• 분석과학
• /
• 제8권1호
• /
• pp.33-40
• /
• 1995

미량의 hydroxide 이온은 Tetra-n-Butyl Ammonium(TBAC)에 의해 수액상에서 유기상으로 추출될 수 있다. 일차 알코올류, 특히 다이올류의 적은 양을 첨가하면 상전이 촉매계의 거동이 급격히 변하고 과량의 염기를 유기상에서 발견할 수 있다. 정량 측정은 유기상에서 1차, 2차 알콕사이드와 다이올 음이온들의 추출한 양에 대해 행하였다. 한편, 일차 알코올류와 벤질 알코올의 추출에 대한 선택상수들은 수액상과 유기상에서 $Q^+RO^-$($Q^+$ : quaternary 양이온, $RO^-$ : 알콕사이드 이온)와 $Q^+Cl^-$과 같은 이온쌍들의 평형상수와 이 두 상간의 분배계수로 분리되었다. 따라서 $Q^+RO^-$의 선택성에 대한 전제 특성을 본 연구결과에서 언급된 여러 상수들에 대하여 자유에너지에 상응하는 값들을 사용해서 더욱 상세하게 논하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.389-405
• /
• 2014

Outdated Channel State Information (CSI) was proved to have negative effect on performance in two-way relay networks. The diversity order of widely used opportunistic relay selection (ORS) was degraded to unity in networks with outdated CSI. This paper proposed a multiple relay selection scheme for amplify-and-forward (AF) based two-way relay networks (TWRN) with outdated CSI. In this scheme, two sources exchange information through more than one relays. We firstly select N best relays out of all candidate relays with respect to signal-noise ratio (SNR). Then, the ratios of the SNRs on the rest of the candidate relays to that of the Nth highest SNR are tested against a normalized threshold ${\mu}{\in}[0,1]$, and only those relays passing this test are selected in addition to the N best relays. Expressions of outage probability, average bit error rate (BER) and ergodic channel capacity were obtained in closed-form for the proposed scheme. Numerical results and Simulations verified our theoretical analyses, and showed that the proposed scheme had significant gains comparing with conventional ORS.

• Journal of Korean Neurosurgical Society
• /
• 제59권5호
• /
• pp.425-429
• /
• 2016

Objective : Rod-screw fixation systems are widely used for spinal instrumentation. Although many biomechanical studies on rod-screw systems have been carried out, but the effects of rod contouring on the construct strength is still not very well defined in the literature. This work examines the mechanical impact of straight, $20^{\circ}$ kyphotic, and $20^{\circ}$ lordotic rod contouring on rod-screw fixation systems, by forming a corpectomy model. Methods : The corpectomy groups were prepared using ultra-high molecular weight polyethylene samples. Non-destructive loads were applied during flexion/extension and torsion testing. Spine-loading conditions were simulated by load subjections of 100 N with a velocity of $5mm\;min^{-1}$, to ensure 8.4-Nm moment. For torsional loading, the corpectomy models were subjected to rotational displacement of $0.5^{\circ}\;s^{-1}$ to an end point of $5.0^{\circ}$, in a torsion testing machine. Results : Under both flexion and extension loading conditions the stiffness values for the lordotic rod-screw system were the highest. Under torsional loading conditions, the lordotic rod-screw system exhibited the highest torsional rigidity. Conclusion : We concluded that the lordotic rod-screw system was the most rigid among the systems tested and the risk of rod and screw failure is much higher in the kyphotic rod-screw systems. Further biomechanical studies should be attempted to compare between different rod kyphotic angles to minimize the kyphotic rod failure rate and to offer a more stable and rigid rod-screw construct models for surgical application in the kyphotic vertebrae.

• 설비공학논문집
• /
• 제28권12호
• /
• pp.509-514
• /
• 2016

From the point of view to prevent airborne infection-related diseases such as H1N1, SARS, and MERS, an actual application of air cleaning and purification systems including technologies like UVGI has become increasingly important. Recently, an air purification system using REME (Reflective Electro Magnetic Energy) developed in the U.S. is applied for indoor air purification and sterilization technology to counteract the outbreak of new airborne infections. In this study, an air sterilization performance experiment using REME was carried out. The results verified that air sterilization performance in the case of installing a REME system in a medical center was 31%, namely the number of floating bacteria decreased by 31% after only a five-day operation. In addition, the number of culture collections in the REME operating air conditioning systems using nonpathogenic Geobacillus stearothemophilus as a biological indicator decreased maximally to 67%. A field application of REME technology will be useful to prevent airborne infection-related diseases, especially in response to public health crises due to the advent of emerging diseases.

• 생물환경조절학회지
• /
• 제18권4호
• /
• pp.363-369
• /
• 2009

본 시험은 순환식 수경재배시 배양액조성이 배양액 내 다량원소 농도의 변화 및 오이 생육에 미치는 영향을 구명하고자 수행되었다. 네 가지 배양액조성, 즉 일본 원시 배양액, 야마자키 오이 배양액, PBG 오이 순환식 배양액 및 원예원 오이 순환식 배양액이 급액되는 순환식 펄라이트 수경재배시스템에서 오이('조은백다다기' 품종)를 재배하였다. 네 가지 배양액조성 처리구 모두에서 순환배양액내 $NO_{3^-}N$, $Ca^{2+}$, $Mg^{2+}$ 및 $SO_{4^-}S$의 농도는 정식후일수가 진전됨에 따라 증가되었고 $NH_{4^-}N$의 농도는 점차적으로 감소되었다. 순환배양액내 $PO_{4^-}P$와 $K^+$의 농도는 과실수확 개시기부터 과실수확 최성기까지 계속적으로 감소되었다. 순환배양액내 $NO_{3^-}N$, $NH_{4^-}N$ 및 $Ca^{2+}$의 농도는 배양액조성 간에 큰 차이를 나타내지 않았다. 그러나, 야마자키 배양액을 이용한 오이 순환식 수경재배 시에 다른 세 가지 배양액조성에 비하여 $PO_{4^-}P$와 K^+$의 농도는 가장 낮아지고 $Mg^{2+}$와 $SO_4^{2-}$의 농도는 가장 높아지는 결과를 나타내었다. 엽수를 제외한 작물 생육은 배양액조성 간에 유의한 차이를 보이지 않았다. 그러나, 오이의 과수와 과실수량은 야마자키 배양액조성 처리에서 가장 적었는데, 그것은 순환배양액내 $PO_{4^-}P$와 $K^+$의 농도가 낮게 유지되었기 때문이다.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.1-11
• /
• 2002

Flow of fluid has been studied in various fields of fluid engineering. To hydraulic engineers, the unsteady flow such as pulsation and liquid hammering in pipes has been considered as a serious trouble. So we are supposed to approach the formalized mathematical model by using more exact momentum equation for fluid transmission lines. Most of recent studies fur pipe line have been studied without considerations of variation of viscosity and temperature, which are the main factors of pressure loss causing the friction of fluid inside pipe line. Frequency response experiments are carried out with use of a rotary sinusoidal flow generator to investigate wave equation take into account viscosity and temperature. But we observed that measured value of gains are reduced as temperature increased. And it was respectively observed that the measured value of gains are reduced and line width of gain is broadened out, when temperature was high in the same condition. As we confessed, pressure loss and phase delay are closely related with the length, diameter and temperature of pipe line. In addition, they are the most important factors, when we decide the momentum energy of working fluid.

• 전자공학회논문지 IE
• /
• 제48권1호
• /
• pp.1-6
• /
• 2011

본 연구에서는 스테이터 구조에 의한 마그네틱 베어링의 전자장해석을 수행하였으며 AMB 시스템의 설계 기준을 얻기 위하여 3가지 방식의 구조에서 전기적 특성을 구하였다. FEM 기법을 이용하여 AMB의 3가지 방식을 시뮬레이션한 결과, 1, 2, 그리고 3번 방식은 N극에서 S극으로 많은 자속선 벡터가 이동하는 것으로 나타났으며, 이 자속선들은 로타로 전달되고 있다. 이 선들은 로타가 회전하는 것을 도와주고 있다. 따라서, 이러한 전기적 특성 자료는 마그네틱 베어링 설계자료로 이용되고, 설계 기준을 만드는데 도움이 될 것이다.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.285-296
• /
• 2011

Spar platforms have several advantages for deploying wind turbines in offshore for depth beyond 120 m. The merit of spar platform is large range of topside payloads, favourable motions compared to other floating structures and minimum hull/deck interface. The main objective of this paper is to present the response analysis of the slack moored spar platform supporting 5MW wind turbine with bottom keel plates in regular and random waves, studied experimentally and numerically. A 1:100 scale model of the spar with sparD, sparCD and sparSD configuration was studied in the wave basin ($30{\times}30{\times}3m$) in Ocean engineering department in IIT Madras. In present study the effect of wind loading, blade dynamics and control, and tower elasticity are not considered. This paper presents the details of the studies carried out on a 16 m diameter and 100 m long spar buoy supporting a 90 m tall 5 MW wind turbine with 3600 kN weight of Nacelle and Rotor and 3500 kN weight of tower. The weight of the ballast and the draft of the spar are adjusted in such a way to keep the centre of gravity below the centre of buoyancy. The mooring lines are divided into four groups, each of which has four lines. The studies were carried out in regular and random waves. The operational significant wave height of 2.5 m and 10 s wave period and survival significant wave height of 6 m and 18 s wave period in 300 m water depth are considered. The wind speed corresponding to the operational wave height is about 22 knots and this wind speed is considered to be operating wind speed for turbines. The heave and surge accelerations at the top of spar platform were measured and are used for calculating the response. The geometric modeling of spar was carried out using Multisurf and this was directly exported to WAMIT for subsequent hydrodynamic and mooring system analysis. The numerical results were compared with experimental results and the comparison was found to be good. Parametric study was carried out to find out the effect of shape, size and spacing of keel plate and from the results obtained from present work ,it is recommended to use circular keel plate instead of square plate.

• Industrial Engineering and Management Systems
• /
• 제7권1호
• /
• pp.66-77
• /
• 2008

The existence of Internet revolutionized the computer and communications world. With the rising demand for accessing the Internet, the mobile technology has incorporated the use of Internet in mobile phones. Wireless Application Protocol (WAP) has combined two of the widest utilized technology today: mobile phones and Internet. This study aims to assess the existing WAP pages offered by the top service providers in the Philippines through usability testing experiments. The paper also aims to identify existing problems in WAP interface by focusing on the errors committed by the users. From the usability study, it was found out that common usability problems are wrong selection of links, unclear grouping of categories, wrong feedback, and redundant links. The type of service provider used is significant in determining the performance of users while experience in accessing WAP is insignificant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.917-921
• /
• 2004

Principle of mailing list was distributed messages to all subscribers in one time. But mailing list operation has constructed a network traffic problem. Because mailing list manager distributed mails without concentrate on subscriber network. If our network has many of subscribers, there will be redundant data in traffic channel. Submailing list has purpose to reduce problems. Analyses of mailing list characteristic in electronic mail were a feature of submailing list system, which manage by human hand (Network Administrator). That will cause trouble for network traffic if Network Administrator could not seek for mailing list characteristic from e-mails in due time. This article will present ideas and recognize methodology for automatic working in submailing list system. Recognize step begin with capture process, which use to trap e-mail information from transfer channel. Next process is preparing raw data into recognition format. Then the third one is recognize part and find out confidential factor. The last process is make decision and determine which electronic mail has properties of mailing list characteristic. Afterward deliver result to submailing list for carry on.