• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.113-114
• /
• 2015

This paper is to investigate the effect of poor quality aggregate source used in Korea on the mixture proportion and strength development of the high strength concrete fixed at 450 kg/m3 of cement contents. For aggregate kinds, good quality crushed stone from KS certified manufacturer and low quality crushed stone from non certified construction field are used. For fine aggregates, river sand, land sand, sea sand and mixed sand are also used. It is found that the use of low quality aggregates resulted in an increase of water demand considerably due to poor gradation of aggregate and excessive fine particles. Test results indicate that the use of low quality aggregate also decreases the compressive strength compared with that of good quality aggregate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.85-88
• /
• 2006

This study investigated influence of fine aggregate types on fundamental properties of cement mortar. Test showed that concrete using lime stone crushed fine aggregate(L) exhibited the most favorable fluidity due to grain shape and particle distribution, and next was blending aggregate miting L and G, blending aggregate mixing L and N, granite crushed fine aggregate(G), natural fine aggregate(N) in an order. Concrete using N had the highest air content and L was the smallest value because of the effective filling performance by continuos particle distribution. Compressive, tensile and flexural strength of all concrete using L had the highest value due to the smallest value of air content. It is also found that concrete using L resulted in decrease of drying shrinkage length change ratio.

• 한국건축시공학회지
• /
• 제15권6호
• /
• pp.561-567
• /
• 2015

본 연구는 순환골재의 품질을 개선시키기 위해 pH 10.2의 알칼리성을 띄고 있는 입경 5nm~60nm 정도의 40% 콜로이달 실리카 수용액을 사용하고, 4가지 표면처리방법을 적용하여 순환골재의 품질 향상 시험을 하였다. 순환골재의 품질시험은 비중, 흡수율, 기공률, 계면특성, 그리고 압축 및 인장시험을 하였다. 100kpa의 일정 압력하에서 콜로이달 실리카 수용액이 표면에 도포되고 $60^{\circ}C$에서 건조됨으로써 콜로이달 실리카 용액이 순환골재의 시멘트 모르타르의 표면을 일정한 두께로 효과적으로 코팅되었다. 4가지 표면처리 방법 중 Method C에 의한 표면처리방법이 순환골재의 품질을 효과적으로 개선시켰으며, 그로인해 순환골재콘크리트의 압축강도 및 인장강도 향상에 영향을 미친 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.373-376
• /
• 2008

The objective of this study is to investigate the properties of fresh concrete with recycled fine aggregates. Three different kinds of fine aggregate with natural, high and low quality recycled aggregates were prepared. The concrete mixtures were produced with test parameters of replacement ratio of recycled fine aggregate. The properties of the fresh concrete were measured by means of slump and air content according to elapsed time. Quality control method to maintain the constant total mixing water for recycled aggregate concrete was suggested. The all concrete mixtures were produced with approximately the same slump on the job site after an hour. Test results indicated that compressive strength of the concrete mixtures with constant slump is not affected by the replacement ratio of recycled fine aggregate. Therefore, the practical way for the quality control of recycled aggregate concrete is to maintain the constant total mixing water.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.285-288
• /
• 2005

This paper is an experimental study on applicability of repairing mortar using multi-functional slag aggregate. In this study, automatic construction machinery system were adapted, and their performance were evaluated by the using of those systems. In order to verify the effect of multi-functional aggregate, two kinds of aggregate were used and compared of their physical properties. The results indicate that multi-functional aggregate appears good physical properties such as durability, permeability coefficient.

• 자원리싸이클링
• /
• 제10권1호
• /
• pp.16-24
• /
• 2001

본 연구는 재생골재를 콘크리트의 구조체로 이용하기 위한 기본적인 공학적 특성을 고찰하는데 목적이 있다. 구조체의 일부로 사용할 경우 내구성과 인성, 특히 강도에 문제가 발생하므로 혼합 물질간의 최적배합비를 산출할 필요성이 있고, 원콘크리트의 물성과 생산방법에 따라 공학적 특성이 다르므로 원콘크리트에 대한 데이터베이스와 생산방법의 차이에 따른 재생골재의 역학특성을 제고할 필요가 있다. 따라서, 본 연구는 콘크리트 구조체의 한 구성원으로 사용된 재생골재의 성분을 물리적 ·화학적 방법을 통해 분석한 후, 총 2계열의 콘크리트 공시체를 제작하여 압축강도를 비롯한 여러 실험값을 산출하여 그 상관관계를 연구하였다. 본 연구결과는 재생골재를 사용한 구조체의 해석, 설계 및 시공에서 기초자료로 활용될 수 있을 것으로 사료된다.

• Computers and Concrete
• /
• 제21권6호
• /
• pp.623-635
• /
• 2018

In order to research the influence of different recycled aggregate contents on the mechanical properties of pervious concrete, the experimental study and numerical simulation analysis of the mechanical properties of pervious concrete with five kinds of recycled aggregates contents (0%, 25%, 50%, 75% and 100%) are carried out in this paper. The experimental test were first performed on concrete specimens of different sizes in order to determine the influence of recycled aggregate on the compressive strength and splitting tensile strength, direct tension strength and bending strength. Then, the development of the internal cracks of pervious concrete under different working conditions is studied more intuitively by $PFC^{3D}$. The experimental results show that the concrete compressive strength, tensile strength and bending strength decrease with the increase of the recycled aggregate contents. This trend of reduction is not only related to the brittleness of recycled aggregate concrete, but also to the weak viscosity of recycled aggregate and cement paste. It is found that the fracture surface of pervious concrete with recycled aggregate is smoother than that of natural aggregate pervious concrete by $PFC^{3D}$, which means that the bridging effect is weakened in the stress transfer between the left and right sides of the crack. Through the analysis of the development of the internal cracks, the recycled aggregate concrete generated more cracks than the natural aggregate concrete, which means that the recycled aggregate concrete is easier to form a coalescence fracture surface and eventually break.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.55-56
• /
• 2014

In this research, the effect of types of aggregate and SP on fundamental properties of ultra-high performance concrete of 80 MPa of compressive strength was evaluated to provide solution for high cost of ultra-high performance concrete. As the results of a series of tests, the mixture using limestone and silica aggregates showed improved workability rather than the mixture using granite aggregate. For compressive strength of UHPC, the UHPC mixtures using limestone and silica aggregates showed higher compressive strength than the UHPC mixture using granite aggregate while all mixtures satisfied target compressive range.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.304-312
• /
• 2001

The objective of this study is to find out effects of horizontal vibration on the compressive strength for 7days and 28 days cured concrete specimens according to the variation of fine aggregate modului, vibration velocities, and times began to vibrate. Four kinds of fine aggregate modului(40, 42, 45, 47%), three of vibration velocities(0.25, 0.5 0.1kine(cm/sec)), and four of times(0, 3, 6, 9hrs after concrete casting) were chosen as the experimental parameters in this study, the vibrations were applied for 30 minutes in each case. From this study, it could be seen that the most increase of compressive strengths were obtained in case of 47% fine aggregate modulus, and 0.25kine of vibration velocity, but the strength was decreased when vibrated after 9hrs from concrete casting.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.439-442
• /
• 2005

This study is to consider the influence strength of concrete according to the kinds of coarse aggregate. The experimental study conditions are varied with different maximum size of coarse aggregate(13mm, 19mm, 25mm) and the weight of water and S/a are constant. The compressive strength properties of the concrete at 7 days, 28 days are examined. According to the experimental results, the compressive strength increased and air content, slump decreased with maximum size of coarse aggregate increased.