• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.702-708
• /
• 2018

3D printing technology is attracting increasing attention as a key technology of the fourth industrial revolution that can change the production paradigm of existing industries. The introduction of construction 3D printing technology has been slower than other industries because of the characteristics of the construction field. On the other hand construction automation using 3D printing is required to reduce the production population, as well as improve productivity and safety. In this study, a construction 3D printing work breakdown structure and link method to a standard estimation system were developed as a preliminary preparation for introducing 3D printing to construction. Based on expert consultation on construction and 3D printing, a hypothetical scenario was developed based on existing construction 3D printing technology. According to the scenario, 16 kinds of works required for 3D printing construction work were derived. The existing work breakdown structure and standard estimation system were analyzed, and the 3D printing work was linked. 3D printing works that were the same as the existing breakdown structure were found, and non-existent works were added to the similar breakdown structure. These results are expected to be helpful for future 3D printing construction management and cost estimation. The actual standard estimation system through 3D printing work will need to be calculated.

• Korean System Dynamics Review
• /
• v.9 no.2
• /
• pp.129-154
• /
• 2008

As a practical means to upgrade urban sustainability, this paper focuses on resource cyclical systems concerned with the waste of electric and electronic equipment (WEEE) in Korea. Borrowing System Dynamics concepts and approaches, it examines behavioral changes of WEEE dynamics to observe whether the existing management methods can be readjusted. The measurement is based upon both reuse and material and thermal recycle simulation works in the individual stage of WEEE discharge, collection, and treatment, going beyond the traditional recycle-only customs. This research estimates that the newly introduced Extended Producer Responsibility (EPR) system would definitely exert a significant impact on the final stage of WEEE treatment, decreasing the final treatment volume in the first half of the research period. The trend, nonetheless, would be reversed in the second half, mainly owing to the additional waste volume originated from the local government and recycling center. Sensitivity analysis poses, among others, that the local government-supported reuse center should take charge of a pivotal role in the long run. The research also shows that sufficientand necessary conditions for the WEEE management and treatment should be given to the combined efforts, both from the private sectors and the public domains. Based on these research findings, the paper recommends that key stakeholders including the producer and the public organizations should devise how to jointly carry out specific agenda centered around partnership or network buildings.

• Journal of the Korean Society for information Management
• /
• v.34 no.3
• /
• pp.151-177
• /
• 2017

This study is to investigate the effects of personal characteristics and perceived interactivity on acceptance of mobile health information service by applying Technology Acceptance Model (TAM). Also it examine whether the perceived interactivity, which is a key variable in the previous research studying the intention of PC-based health information service, works on the mobile environment equally. As a result of the analysis, the relationship between the health hypochondria of personal characteristics and perceived interactivity is negative, and the health concern and perceived interactivity is positive. Also, personal characteristics influence perceived usefulness and perceived ease of use of mobile health information service through perceived interactivity. Therefore, the perceived interactivity in the health information service of web and mobile environment is an important variable to mediate or directly affect other variables.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.53-68
• /
• 2014

The purpose of this study is to verify the relationships among innovative behavior, turnover intention, and job security. An additional purpose was to examine partial mediating effects on psychological ownership. The baseline of analyzing those relationships in this study is that the role of psychological ownership will be a mediator between job security and turnover intention as well as innovative behavior in the organization. To accomplish these purposes, a model was built among job security as predictor variable, the psychological ownership as mediating variable and turnover intention, and innovative behavior as criteria variables based on the studies conducted in the various areas. The 248 questionnaires surveyed from the area of DaeGu and Kyungbuk were used in the statistical analyses. The detail statistical techniques are such as descriptive analysis, reliability analysis, factor analysis, correlation analysis, and multi regression analysis. The results of the study show that job security had positively significant effect on turnover intention and innovative behavior. In addition, only the psychological ownership of organization-level thinking have partial mediating effects between job security and innovative behavior also job security and turnover intention. The results may indicate that the psychological ownership of organization-level thinking be a key factor to alleviate the turnover intention of employees and to encourage the innovative behavior during their works for the small-medium size companies showing the unstable job security.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.53-61
• /
• 2011

After several collapse accidents of large structures in the early 1990s in Korea, the government enacted a law that architectural, engineering and construction firms are obliged to have insurance for projects over a certain size. Particularly, with regard to insurance in design and construction supervision works (i.e. engineering insurance), although several operation-based problems were pointed out from practitioners, still little research has been done on analyzing current regnlartory and operational state and suggesting policy alternatives. Hence, this study applies Delphi technique to solicit current operational problems and propose a series of improvements on engineering insurance based on interview surveys targeting major market participants: municipalities, engineering firms, and insurance companies. Key findings culminate in adopting guarantee limits based on credit evaluation, abrogating joint surety, covering a loss of life, increasing insurance entrance fee, extending time covered, and etc. Reaching a consensus on the proposed alternatives between the market participants will form the foundation for sound developments of construction design and engineering industry.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.531-541
• /
• 2020

The purpose of the study is a theoretical and practical justification for building a mechanism for financing health facilities based on public-private partnerships from a pension fund in regions with environmental problems. The theoretical background is built on works of local and foreign authors on state and non-state pension provisions issues, pension funds' assets management. This study provides an analysis of the health status of the population of the Kyzylorda region; it analyzes also the worldwide and Kazakhstan practice of investing pension funds and implementing projects. There has been legislative and methodological framework for financing health projects based on public-private partnerships in Kazakhstan. The scientific methods considered in this study made it possible to develop a mechanism for financial support for the modernization of a healthcare facility using the budget of pension funds. The authors point out possible risks in the implementation of projects in the field of healthcare and make recommendations on the construction a mechanism for financing healthcare facilities in the regions of Kazakhstan with environmental problems. In addition, they underline the key insights of the analysis, which are requisites for identifying the profitability of project for business and social effects for the public. Factors influencing efficacy, effect and implementation risks identified.

• Journal of Korean Society for Quality Management
• /
• v.51 no.2
• /
• pp.155-170
• /
• 2023

Purpose: Nowadays, the risk assessment system is widely used in many industrial and public areas to reduce the possible risks. The system is used to determine the priorities of the government quality assurance works in Defense Agency for Technology and Quality. However, as the risk assessment system is used for other purposes, there are some items that need improvement, and in this study, we propose improvement plans by benchmarking the risk assessment systems of other institutions. Methods: In this paper, first, the procedures of risk assessment system used in many industrial sites were reviewed, and how each institution specialized and applied the system. Afterwards, by benchmarking various risk assessment systems, an improvement plan on how to operate the risk assessment system in the case of government quality assurance for centrally procured military supplies was presented, and practical application cases were presented to prove the usefulness of the improvement plan. Results: The proposed risk assessment system differs from the existing system in five major aspects. First, inputs, outputs, and key performance indicators were specified from the systematic point of view. Second, risk analysis was analyzed in four dimensions: probability of occurrence, impact, detection difficulty. Third, risk mitigation measures were classified, control, transfer, and sharing. Fourth, the risk mitigation measures were realized through document verification, product verification, process verification, and quality system evaluation. Finally, risk mitigation measures were implemented and the effectiveness of the risk mitigation measures was evaluated through effectiveness evaluation. Conclusions: In order for the risk assessment procedure proposed in this study to be applied to actual work, it is necessary to obtain the consent of the person involved in the work due to the increased time for risk identification and preparation of the government quality assurance log, and a change in the information system that performs the actual work is required. Therefore, the authors of this study plan to actively perform internal seminar presentations and work improvement suggestions to apply these research outputs to actual work.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.539-545
• /
• 2013

Although individual-level factors (e.g., attitudes, personality) have long been associated with day-to-day attendance decisions, increasingly researchers have recognized "the social nature of attendance dynamics and their susceptibility to social control (Johns, 2008)." Implications of this social approach for research would be to focus attention on the causes and effects of absence culture (i.e., absence-related perceptions, beliefs, values), and the effects of absence culture on individual and group attendance within social units. Construction projects typically require workers to work in teams or crews on highly interdependent projects, and, thus, are particularly relevant contexts to study absence culture. In this paper we apply a system dynamics (SD) model to study absence culture by utilizing the advantages of SD in capturing a feedback process and state changes. We were particularly interested in: (a) the awareness of social norms within construction crews that pertained to attendance, (b) the interplay between formal attendance rules (policy) and these social norms, and (c) how these sources of influence affected the decision-making process of construction crew members. We expect that the results of this work will help construction organizations evaluate (or re-consider) the effects of their attendance control policies (e.g., timing, strength, and frequency) within a social context. Moreover, our findings suggest that the key to reducing excessive absences might be to invest time in influencing absence culture directly rather than imposing frequent and strict regulations - which, in turn, may inadvertently fortify a culture that works against the organization's interests.

• Information Systems Review
• /
• v.23 no.3
• /
• pp.159-176
• /
• 2021

Obviating user churn is a prominent strategy to capitalize on online games, eluding the initial investments required for the development of another. Extant literature has examined factors that may induce user churn, mainly from perspectives of motives to play and game as a virtual society. However, such works largely dismiss the service aspects of online games. Dissatisfaction of user needs constitutes a crucial aspect for user churn, especially with online services where users expect a continuous improvement in service quality via software updates. Hence, we examine the relationship between a game's quality management and its user base. With text mining and survival analysis, we identify complaint factors that act as key predictors of user churn. Additionally, we find that enjoyment-related factors are greater threats to user base than usability-related ones. Furthermore, subsequent quasi-experiment shows that improvements in the complaint factors (i.e., via game patches) curb churn and foster user retention. Our results shed light on the responsive role of developers in retaining the user base of online games. Moreover, we provide practical insights for game operators, i.e., to identify and prioritize more perilous complaint factors in planning successive game patches.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.1
• /
• pp.15-25
• /
• 2013

The RIMGIS(River Information Management GIS) has been developed since 2000 for public service and practical applications of related works after the standardization of national river data such as the river facility register report, river survey map, attached map, and etc. The RIMGIS has been improved in order to respond proactively to change in the information environment. Recently, Smart River-based river information services and related data have become so large as to be overwhelming, making necessary improvements in managing big data. In this study a plan was suggested both to respond to these changes in the information environment and to provide a future Smart River-based river information service by understanding the current state of RIMGIS, improving RIMGIS itself, redesigning the database, developing distribution, and integrating river information systems. Therefore, primary and foreign key, which can distinguish attribute information and entity linkages, were redefined to increase the usability of RIMGIS. Database construction of attribute information and entity relationship diagram have been newly redefined to redesign linkages among tables from the perspective of a river standard database. In addition, this study was undertaken to expand the current supplier-oriented operating system to a demand-oriented operating system by establishing an efficient management of river-related information and a utilization system capable of adapting to the changes of a river management paradigm.