• Water Engineering Research
• /
• v.2 no.1
• /
• pp.21-31
• /
• 2001

In this study, laboratory experiments were performed to investigate the flow characteristics of a two-dimensional neutrally buoyant jet in the inlet region of a rectangular laboratory settling tank. Velocity measurements were made with a three-component ADV. Two types of baffles were installed in front of two-dimensional slot; a one-sided and a two-sided baffle. The flow fields from a plane jet impinging on these two types of baffles and a plane jet without a baffle showed quite different characteristics. To concentrate on investigating these flow characteristics, the effects of density currents due to temperature difference or the presence of sediments were not studied. Results of the experiments reveal that the use of the two-sided baffle results in the shortest inlet region. Also shown is that, in addition to the types of baffles, the Froude number turns out to be an important factor in the extent of the inlet region.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.245-248
• /
• 2011

Many researches have been carried out to improve light absorption in the crystalline silicon solar cell fabrication. The rear reflection is applied to increase the path length of light, resulting in the light absorption enhancement and thus the efficiency improvement mainly due to increase in short circuit current. In this paper, we manufactured the silicon solar cell using the mono crystalline silicon wafers with $156{\times}156mm^2$, 0.5~3.0 ${\Omega}{\cdot}cm$ of resistivity and p-type. After saw damage removal, the dielectric film ($SiN_x$)on the back surface was deposited, followed by surface texturing in the KOH solution. It resulted in single-side texturing wafer. Then the dielectric film was removed in the HF solution. The silicon wafers were doped with phosphorus by $POCl_3$ with the sheet resistance 50 ${\Omega}/{\Box}$ and then the silicon nitride was deposited on the front surface by the PECVD with 80nm thickness. The electrodes were formed by screen-printing with Ag and Al paste for front and back surface, respectively. The reflectance and transmittance for the single-sided and double-sided textured wafers were compared. The double-sided textured wafer showed higher reflectance and lower transmittance at the long wavelength region, compared to single-sided. The completed crystalline silicon solar cells with different back surface texture showed the conversion efficiency of 17.4% for the single sided and 17.3% for the double sided. The efficiency improvement with single-sided textured solar cell resulted from reflectance increase on back surface and light absorption enhancement.

• Geomechanics and Engineering
• /
• v.11 no.1
• /
• pp.141-160
• /
• 2016

This study elucidates the uplift behaviors of the straight-sided and belled shafts. The field uplift load tests were carried out on 18 straight-sided and 15 belled shafts at the three collapsible loess sites under an arid environment on the Loess Plateau in Northwest China. Both the site conditions and the load tests were documented comprehensively. In general, the uplift load-displacement curves of the straight-sided and belled shafts approximately exhibited an initial linear, a curvilinear transition, and a final linear region, but did not provide a well defined peak or asymptotic value of the load, and therefore their uplift resistances should be interpreted from the load test results using an appropriate criterion. Nine representative uplift resistance interpretation criteria were used to define the "interpreted failure load" for each of the load tests, and all of these interpreted uplift resistances were normalized by the failure threshold, $T_{L2}$, obtained using the $L_1-L_2$ method. These load test data were compared statistically and graphically. For the straight-sided and belled shafts, the normalized uplift load-displacement curves were respectively established by the plots that related the mean interpreted uplift resistance ratio against the mean displacement at the corresponding interpreted criteria, and the comparisons of the normalized load-displacement curves were made. Specific recommendations for the designs of uplift belled and straight-sided shafts in the loess were given, in terms of both capacity and displacement.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.132-134
• /
• 2001

In this paper, by designning the width of the stator coil, double sided excitation LDM with multi-separated winding which is possible to obtain the constant thrust force is proposed. Using Maxwell 2D, Empulse, we were proved the characteristic analysis of LDM accoding to ratio magnet width venus coil width of LDM. Though designning for double sided excitation LDM with multi-separated winding, we could be achieved the constant thrust and rapidly time responses within the operating region.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.44-47
• /
• 1989

In this paper, We analyzed the End Effect of Single-sided Linear Induction Motor by combination of Finite Element Method in Active region and 0- 1 order Boundary Element Method in Entry, Exit region.

• Steel and Composite Structures
• /
• v.20 no.4
• /
• pp.951-962
• /
• 2016

The determination of the stress intensity factor at the crack tip is one of the most widely used methods to predict the fatigue life of aircraft structures. This prediction is more complicated for repaired cracks with bonded composite patch. This study is used to compute the stress intensity factor (SIF) and crack opening displacement (COD) for cracks repaired with single and double-sided composite patches. The effect of the presence of disbond region in adhesive at the crack was taken into consideration. The results show that there is a considerable reduction in the asymptotic value of the stress-intensity factors and the crack opening displacement at the crack tip. The use of a double-sided patch suppresses the bending effect due to the eccentricity of the patch on one side only.

• Journal of the Korean Society of Earth Science Education
• /
• v.1 no.1
• /
• pp.41-51
• /
• 2008

For teaching-learning to geological region of earth science part in science education, middle school, the practical uses of natural science museum are very effective. So, the appropriate uses of the natural science museum are necessary for the teaching and learning of Science Education. This study aims to consider the presentation characteristics of the natural science museum and to examine how is effective it to geological region in middle school science curricula on those uses. From the results, the natural science museum is low in multi-sided and open-endedness presentation characteristics but high in ones of accessible characteristic. And its presentations are good in multimodal characteristics using supported materials but relatively low in relevant and multimedia ones. In the museum, diorama and self-performing presentation types are not but internet ones are most. The presentations of the natural science museum are mainly assigned to knowledge region linked to basic science concepts but relatively insufficient in STS aspects, on the basis of connection the presentations with middle school science curricula. It is respected that these insufficiencies might be diminished by variable arrangements of and explanations to the presentations for understanding improvements. And, applies to the presentations in STS may be encountered, if multi-sided observations to them is available.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1033-1035
• /
• 2003

Linear induction motor with multilayer region of the single-sided is analyzed considering multi region traveling wave problem. A hybrid method of analysis consisting of field analysis in conjunction with the multilayer transfer matrix concept with adjustment of secondary iron permeability to match the tangential magnetizing field in each layer is developed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.5
• /
• pp.2401-2405
• /
• 2016

Background: Both colorectal cancer (CRC) and diverticular disease (DD) are common in the affluent West, and their prevalence is also increasing in the rest of the world with economic development. Both diseases have common epidemiologic characteristics; increasing incidence, more common with advancing age and related to specific dietary changes. However, studies of associations between the two have generated mixed results with some showing positive correlations, whilst others have shown no or negative links. Most of these studies have been from the West with study populations that were predominantly Caucasians. Here the focus was on DD and colorectal neoplasms, including CRC, in Brunei. Materials and Methods: All patients who had undergone complete colonoscopy between 2011 and 2014 were identified and retrospectively reviewed. Patients under the age of 18 years old or had previous colonic surgeries (including previous CRC resection) were excluded. Results: The total number of colonoscopies included in the study was 2,766 (mean age $53.2{\pm}14.8$ years old, male 51.8%), of which DD, CRC and colonic polyps were detected in 17.3%, 4.7% and 28.2% respectively. The proportions of DD, polyps and CRC increased proportionally with age (<30 years, 30-49, 50-69 and ${\geq}70$). Overall, there was no association between the presence of DD and CRC (3.6% vs. 5.0%, p=0.179) but there was a significant association between CRC and left sided DD (p=0.034 by trend). There were also a significant association between presence of DD and polyps (36.1% vs. 28.2%, p=0.001), in particular with right-sided and pan-DD (p=0.001 for trend). Conclusions: Our study showed that the prevalence of DD, CRC and polyps increases with age. There were significant associations between presence of left-sided DD with CRC and right-sided or pan-DD with colonic polyps. This suggests shared risk factors. Further studies are required to assess links in other countries of the Asian Pacific region.

• Journal of Veterinary Clinics
• /
• v.33 no.5
• /
• pp.304-306
• /
• 2016

A 12-month-old, 3.0-kg, male, Scottish fold cat was referred to Irion animal hospital with dyspnea and cardiac murmur. In radiograph, right-sided cardiomegaly and pleural effusion were identified. In echocardiographic examination, abnormal stenotic region was identified in right ventricle and dilation of right atrium and concentric hypertrophy of interventricular septum and the free wall of right ventricle were also identified. In the stenotic region, abnormal muscular band was identified. The turbulent flow was identified in infundibular region of right ventricular outflow tract with color-Doppler examination and high velocity flow (4.0 m/s) was also identified in stenotic region. With these results, double-chambered right ventricle (DCRV) was diagnosed.