• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.286-291
• /
• 2016

This study was carried out to evaluate the feasibility of air-stripping by DIWS(Dip Injection Wet Scrubber) system on high concentration of ammonia wastewater more than 10,000 mg/L. In the case of changing temperature from $30^{\circ}C$ to $70^{\circ}C$ maintaining pH 12.5 within the 72 hours, the removal efficiency of T-N by the present treatment plant was increased to 90.5% which was initially kept 70.3%. Although the high concentration of T-N with 9,120~12,955 mg/L was treated by micro-bubble through DIWS system maintaining the temperature of $30^{\circ}C$ within the 20 hours, the removal efficiency of T-N reached 91.9%, which indicated the possibility of air-stripping.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.654-670
• /
• 2020

Workers at construction sites are easily exposed to many dangers and accidents involving falls, tripping, and missteps on stairs. However, researches on construction site monitoring system to prevent work-related injuries are still insufficient. The purpose of this study was to develop a wearable textile pressure insole sensor and examine its effectiveness in managing the real-time safety of construction workers. The sensor was designed based on the principles of parallel capacitance measurement using conductive textile and the monitoring system was developed by C# language. Three separate experiments were carried out for performance evaluation of the proposed sensor: (1) varying the distance between two capacitance plates to examine changes in capacitance charges, (2) repeatedly applying 1 N of pressure for 5,000 times to evaluate consistency, and (3) gradually increasing force by 1 N (from 1 N to 46 N) to test the linearity of the sensor value. Five subjects participated in our pilot test, which examined whether ascending and descending the stairs can be distinguished by our sensor and by weka assessment tool using k-NN algorithm. The 10-fold cross-validation method was used for analysis and the results of accuracy in identifying stair ascending and descending were 87.2% and 90.9%, respectively. By applying our sensor, the type of activity, weight-shifting patterns for balance control, and plantar pressure distribution for postural changes of the construction workers can be detected. The results of this study can be the basis for future sensor-based monitoring device development studies and fall prediction researches for construction workers.

• Korean Journal of Food Science and Technology
• /
• v.9 no.4
• /
• pp.306-312
• /
• 1977

A mixed culture of Candida tropicalis and Trichosporon cutaneum was carried out using a n-paraffin medium. The growth of C. tropicalis was markedly enhanced by the mixed culture with T. cutaneum which did not grow on n-paraffin. C. tropicalis extracellularly excreted free fatty acids as metabolic products of n-paraffin in the culture medium. T. cutaneum appeared to assimilate these free fatty acids which were growth inhibitors for C. tropicalis, threreby enhancing the growth of C. tropicalis.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.2
• /
• pp.171-176
• /
• 2006

Objectives : The objective of this study is to assess the factors influencing biological monitoring of textile coating factory workers exposed to N,N-dimethylformamide(DMF). Methods : We studied 35 workers who were occupationally exposed to DMF from 9 textile coating factories. The study was carried out in two phases; summer and winter. While air concentration of DMF, temperature and humidity were assessed in order to monitor the atmospheric conditions, biological monitoring was done to determine the internal dose by analyzing the N-methylformamide(NMF) collected from urine at the beginning and end of the shift. Questionnaires and medical surveillance were also obtained during the two phases. Results : Median air concentrations of DMF in winter and summer were 1.85 ppm and 2.78 ppm respectively. Also the difference between the urinary NMF concentration at the beginning and end of the shift $({\Delta}NMF)$ was always significant in each season (P < 0.001). The correlations between log DMF in air, log end-of-shift urinary NMF (r=0.555, P < 0.001) and log ${\Delta}NMF$ (r = 0.444, P < 0.001) was statistically significant in summer. The temperature, humidity, a shift system and different styles of clothing worn were significantly different during the two phases. In a multivariate analysis, temperature and the concentration of DMF in the air were the main factors influencing biological monitoring of textile coating factory workers. Conclusions : Concerning more comprehensive prevention measures to reduce exposure for those workers occupationally exposed to DMF, dermal exposure conditions such as temperature and humidity together with the air concentration of DMF should be assessed and biological monitoring is necessary to reduce adverse health effects, especially during the summer.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.33-38
• /
• 2004

Molecular modeling of gas permeation through zeolite membranes with/without intercrystalline region was carried out. Molecular dynamics (MD) and Monte Carlo (MC) simulations were performed to estimate the diffusion coefficient and adsorption parameters respectively, and our proposed combined method of molecular simulation techniques with a permeation theory (CMP) was used to estimate gas permeability. The calculated permeability of gases (Ar, He, Ne, $N_2$, $0_2$, $CH_4$) at 301 K for the single crystal membrane model was about one order of magnitude larger than the experiential values, although the dependence on the molecular weight of the permeating species agreed with experiments. On the other hand, the estimated permeability using the diffusivity and adsorption parameters of the intercrystalline region model was in good agreement with the experiments. The consistency between experiments and the estimated values means the importance of considering the intercrystalline region and the validity of CMP method to predict the performance of zeolite membranes.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.624-630
• /
• 1999

In order to investigate the position of various fatty acids attached to glycerol and the specificity of Lipolase-100T, hydrolysis of fish oil was carried out with Lipolase-100T derived from Aspergillus oryzae. The amounts of free fatty acids produced from triglyceride, 1,2(2,3)-diglyceride, 1,3-diglyceride, and 2-monoglyceride and conversion rates of 1,2(2,3)-diglyceride to 1,3-diglyceride and 2-monoglyceride to 1(3)-monoglyceride were also calculated. The ratio of 1,2-diglyceride content to 1,3-diglyceride was higher than 70 in the early period of hydrolysis. The fatty acid content of the glyceride mixture after 72 h of hydrolysis was compared with that of fish oil, and it was found that polyunsaturated fatty acids such as C16:4, C20:4 n-3, C20:5 n-3, C21:5 n-3, C22:5 n-3 and C22:6 n-3 were located in the 2-position of glycerol. Material balance of each component in the hydrolysis system was written to obtain a set of simultaneous linear equations. The theoretical quantity of free fatty acids produced from triglyceride, 1,2-diglyceride, 1,3-diglyceride, and monoglyceride, respectively, were calculated by solving the linear equation system. The conversion rate of 1,2(2,3)-diglyceride to 1,3-diglyceride and that of 2-monoglyceride to 1(3)-monoglyceride were also obtained. The results showed that the migration rate of 1,2(2,3)-diglyceride to 1,3-diglyceride was higher than the hydrolysis rate of 1,2(2,3)-diglyceride to 2-monoglyceride and the conversion rate of 2-monoglyceride to 1(3)-monoglyceride was extremely low.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.197-199
• /
• 2003

In this work, the Greitzer's B-parameter model is applied for analyzing the stall and surge characteristics. The four parameters in the model are highlighted in order to establish the influence of each parameter on the system. First of all, the governing equations of stall and surge behavior are solved numerically using fourth-order Runge-Kutta method. The Taguchi method is then used to analyze the results generated to obtain the extent of effects of the parameters on the system by varying the parameters in a series of combinations. Finally, a thorough analysis is carried out on the results generated from the Taguchi method and the graphs.

• Reproductive and Developmental Biology
• /
• v.38 no.3
• /
• pp.129-136
• /
• 2014

This study was carried out to elucidate the effect of antibiotic-free rearing system(ARS) on cortisol level, stress hormone, and fatty acid content in the edible muscle tissues, that were of M. longissimus in Hanwoo. These cattle were reared in two different systems including antibiotic-free (ARS) and conservative system (CRS). To increase the experimental reliability, the muscle samples were purchased 3 times from 3 Korean brands of beef produced with ARS or CRS. In the muscle tissue, cortisol level was significantly lower in ARS than CRS, (p=0.0176). But the levels of total saturated- and unsaturated-fatty acids were not significantly different between ARS and CRS (p>0.05). Of total fatty acids, the total saturated fatty acid tended to be greater in CRS and the total unsaturated fatty acid tended to be greater in ARS. However, of the total unsaturated fatty acids, the level of n-6 unsaturated fatty acids was significantly higher in ARS than CRS (p=0.0040). Especially, ${\alpha}$-linolenic acid (ALA) and ${\gamma}$-linolenic acid (GLA) levels were significantly higher in ARS (p<0.01). The n-6 fatty acid content and cortisol level in muscle tissue were negatively correlated at p=0.0140. In conclusion, ARS may produce beef with higher quality which contains lower cortisol and greater n-6 fatty acids, such as ALA and GLA.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.27-32
• /
• 2009

A technical system generally comprise a number of subsystems and components that are interconnected in such a way that the system is able to perform a set of required function. Because of the complex system structure with serial, parallel and bridged connections, some certain subsystems or components are more critical than the others. The main concern of a reliability engineer is to identify potential failures and to prevent these failures from occurring. In order to prevent fatal failures, proper inspections and maintenance actions for each component are required Considering above objectives of reliability engineers and characteristics of a practical system, several practical method for evaluating system and component reliabilities have developed namely Birnbaum's and Fussell & Vesely's measures. However there are several critical weaknesses in traditional calculation process as the target system gets larger. In this paper, a new technique for calculating component's structural importance is proposed and compared to Birnbaum's with representative system examples (serial, parallel. k out of n, and bridge type).

• Journal of Power System Engineering
• /
• v.15 no.2
• /
• pp.55-60
• /
• 2011

The popularity of diesel engines is derived primarily from their higher thermal efficiency resulting from higher compression ratio. NOx removal from the diesel emissions is very important to meet stringent emission regulations. NOx emission from diesel engines is removed by an urea-SCR or an LNT system. The urea-SCR system needs the urea-solution supply system with concentration and level sensor. This study was carried out to develop a sensor for the measurement of urea-solution concentration by an electric conductivity method. Considering experimental parameters were the material of electrode, two kinds of electric power(AC or DC), the distance between two electrodes, and the length of electrode. It was found that the AC electric power was more useful to measure the urea-solution concentration compared to DC, because it prevented an ionization of the urea-solution. The silver rod coated with Pt is the most useful electrode, tendency of which is similar to Pt rod, and the cost is more economic. We could also find out the optimum distance between two electrodes and the length of electrode was 10mm and 3mm, respectively.