• 한국산림과학회지
• /
• 제97권5호
• /
• pp.485-491
• /
• 2008

This study was performed in 14 unthinned Mongolian pine (Pinus sylvestris L. var. mongolica Litvin) plantations in northeast China. Data were collected on 70 sample trees of different canopy position with diameter at breast height (DBH) ranging from 6.9 cm to 34.5 cm. Diameter and length of knots per whorl below the living crown were studied by different vertical levels divided by relative knot height (RHK) in this paper. Models taking DBH and height to the crown base (HCB) as independent variables were developed to predict knot diameter (KD) in a sample whorl. According to the vertical distribution tendency and range of sound knot length (KLsound), KLsound was modeled as multiple linear function of DBH, KD and relative knot height (RHK). The loose knot length (KLloose) was described as a function of DBH, KD and height above the ground for knots (HK) in a mixed log-linear model. Results from this study can provide abundant knot information so as to describe the knot size and vertical distribution tendency of Mongolian pine plantation.

• 한국산림과학회지
• /
• 제94권5호통권162호
• /
• pp.313-320
• /
• 2005

This study was performed in a 38-year-old Mongolian pine (Pinus sylvestris L. var. mongolica Litvin) plantation in northeast China. Data were collected from 5 sample trees with different canopy position ranging in DBH from 14.6 cm to 23.8 cm. Sawn speciments that included the biggest knot were taken from the stem below the living crown. Number and distribution of knots per whorl below the living crown were studied by relative height below living crown (RHBC). A linear model expressed as function of whorl age (AGE), whorl height ($H_k$) and the stem diameter at which the whorl was located ($D_k$) was developed to predict the knot diameter and angle. The number of annual rings in four periods and the width of respective zone alone stem were used as dependant variables to analyze the knot develop phases. In average, the number of years from branch birth to ceased forming rings was 7.8, the branches remained alive for 4.2 years without forming annual rings, and branches were occluded 14.4 years after their death. These results can provide abundance branch and knot information so as to describe current and past tree growth dynamic of Mongolian pine plantation.

• Journal of the Korean Wood Science and Technology
• /
• 제38권3호
• /
• pp.170-177
• /
• 2010

구조용 목재부재의 성능 예측에 가장 큰 영향을 끼치는 옹이를 활용하여 유한요소 수치해석을 실시하였다. 다른 구조용 재료와 달리 목재의 경우 직교이방성을 나타내기 때문에 이를 적용하였고 옹이를 실린더 형태, 원추형 형태, 육면체 형태로 모델화 하였다. 목재 부재에 대해 실제 압축강도실험을 실시하여 그 파괴형태를 파악하고 최대강도값을 계산하였으며, 각 부재의 치수와 옹이의 크기, 위치, 개수를 반영한 수치해석 모델을 제작하여 유한요소해석을 실시하였다. 실험에서 얻어진 최대압축강도를 적용한 수치해석을 실시하여 옹이자료에 따른 각 부재의 응력분포형태를 파악하고 이를 실제 부재의 파괴형태와 비교 분석하였다. 수치해석에 소요되는 시간이나 요수 분할의 어려움, 옹이 주위의 응력 전달의 유사성 등에 기준했을 때 실린더 형태의 요소가 가장 타당하다고 판단되었다. 또한 응력 분포 모양과 변형 분포 모양을 비교한 경우 유한 요소 수치해석의 결과에서 응력이 가장 집중되는 부분과 변형이 가장 심하게 발생한 주위에서 실제 시편의 파괴나 균열이 발생함을 알 수 있었다. 이를 기초로 유한요소 수치해석법을 직교이방성과 옹이 모델링을 적절히 적용할 경우 휨응력을 받는 부재와 인장 응력을 받는 부재 등의 성능 해석에 유용한 수단으로 활용될 수 있을 것으로 판단된다.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.255-258
• /
• 2011

When kiwifruit root system infected with nematodes was treated by hot water dipping treatment, the maximum temperature for this treatment was suggested as $50^{\circ}C$. The lowest killing temperature of internal root-knot in the root tissue was $48^{\circ}C$. Consequently, root-knot nematodes could be killed without damaging root tissues by the hot water dipping treatment at $48^{\circ}C$ for 10 minutes. This could be useful for organic production and distribution of kiwifruit seedlings by avoiding the synthetic nematicides which are not easily decomposed in soil once applied.

• 식물병연구
• /
• 제29권1호
• /
• pp.45-51
• /
• 2023

국내 참다래 주산지인 전라남도, 경상남도, 제주도 지역의 참다래 재배지 총 102개 지점을 대상으로 식물기생선충 종류와 밀도를 조사하였다. 검출된 식물기생선충은 뿌리혹선충(Meloidogyne spp.), 나선선충(Helicotylenchus spp.), 침선충(Paratylenchus spp.) 등 9개의 속이었으며, 102개 재배지 중 56%의 재배지가 뿌리혹선충에 감염되어 있는 것으로 나타나 국내 참다래 재배지에서 가장 중요한 식물기생선충은 뿌리혹선충이었다. 뿌리혹선충의 평균 밀도는 97마리/300 cm³ 토양으로 참다래의 수량 감소 피해가 우려된다. 뿌리혹선충의 종을 동정한 결과, M. arenaria, M. hapla, M. incognita, M. javanica 4종이 확인되었으며, 그 중 M. arenaria가 가장 우점하고 있다. 그 중 M. arenaria가 가장 우점하고 있다. 과수류에서의 식물기생선충 감염 경로는 감염된 묘목의 이식을 통한 확산이 많음으로 참다래 묘목 생산 및 보급단계에서 뿌리혹선충 무균묘 생산에 주의를 기울여야 할 것이다.

• 한국지구과학회지
• /
• 제27권5호
• /
• pp.569-578
• /
• 2006

CFHT 천문대 3.6 m 망원경에 부착된 OASIS 분광기를 사용하여 얻은 자료로부터 continuum, $H{\alpha},\;H{\beta}$, [O III], [N II] 등의 영상을 만들어 활동 은하핵 NGC 5728의 물리적 특성을 분석하였다. NGC 5728의 중심부에 NLR 영역으로 판단되는 약 $15"{\times}12"$ 범위 영역에 3개의 밝은 부분(NW knot, SE knot, nucleus)이 존재하고 있고, 이는 핵(nucleus)을 중심으로 북서방향이나 서쪽으로 물질의 흐름이 일어나고 있음을 암시한다. 우리는 직경 10"인 ring과 이의중심에 있는 NW knot의 구조가 은하중심과 일치하지 않음을 발견하였다. 우리는 이러한 구조의 생성 원인에 대해 알아보기 위하여 핵과 knot의 운동학적 특성을 비교하여 보았고, 방출선 영상에서 보이는 차이점을 비교함으로써 활동 은하 중심부의 구조를 살펴보았다.

• The Plant Pathology Journal
• /
• 제34권4호
• /
• pp.308-315
• /
• 2018

Root-knot nematodes 'Meloidogyne spp' are the most destructive group of plant parasitic nematodes causeing serious losses in vegetables crops and this damages worsened when crops grown under greenhouses conditions. In this sutdy, the distribution and characterization of root-knot nematode species collected from the Souss region of Morocco where vegetables crops intensively cultivated were determined by using both morphological and molecular tools. Out of the 110 samples collected from different greenhouses 91 (81.7%) were found to be infested with root-knot nematodes. Thirty-seven populations of root-knot nematodes were morphologically identified based on perineal patterns as well as molecularlly using species-specific primers. The obtained results indicated that Meloidogyne javanica and M. incognita were identified in 86.4% and 13.5% of the total populations, respectively. The lowest incidence of root-knot nematodes (64%) was found in Toussous, whereas the highest frequencies of 100% and 90% were detected in Taddart and Biogra, respectively. As the majority of the samples have been infested with Meloidogyne species; this indicates that there is an urgent need to provide farmers with a proper control strategy.

• Communications for Statistical Applications and Methods
• /
• 제29권3호
• /
• pp.287-299
• /
• 2022

In radiation epidemiology, the excess relative risk (ERR) model is used to determine the dose-response relationship. In general, the dose-response relationship for the ERR model is assumed to be linear, linear-quadratic, linear-threshold, quadratic, and so on. However, since none of these functions dominate other functions for expressing the dose-response relationship, a Bayesian semiparametric method using splines has recently been proposed. Thus, we improve the Bayesian semiparametric method for the selection of the tuning parameters for splines as the number and location of knots using a Bayesian knot selection method. Equally spaced knots cannot capture the characteristic of radiation exposed dose distribution which is highly skewed in general. Therefore, we propose a nonparametric Bayesian knot selection method based on a Dirichlet process mixture model. Inference of the spline coefficients after obtaining the number and location of knots is performed in the Bayesian framework. We apply this approach to the life span study cohort data from the radiation effects research foundation in Japan, and the results illustrate that the proposed method provides competitive curve estimates for the dose-response curve and relatively stable credible intervals for the curve.

• 대한수학회보
• /
• 제58권5호
• /
• pp.1097-1107
• /
• 2021

In this paper, we focus on the Hopf invariant and give an alternative proof for the unboundedness of stabilization heights of fiber surfaces, which was firstly proved by Baader and Misev.

• Journal of Computational Design and Engineering
• /
• 제2권1호
• /
• pp.1-15
• /
• 2015

Measured bidirectional reflectance distribution function (BRDF) data have been used to represent complex interaction between lights and surface materials for photorealistic rendering. However, their massive size makes it hard to adopt them in practical rendering applications. In this paper, we propose an adaptive method for B-spline volume representation of measured BRDF data. It basically performs approximate B-spline volume lofting, which decomposes the problem into three sub-problems of multiple B-spline curve fitting along u-, v-, and w-parametric directions. Especially, it makes the efficient use of knots in the multiple B-spline curve fitting and thereby accomplishes adaptive knot placement along each parametric direction of a resulting B-spline volume. The proposed method is quite useful to realize efficient data reduction while smoothing out the noises and keeping the overall features of BRDF data well. By applying the B-spline volume models of real materials for rendering, we show that the B-spline volume models are effective in preserving the features of material appearance and are suitable for representing BRDF data.