• 한국자기학회지
• /
• 제5권5호
• /
• pp.720-725
• /
• 1995

Bi-substituted gadolinium iron garnet films were deposited on GGG(111) and NGG (111) substrates by irradiating KrF excimer laser onto targets having compositions of $Bi_{x}Gd_{3-x}Fe_{5}O_{12}$ ($2.0{\leq}x{\leq}3.0$) under substrate temperature of $580~620^{\circ}C$. Analysis on structure, composition and angle of Faraday rotation, ${\theta}_{F}$, were carried out. The composition, the structure and the magneto-optical properties of the obtained films were found to be strongly dependent both on the compositions of the targets and on the pressure of oxygen. Before annealing in air, all films showed ${\theta}_{F}{\geq}0$ at ${\lambda}=6328{\AA}$, while several films showed ${\theta}_{F}{\leq}0$ after the annealing. The highest value of Bi-substitution up to x = 1.76 with uniform composition was obtained.

• Management Science and Financial Engineering
• /
• 제7권2호
• /
• pp.73-90
• /
• 2001

This paper presents the reliability models for redundant systems composed of repairable components whose failure time and repair time distributions are phase-type. It is shown that the distribution of time to system failure is also phase-type. The dependency between components are considered and integrated into the model by the used of the rate adjustment factor. The phase-type representation is constructed for the system through algebraic operations on the parameters of components\` failure time and repair time distributions and the corresponding rate adjustment factors. Types of system structures considered are parallel, k-out-of-N system with load sharing scheme and standby system with operation priority.

• 공학논문집
• /
• 제3권1호
• /
• pp.97-106
• /
• 1998

본 논문에서는 높은 칩율을 갖는 WLL CDMA 시스템이 공간다이버시티 기능을 적용함으로써 다 경로 페이딩의 영향을 줄일 수 있음을 분석한다. 먼저, WLL $2.3GH_Z$ 대역의 실제환경에서 WLL 시스템의 성능을 평가하기 위해 WLL 시스템의 송.수신과정을 컴퓨터 모의실험 한 결과로 통해 역방향 링크의 용량을 도출하였다. 또한 전파환경, 링크버짓을 분석하였고 그 결과로 AWGN, 다중경로 페이딩 채널 구현을 위한 RCSU(RF Channel Simulator)를 제작하여 실험에 이용하였다. 이 RCSU는 다양한 환경에 있는 도시의 전파 환경을 모델링하도록 만들어졌다. 모의실험결과 페이딩의 심도가 깊을수록 다이버시티 이득은 증가됨을 알 수 있었다. $E_b/N_o$ 와 BER 곡선을 통해 다이버시티 적용 시스템이 WLL 시스템의 성능저하를 야기하는 다 경로 페이딩의 영향을 현저하게 줄일 수 있음을 보인다.

• Smart Structures and Systems
• /
• 제30권4호
• /
• pp.353-369
• /
• 2022

In this paper, a new sensor chip with frequency reconstruction range of 2.252 GHz ~ 2.450 GHz is designed and fabricated. On this basis, a self-designed "T-shaped" shell is added to overcome the disadvantage of uneven deformation of the traditional steel shell, and the range of the sensor chip is expanded to 0 kN ~ 96 kN. The liquid metal antenna is used to carry out a step-by-step loading test, and the relationship between the antenna resonance frequency and the pressure load is analyzed. The results show that there is a good linear relationship between the pressure load and the resonant frequency. Therefore, the liquid metal antenna can be regarded as a pressure sensor. The cyclic loading and unloading experiments of the sensor are carried out, and different loading rates are used to explore the influence on the performance of the sensor. The loading and unloading characteristic curves and the influence characteristic curves of loading rate are plotted. The experimental results show that the sensor has no residual deformation during the cycle of loading and unloading. Moreover, the influence of temperature on the performance of the sensor is studied, and the temperature correction formula is derived.

• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.789-798
• /
• 2013

형식인증시험을 통해 획득된 풍력발전기의 기계적 하중 데이터를 분석하기 위한 관련 프로그램 개발과 절차가 수행되었다. IEC 61400-13 규격을 기반으로 하는 측정 데이터에 대한 검증, 하중유형에 따른 분류, 시계열 및 통계 데이터 분석, 파워 스펙트럼 밀도함수 및 피로하중 스펙트럼 계산, 등가하중 계산 등의 절차가 본 프로그램을 통해 수행되었다. 수집된 데이터들이 피로하중을 산정하기에 충분한가를 판단하기 위해 정상전력생산의 경우에 대한 수집행렬을 구성하였다. 50 개의 하중 범위 분할 개수를 사용하는 우수집계법을 통해 피로하중 스펙트럼이 얻어지며, 사용된 재료에 따라 다르게 S-N 선도의 기울기를 적용하여 최종적으로 등가하중을 산출하였다. 모노파일 하부구조를 가지는 NREL 5MW 풍력발전기의 공탄성 시뮬레이션 데이터에 이용하여 위의 전반적인 절차를 수행하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.235-238
• /
• 2000

We have performed ab initio pseudopotential electronic structure calculations for various edge geometries of the (n,n) singlewall nanotube with on without applied fields. Among the systems studied, the one with the zigzag edge exposed by a slant out is found to be the most favorable for the emission due to the existence of unpaired dangling bond states around the Fermi level. The next favorable geometry is the capped nanotube where ${\pi}-bonding$ states localized at the cap and pointing to We tube axis direction occur at the Fermi level. A scaling rule of the induced field linean in the aspect ratio of the tube is also obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.277-281
• /
• 2004

The following paper proposes the new design of digital sine wave generator which allows users to define the phase shift of the out put sinewave according to user's demands. This new sinewave generator will have 2 outputs, cos(${\omega}_0n$) and cos(${\omega}_0n$+${\phi}$) The design of the new system starts from the construction of discrete time system with impulse response as cos(${\omega}_0n$) in a pair of conjugate complex poles and a pair of zeros at the origin and the real axis. If users want to make a phase shift of sign wave, users can change the position of zero at the real axis. The results of the experiment have shown that the new design of sign wave generator has generated sine wave with the correct phase shift according to the theory.

• 정보저장시스템학회논문집
• /
• 제10권1호
• /
• pp.14-18
• /
• 2014

Adhesion between carbon nanotube (CNT) arrays is measured and characterized for number of different contact areas. The CNT arrays are directly grown on an electrostatic microactuator, and they make contact with each other during the growth process. The pull-out force is precisely applied by the microactuator while the contact status is identified by measuring electrical resistance between the CNT arrays. We have designed different contact areas of 1000, 6000, and 8500 ${\mu}m^2$ between the CNT arrays, and the corresponding adhesion increases from 0.9 to 3.7 ${\mu}N$ as the contact area increases.

• 한국전자파학회논문지
• /
• 제23권11호
• /
• pp.1239-1247
• /
• 2012

본 논문에서는 GaN HEMT 소자를 이용한 X-대역 반도체 전력 증폭 장치(SSPA)의 설계 및 제작에 대하여 논의한다. 반도체 전력 증폭 장치는 안정적인 전원을 공급해 주는 전원공급기, 통신과 내부 모듈을 제어하기 위한 제어부, RF 신호를 증폭하기 위한 RF부로 구성된다. 특히, RF부를 구성하는 능동 소자로 TriQuint사의 GaN HEMT Bare 소자를 이용하였다. RF부는 초단, 드라이브 단, 메인 출력 단으로 구성되어 있으며, 각 앰프는 입 출력 정합을 통하여 구현하였다. 제작된 반도체 전력 증폭 장치는 X-대역(500 MHz 대역폭)에서 duty 26 %, 최장 펄스 100 us 조건에서 300 W 이상의 출력을 얻을 수 있었으며, 향후 선박용 레이더 시스템에 적용할 예정이다.

• 경영과정보연구
• /
• 제5권
• /
• pp.33-59
• /
• 2000

Problem definition is as important as problem solving in decision making. Decision makers, however, tend to see problem partly or to define it unclearly. The researchers on decision making tend to lay a focus only on the Process of solving the given problem. This dissertation empirically studied the Problem diagnosis and definition in the decision making process. This study developed three kinds of DSS(Decision Support System) for the research and analyzed the effectiveness of the problem diagnosis and definition using DSS developed in this study. The three kinds of DSS are K-T(Kennel and Tregoe) DSS which is a method of table-styled information Presentation, and F-N(Fact-Net) DSS and C-E(Cause and Effect) DSS which are methods of graphic-styled information presentation. The empirical study was conducted twice; the pilot test and the main test. The samples of experiment are 218 students for the pilot test and 259 students for the main test. The author used K-T DSS and F-N DSS for the pilot test, and the revised K-T DSS and C-E DSS for the main test. A questionnaire survey method was included in the main test process The result of the study shows that the group using DSS in problem diagnosis and definition is more effective than the group not using DSS. A table-styled information presentation DSS, K-T, turns out more effective than a graphic-styled information presentation DSS, F-N, K-T DSS and C-E DSS showed no significant differences in the effectiveness in the main test. These results indicate that the use of DSS in the stage of problem diagnosis and definition is very effective and the methods and types of system design are a significant factors for DSS development.