• 한국재료학회지
• /
• 제3권2호
• /
• pp.175-184
• /
• 1993

Nd-Fe-B계에 Co와 Al을 첨가한 자석합금을 진공유도용해로에서 제조하여 이들 합금을 단롤법으로 melt-spun시켜 급냉리본을 얻었다. 제작된 급냉리본의 냉각속도에 따른 자기적 성질의 변화를 조사하였고, 최적의 급냉속도에서 제작된 리본을 파쇄하여 resin bond 자석을 제조하였으며, 이들 급냉리본 및 bond자석의 자기적 성질, 미세구조, 결정구조에 관하여 연구, 조사하였다. 이들 급냉리본의 자기적 성질은 급냉속도에 따라 크게 변하였으며 20m/sec전후에서 최적의 자기적 성질을 보였다. 이때의 급냉리본의 미세조직은 Nd-rich의 입계상이 미세한 N$d_2$F$e_14$B결정립을 둘러싼 cell 형의 구조였으며, 특히 Al이 2.1at%첨가된 리본시료에서는 iHc=15.5KOe, Br=7.8KG, (BH)max=8.5MGOe의 자기적 성질을 나타내었다. 최적의 급냉속도에서 제작된 리본을 polyamide resin과 2.5wt%의 비율로 혼합하여 상온에서 성형, 결합시켜 제작한 bond자석에서 보다 현저히 향상되었으며 유지시간이 8분인 경우 iHc=10.8KOe, Br=7.3KG, (BH)max=8.0MGOe의 값을 가졌다. 한편, 자구구조는 maze pattern이 주로 관찰되어 자화용이축인 C축이 배열되었으며 bond자석에서보다 hot-press 자석에서 자구폭이 보다 작았다.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.381-391
• /
• 1999

A new 5th generation adhesive system(ONE-STEP) has been supplied which operators can apply to conditioned tooth surfaces by one simplified step. The purpose of this study was to determine whether different methods of adhesive application and various air drying duration after applying adhesive affect the shear bond strength of composite resin to dentin, and to evaluate the adhesive pattern of composite resin and dentin under SEM. Seventy-seven extracted human molar teeth were cleaned and mounted in palstic test tubes. The occlusal dentin surfaces were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A.). Teeth were randomly divided into 7 groups (n=11), In experimental A group, adhesive was applied to dentin with agitation for 20 sec. In experimental N-A group, adhesive were continuously applied to dentin for 20 sec. Also control and experimental 1, 2, 3, 4 groups were dried for 10, 0, 5, 20, 30 seconds after applying adhesive, respectively, Adhesives were light cured for 10 sec. A gelatin capsule 5mm in diameter was filled with Aelitefil$^{TM}$ composite resin, placed on the treated dentin surface and light cured for 40 see, from three sides, All specimens were stored in distilled water at room temperature for 24 hours. The shear bond strengths were measured using a universal testing machine(AGS-1000 4D, Japan) at a crosshead speed of 5mm/min. An one-way ANOVA and LSD test were used for statistical analysis of the data. For SEM evaluation, seven specimens were made and sectioned. Representive postfracture and seven specimens were mounted on brass stubs, sputter-coated with gold and observed under SEM. The results were as follows : 1. The shear bond strength of experimental A group which adhesive were applied to dentin with agitation was higher than that of experimental N-A group (continuous application), and there was significant difference between two groups (p<0.01). 2. The interface between composite and dentin according to different application methods showed close adaptation in experimental A group and showed tinny gap in experimental N-A group. 3. The shear bond strength accoding to various air drying duration was the lowest value(7.57${\pm}$2.60 MPa) in experimental 1 group, so there was significant difference between experimental 1 group and other four groups (p<0.05). But there was no significant difference of shear bond strength between four groups (p>0.05). 4. The interface between composite and dentin according to various air drying duration showed close adaptation in control group and tinny gap in experimental 3 and 4 groups. But experimental 1 and 2 groups showed $30{\mu}$ and 6 - $10{\mu}m$ thick gaps, respectively.

• Archives of Plastic Surgery
• /
• 제34권2호
• /
• pp.209-216
• /
• 2007

Purpose: The ischial area is by far the most common site of pressure sores found in wheel chair bound paraplegic patients, because greatest pressure is exerted from the body on this area in a sitting position. Even after a series of successful pressure sore treatments, the site is very prone to relapse by the simplest ordinary tasks of everyday life. Therefore, it is crucial to preserve the main pedicle during primary surgery. Various surgical procedures employed to treat pressure sores such as myocutaneous flap and perforator flap have been introduced. After introduction of ischial sore treatment using the inferior gluteal artery perforator (IGAP) has been made, the authors experienced favorable clinical results of patients who have undergone IGAP flap procedure in a three year time period. Methods: A total of 17 patients received IGAP flap surgery in our hospital from January 2003 to May 2006, among which 14 of them being males and 3 females. Surgery was performed on the same site again in 6(35%) patients who had originally relapsed after receiving the conventional method of pressure sore surgery. Patients' average age was 49.4(27-71) years old. Most of the patients were paraplegic(11 cases, 65%) and others were either quadriplegic(4 cases, 23%) or ambulatory(2 cases, 12%). Based on hospital records and clinical photographs, we have attempted to assess the feasibility and practicability of the IGAP flap procedure through comparative analysis of several parameters: size of defective area, treatment modalities, occurrence of relapses, complications, and postoperative treatments. Results: The average follow-up duration of 17 subjects was 25.4 months(5-42 months). All flaps survived without any necrosis. Six cases were relapsed cases from conventional surgical procedures. All of them healed well during our follow-up study. Postoperative complications such as wound dehiscence and fistula developed in some subjects, but all were well healed through secondary treatment. A total of 2 cases relapsed after surgery. Conclusion: The inferior gluteal artery perforator flap is an effective method that can be primarily applied in replacement to the conventional ischial pressure sore reconstructive surgery owing to its many advantages: ability to preserve peripheral muscle tissue, numerous possible flap designs, relatively good durability, and the low donor site morbidity rate.

• 한국재료학회지
• /
• 제9권12호
• /
• pp.1252-1262
• /
• 1999

자동차 휠, 멤버 등의 소재로 사용되는 인장강도 580MPa급 열연강판의 버링성형성을 향상시키기 위하여 강판의 신장 플랜지성(stretch-flangeability)에 대한 미세조직 및 열간압연후 냉각인자의 영향에 대하여 검토하였다. 열간압연후 3단 냉각제어 및 권취온도의 극저온화에 의하여 신장플랜지성이 우수한 페라이트-베이나이트 복합조직강의 제조가 가능하며, 3단 제어냉각에서 강판의 온도를 $Ar_3$ 직하의 페라이트변태역에서 일정 시간 유지하면 페라이트 변태 및 NbC의 석출이 조장됨을 확인하였다. 페라이트-베이나이트 복합조직 열연강판의 우수한 신장플랜지성은 3단 냉각 및 극저온 권취에 의한 등축 페라이트 분율의 증가, 입계 세멘타이트의 미세화 및 구성 상간의 경도차 저하에 의하여 타발공정에서의 미소균열 생성 및 전파가 억제되기 때문인 것으로 판단되었다. 아울러 0.08wt%C-1.5wt%Mn-0.04wt%Nb 성분계를 이용하여 제조된 인장강도 580MPa급 페라이트-베이나이트 복합조직 열연강판은 연신율 22% 이상, 구멍확장율 (신장플랜지성) 90% 이상의 재질특성을 가지며, 버링비 60% 이상의 자동차 휠 디스크에 적용 가능한 것으로 판명되었다.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.493-501
• /
• 2016

본 연구에서는 급곡선과 급구배가 많은 산악 도로 상의 궤도에서 운행할 수 있는 산악트램의 추진시스템 핵심 기술을 개발하였다. 국내 산악 관광지는 겨울철 폭설과 결빙에 의해 교통이 통제되고 있어 지형 조건 뿐만 아니라 기후 조건에도 무관한 산악철도가 필요하다. 먼저, 일반적인 120‰ 구배 등반에 소요되는 견인전동기 출력을 고려하여 추진시스템을 설계하였으며, 추진장치 설치 공간을 고려하여 동력 전달 계통을 설계하고 감속기 및 동력 전달축을 개발하였다. 급구배 상승을 위해 필요한 랙앤피니언 추진장치의 강체 접촉에 의한 진동 소음을 줄이기 위해 탄성 피니언을 개발하여 적용하였으며, 충격 비교 시험을 통해 기존 강체 피니언에 비해 진동이 1/3이하로 감소됨을 확인하였다. 반경 10m의 급곡선을 운행할 수 있도록 개별 회전 차륜 차축을 개발하였다. 또한 급구배 주행중 제동력 향상을 위해 밴드 제동장치를 개발하였으며, 제동력 시험을 통해 요구 제동력을 발휘할 수 있음을 확인하였다. 개발된 주요 부품은 시험을 통해 성능을 검증하였고, 최종적으로 급구배 및 급곡선 운행 대차시스템에 적용된다.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제28권1호
• /
• pp.1-17
• /
• 2014

최근 학생의 수학적 사고력 및 문제해결능력의 신장이 강조되고 있다. 그럼에도 불구하고 실제 학생들이 문제를 해결하는 과정을 살펴보면 주어진 문제 유형과 관련된 알고리즘을 사용하여 기계적으로 해결하는 경우가 많다. 이러한 문제해결 방법으로는 최근 강조되고 있는 목표를 달성하기 어려울 뿐만 아니라 오히려 오류나 오 개념을 형성할 수도 있다. 그런데 일관성을 갖는 오류는 현재 학습자의 인지능력 상태를 파악할 수 있게 하고, 학습 실패 원인에 대한 정보를 제공해 준다는 긍정적 측면이 있다. 이에 본 연구에서는 톱니바퀴 관련 문제해결 과정에서 학생이 보이는 오류를 분석하여 그 원인을 진단하고, 오류의 교정과 예방을 위한 바람직한 지도방안을 마련하고자 하였다. 학생의 오류를 분석한 결과 사용할 수 있는 다른 방법이 있음에도 불구하고 비례식만을 이용하여 해결하려고 하였으며, 자신이 세운 비례식이 옳은지 그른지에 대해서도 전혀 고려를 하지 않았다. 이는 다른 많은 요인이 있겠으나, 교과서와 교육과정의 구성도 중요한 요인 중 하나라고 할 수 있다. 이와 같은 결과를 토대로 문제해결과 관련된 세 가지 접근방법과 톱니바퀴 관련 문제와 연관되어 교육과정에 제시되는 개념의 내용과 순서 및 지도방안에 대한 논의와 시사점을 제시하였다.

• Applied Microscopy
• /
• 제28권3호
• /
• pp.363-377
• /
• 1998

After the investigation on the eye of Incilaria fruhstorieri with light and electron microscopes, the following results were obtained. The eye of Incilaria fruhstorferi comprises cornea, lens, vitreous body, retina, and optic nerve inward from the outside. Cornea is composed of squamous, cuboid, columnar and irregular cells, which appear to be light due to their low electron density. In their cytoplasms, glycogen granules, multivesicular body, and nucleus were observed. Vitreous body, located behind non-cellular transparent lens, is filled with long and short microvilli protruding from the retinal epithelia. Retinal epithelium, the organ to perceive objects, is divided into four parts; microvillar layer pigment layer, nuclear layer, and neutrophils layer, from the apical portion. Microvillar layer consists of the type-I photoreceptor cells and pigmented granule cells. In the apical portion of their cytoplasms, long microvilli (length, $19{\mu}m$) , short microvilli (length, $8{\mu}m$), and rolled microvilli grow thick in the irregular and mixed forms. Photoreceptor cells are classified into type-I and type-II, according to their structures. The type-I cell has the apical portion rising roundly like a fan and the lower part which looks like the helve of a fan. In the cytoplasm of the apical portion, there are clear vesicles, cored vesicles, ovoid mitochondria, and microfilaments, and in the cytoplasm of the lower part, photic vesicles with their diameters about 60nm aggregate densely. The type-II photoreceptor cell, located at the lower end of the type-I cells, has a very large ovoid nucleus 3nd no microvilli. In the cytoplasm of the type-II cell, the photic vesicles with sizes 60nm aggregate more densely than in the cytoplasm of the type-I cell. Pigmented cells are classified into type-A and type-B, according to their structures. The type-A is identified to be a large cell containing round granules (diameter, $0.5{\mu}m$) of very high electron density, while the type-B is identified as a small cell where the irregular granules (diameter, $0.6{\mu}m$) of a little lower electron density amalgamate. Nuclear layer ranges from the bottom of pigment layer to the top of the capsule, and contains three kinds of nuclei (nuclei of the type-II photoreceptor cell, pigmented granule cell, and accessory neuron). The capsules covering the outmost part of the eyeball are composed of collagenous fiber and three longitudinal muscle layers (the thickness of each longitudinal muscle layer, $0.4{\mu}m$) and thick circular muscle layer (thickness, $0.3{\mu}m$). Around the capsules, there is a neurophile layer consisting of neurons and nerve fibers. Each neuron has a relatively large ovoid nucleus for its cytoplasm, and in the karyosome, large lumps of keterochromatin form a wheel nucleus.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1526-1526
• /
• 2001

To improve the accuracy of sweetness sensor in automated sorting operations, it is necessary to clarify unevenness of the sugar content distribution within fruits. And it is expected that the technique to evaluate the content distribution in fruits contribute to the development of the near-infrared (NIR) imaging spectroscopy. Sugiyama (1999) had succeeded to visualize the distribution of the sugar content on the surface of a half-cut green fresh melon. However, this method cannot be applied to red flesh melons because it depends on information of the absorption band of chlorophyll (676 nm), which is affected by the color of the fresh. The objective of this study was to develop the universal visualization method depends on the absorption band of sugar, which can be applied to various kinds of melons and other fruits. The relationship between the sugar contents and absorption spectra of both green and red fresh melons were investigated by using a NIR spectrometer to determine the absorption band of sugar. The combination of 2$\^$nd/ derivative absorbances at 902 nm and 874 nm was highly correlated with the sugar contents. The wavelength of 902 nm is attributed to the absorption band of sugar. A cooled charge-coupled device (CCD) imaging camera which has 16 bit (65536 steps) A/D resolution was equipped with rotating band-pass filter wheel and used to capture the spectral absorption images of the flesh of a vertically half-cut red fresh melon. The advantage of the high A/D resolution in this research is that each pixel of the CCD is expected to function as a detector of the NIR spectrometer for quantitative analysis. Images at 846 nm, 874 nm, 902 nm and 930 nm were acquired using this CCD camera. Then the 2$\^$nd/ derivative absorbances at 902 nm and 874 nm at each pixel were calculated using these four images. On the other hand, parts of the same melon were extracted for capturing the images and squeezed for the measurement of sugar content. Then the calibration curve between the combination of 2$\^$nd/ derivative absorbances at 902 nm and 874 nm and sugar content was developed. The calibration method based on NIR spectroscopy techniques was applied to each pixel of the images to convert the 2$\^$nd/ derivative absorbances into the Brix sugar content. Mapping the sugar content value of each pixel with linear color scale, the distribution of the sugar content was visualized. As a result of the visualization, it was quantitatively confirmed that the Brix sugar contents are low at the near of the skin and become higher towards the seeds. This result suggests that the visualization technique by the NIR imaging spectroscopy could become a new useful method fer quality evaluation of melons.

• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.240-250
• /
• 1999

The purpose of this study was to evaluate the effect of different etching time on the shear bond strength and adaptibility of composite to enamel and dentin when used one-bottle adhesive Prime & Bond$^{TM}$ 2.0. The proximal and occlusal surfaces of 88 extracted human molars were ground to expose enamel(n=44) and dentin (=44) using diamond wheel saw. Teeth were randomly assigned to four test groups(n=11) and received the following treatments : Control group were conditioned with 36% phosphoric acid for 20 sec. according to the manufacturer's directions. Experimental 10 sec. group, 30 sec. group and 60 sec. group were conditioned with 36% phosphoric acid for 10 sec., 30 sec. and 60 sec., respectively. Teeth were rinsed and dried for 2 sec. Prime & Bond$^{TM}$ 2.0 were applied according to the manufacturer's directions and Spectrum$^{TM}$ TPH composite resins were bonded to enamel and dentin surfaces. All specimens were stored in distilled water for 24 hours. Eighty specimens were sheared in a Universal Testing Machine with a crosshead speed of 5mm/minute. One way ANOVA and LSD test were used for statistical analysis of the data. Failure modes of all specimens after shear bond strength test were examined and listed. Also, representive postfracture modes and eight specimens were examined under scanning electron microscope. The results of this study were as follows: 1. The shear bond strength to enamel was the highest value in 30 sec. group (20.68${\pm}$8.54MPa) and the lowest value in 10 sec. group (14.92${\pm}$6.07MPa), so there was significant difference of shear bond strength between two groups (p<0.05). But there was no significant difference among other groups (p>0.05). With longer etching time to enamel from 10 sec. to 30 sec., higher the shear bond strength was obtained, but the shear bond strength was decreased at 60 sec. etching time. 2. The shear bond strength to dentin was the highest value in control group (13.08${\pm}$6.25MPa) and the lowest value in 60 sec. group (9.47${\pm}$3.35MPa), but there was no significant difference among the all groups (p>0.05). The eching time over 20 sec. decreased the shear bond strength to dentin. 3. In SEM observation, the enamel and resin interfaces were showed close adaptation with no relation to etching time of enamel. And the dentin and resin interfaces were showed close adaptation at 20 sec. and 30 sec. etching time, but showed some gaps at 10 sec. and 60 sec. etching time. Accordingly, these results indicated that a appropriate etching time in Prime & Bond$^{TM}$ 2.0 was required to be 30 sec. in enamel and 20 sec. in dentin for the high shear bond strength and good adaptation between the composite resin and tooth substance.

• 환경영향평가
• /
• 제26권1호
• /
• pp.11-26
• /
• 2017

철도 소음의 환경영향평가 업무에 있어서 소음도에 대한 정확한 예측이 중요하지만, 국내에서는 overall 소음도의 거리별 측정을 통한 경험식이 근사적으로 이용되고 있다. 본 논문에서는 소음원과 소음전파의 주파수 특성을 고려하여 철도 소음의 예측 정확도를 향상할 수 있는 예측 모델을 제안하였다. 먼저 철도 소음원을 궤도(레일 및 침목), 차륜, 동력, 공력 성분으로 구분하여 각각의 옥타브 밴드 주파수별 음향파워와 속도계수를 정의하고 음향 조도와 궤도/교량 특성을 반영할 수 있는 보정항을 도입하였다. 소음원에서 수음점까지의 전파 특성은 ISO 9613-2를 적용하여 기하학적 확산, 대기 흡음, 지면 효과, 장애물의 회절에 따른 감쇠 및 지향특성을 반영하여 계산하였다. 소음원 음향파워와 지향인자를 추정하기 위하여 전동 소음원 해석 모델 및 수치해석 결과와 통과 소음도 측정값을 이용하였다. 본 철도 소음 예측 모델을 이용하여 여러 철도 차량과 궤도 유형에 따라서 예측한 소음도를 측정값과 비교하여 정확도를 검증하였으며 기존 예측 모델보다 비교적 정확한 예측이 가능하였다. 따라서 본 결과는 철도 환경 소음의 정확한 영향 예측과 효율적인 소음 저감 대책 수립에 활용될 수 있을 것이다.