p<.05). 2. As for the state of the periodontal diseases of the workers, the greatest group (26.5%) found themselves to have something between their teeth often. The second most prevalent peridontal disease was gingival bleeding(24.5%), and the third largest group(24.5%) had teeth that were sensitive to cold. The fourth greatest group(15.9%) had the swollen gums from time to time, and the fifth largest group(4.5%) had shaken teeth. 3. Concerning the cause of periodontal diseases, the largest group (48.8%) cited an incorrect toothbrushing. As to the prevention of periodontal diseases, the greatest group(66.8%) viewed the right toothbrushing as the best way for that as well.

• Journal of Korean Philosophical Society
• /
• v.126
• /
• pp.79-108
• /
• 2013

Is the development of linguistic competence due to the learning process or the maturational process? According to Piaget, its development is a genuine learning process involving authentic constructions with gradual disclosure of new possibilities. But According to Chomsky, the acquisition of linguistic competence is due to a genetically conditioned maturational process. So it merely involves the actualization of a set of possibilities existing from the beginning Consequently, Piaget supposes that interaction with the environment plays a shaping role, while Chomsky allows it to have a mere triggering role. In broad respective, Chomsky supposes the rationalism that knowledge is largely inborn, while Piaget in the constructivist position which strives to find a middle course between radical rationalism and radical empiricism. In the one hand, an ultra-rationalistic concept such as 'fixed nucleus' supposed by Chomsky is, in my eye, nor plausible. In the other hand, if Piagetian constructivism is to be sustained, it must be sustained independently of its dubious biological fundament, and merely as a developmental psychological theory. In one word, we need to synthesize Piagetian cognitive approach and Chomskian syntactical, in order to explain exactly the source of human linguistic competence.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.75-87
• /
• 2021

The purpose of this study is to derive the characteristics of interaction design for each stage of content composition so that it can be referred to in the planning and production of virtual reality safety education contents. It was confirmed that each of the following interaction design features was found in the three configuration steps: acquisition of situation response procedure knowledge, accident situation experiential learning, and content confirmation and evaluation. First, it was revealed that the quality of experience was controlled by increasing the fidelity of behaviors and reducing general and repetitive behaviors in order to emphasize the educational content-related experiences in the learner experience stage. Second, in order for learners to easily recognize main interaction objects in order to acquire information on safe behavior procedures in unfamiliar environments, use of spatial UI or signifiers using arrows or symbols, posts that specifically instruct actions, and multisensory signals Therefore, it was found to be important to emphasize essential actions in a way that lowers the degree of freedom of user experience, and the proportion of non-realistic interactions for cognitive interactions was found to increase. Lastly, in the confirmation and evaluation stage of the experience, it is important to use the meta UI to alleviate negative experiences such as physical damage after experiencing a safety accident situation,

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.121-139
• /
• 2021

Technical documents in the construction field are changing from paper documents to electronic ones. As a result, the industry witnesses a trend of using portable electronic devices in searching or retrieving necessary information such as relevant regulations. Despite the improvement in the accessibility to general technical documents, a limitation is still found in accessing the electronic documents on the regulations. We see the barrier for field engineers to enhance their technical knowledge. One of major barriers is that videos, animations, and virtual reality information to enhance the visual understanding of technical content related to regulations are not linked. It is the interactive electronic technical manual (IETM) that can address such issues. The IETM is an electronic document system that enables real-time information acquisition while operating in the form of conversations with users by linking multimedia functions to document types such as specifications and guidelines. This study establishes a model of the IETM that can be operated in the planning stage of a construction project. The study also verifies its usability with a hypothetical case study. This study aims to improve the usability of the IETM in the construction project by analyzing the application effect of the IETM using the AHP technique.