• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.58-66
• /
• 1998

In this paper, we analyze the effects of interference canceller on the performance of multitone DS/CDMA system proposed by Vandendorpe[5]. There are various kinds of interference canceller suggested by different researchers including parallel and successive cancellers and we adopt a canceller used by Yoon et al.[9] which is a kind of parallel canceller. We consider three kinds of interferences, that is, multipath interference(MPI), interchannel interference(ICI) and multiple access interference(MAI). The ICI is the interference between multitones. The equations for variances. are derived for the inteferences and thermal noise used for signal to noise ratio calculation. We also consider RAKE reception over multipath channel which is modeled as lowpass equivalent linear filter and three stage interference canceller used for performance improvement. We show the performance results for number of canceller stage, diversity order and number of users and draw some conclusions that interference canceller is effective in multitone DS/CDMA system and the performance is further improved with the higher order of diversity and larger number of PN chips.

• Journal of the Microelectronics and Packaging Society
• /
• 제9권2호
• /
• pp.45-48
• /
• 2002

LTCC system has many kinds of advantages, like low loss, low cost of process, stability of process etc. But it is so hard to adjust the characteristics of passives in ceramic module after fabrication. So the exact prediction of behavior of components in high frequency region upper than GHz must be made. In this procedure, the exact measurement is need. In this study, many kinds of measurement Jigs are compared and optimized, and measurement methods of each parameter are designed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.255-257
• /
• 2014

The installation of light oil facilities or delayed cokers seems to be inevitable in the oil refinery industry due to the heavy crude oil reserves and the increased use of light fuels as petroleum products. Petroleum coke is a byproduct of oil refineries and it has higher fixed carbon content, higher calorific value, and lower ash content than coal. However, its sulfur content and heavy metal content are higher than coal. In spite of disadvantages, petroleum coke might be one of promising resources due to gasification processes. The gasification of petroleum coke can improve economic value of oil refinery industries by handling cheap, toxic wastes in an environment-friendly way. In this study, $CO_2$ gasification reaction kinetics of petroleum coke, various coals and mixing coal with petroleum coke have investigated and been compared by using TGA. The kinetics of $CO_2$ gasification has been performed with petroleum coke, 3 kinds of bituminous coal [BENGALLA, White Haven, TALDINSKY], and 3 kinds of sub-bituminous coal [KPU, LG, MSJ] at various temperature[$1100-1400^{\circ}C$].

• The Korean Journal of Mycology
• /
• 제43권1호
• /
• pp.64-67
• /
• 2015

Several kinds of wild yeasts were isolated and identified from some cereals. A total of twenty six yeast strains were isolated from eleven kinds of cereals. Among twenty six yeast strains, Saccharomyces cerevisiae were five strains and Pseudozyma antarctica were four strains. Five species of Cryptococcus including Cryptococcus magnus were also isolated. Pseudizyma aphidis were isolated from black bean, and Saccharomyces cerevisiae, Cryptococcus flavescens, Cryptococcus magnus and Hannaella zeae were also isolated from glutinous millet.

• Journal of Industrial Technology
• /
• 제25권B호
• /
• pp.183-188
• /
• 2005

Instead of the incandescent lamps the LED lamps have been used on the traffic signal lamp with the advantages of small loss, no lens and long life. In this paper, we have compared three kinds of the LED controller structures and showed the LED array decision methods. We studied the temperature characteristics on LED and the temperature compensation network. The experimental results showed that the electrical characteristics of three kinds of the LED controller structures were different each other. We concluded that the temperature compensation is the important technique, the best compensation network has the ${\pm}10%$ variation for the luminous intensity.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.13-14
• /
• 2013

Multiple output converters (MOCs) are widely used for applications which require various kinds of the output voltages due to its advantages in cost, volume, and efficiency. However, most of the MOCs developed so far can regulate only one output tightly and require as many secondary windings in the transformer as the number of the outputs. In this paper, a novel Time Division Multiple Control (TDMC) method to regulate all the outputs in high precision is proposed and applied to the double ended forward converter for the multiple battery charger. Additional benefit of the proposed topology is to require only one secondary winding in the transformer for all the outputs. The proposed converter can charge two different kinds of batteries or same kind of batteries in different state of charges (SOCs) by CC/CV mode independently with the even degree of tight regulation, thereby satisfying the ripple requirements for each battery.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.75-80
• /
• 2001

The purpose of this study is to investigate the characteristics of springback for various process conditions of the 2D draw-bending operation. The process variables are the forming temperature, the geometry of tools such as punch profile radius(Rp) and die profile radius(Rd). Especially, in order to control the springback, the use of the warm forming method is applied. For the warm draw-bending, five steps of temperature ranges, from room temperature to $200^{\circ}C$, were adopted. And two kinds of steel sheets, namely SCP1 and TRIP(transformation-induced plasticity), the newly developed high strength Steel, were adopted. As a result, the springback was affected by the elevated temperature and the geometry of tools in two kinds of steel sheets.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.323-328
• /
• 2001

Supersonic coaxial, axisymmetric, jets issuing from various kinds of dual coaxial nozzles were experimentally investigated. Four different kinds of coaxial, dual nozzles were employed to characterize the major features of the supersonic, coaxial, dual jets. Two convergent-divergent supersonic nozzles with an impinging angle in the jet axis of the annular jets were designed to have the Mach number 2.0 and used to compare the coaxial jet flows with those discharging from two sonic nozzles. The primary pressure ratio was changed in the range from 4.0 to 10.0 and the assistant jet ratio from 1.0 to 4.0. The results obtained show that the assistant jets from the annular nozzle affect the coaxial jet flows and an increase of both the primary jet pressure ratio and assistant jet pressure ratio produces longer supersonic length of the dual, coaxial jet.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제22권6호
• /
• pp.803-812
• /
• 1998

In this study, testing equipment with which several kinds of valves can be tested was composed. Two kinds of tilting check valves and a swing check valve were tested to analyze their dynamic characteristics. The results of the experiment showed that the tilting check valves protected the pump but that the swing check valve could not protect the pump when the reverse flow rate was high. Also the dynamic equation of the tilting check valve was formulated and simulated using system characteristic constant t$_{c}$ and one method of predicting t$_{c}$ by comparing the results of the simulation with the results of the experiment was proposed.sed.

• Journal of environmental and Sanitary engineering
• /
• 제16권2호
• /
• pp.79-90
• /
• 2001

Commercial liquid seeds are used for supplying active microbial flora to organic wastewater treatment plants of high feed-to-microorganism ratio and to maintain optimal microbial condition during unsteady state operation of the biological wastewater treatment plant. In addition to bacterial cells, the liquid weeds contain various additives for special purposes as well as organic substrates for energy supply. The additives give physical stability for the maintenance of microbial decomposition activity and ability to control the overgrowth of seed strains. In this work, the effects of addition of two kinds of typical substrate additives, poly aluminum chloride(PAC) and poly aluminum sulfate(PAS) on the consitutional total cell counts(CFU/ml) of four kinds of reorganization liquid seeds(RLS I, RLS II, RLS III and RLS IV) were studied experimentally. The addition of PAC and PAS gave negative effect on TCC constitution for the four seeds studied.