• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.5785-5804
• /
• 2019

The information of localization is a fundamental requirement in wireless sensor network (WSN). The method of distance vector-hop (DV-Hop), a range-free localization algorithm, can locate the ordinary nodes by utilizing the connectivity and multi-hop transmission. However, the error of the estimated distance between the beacon nodes and ordinary nodes is too large. In order to enhance the positioning precision of DV-Hop, fast triangle flip bat algorithm, which is based on curve strategy and rank transformation (FTBA-TCR) is proposed. The rank is introduced to directly select individuals in the population of each generation, which arranges all individuals according to their merits and a threshold is set to get the better solution. To test the algorithm performance, the CEC2013 test suite is used to check out the algorithm's performance. Meanwhile, there are four other algorithms are compared with the proposed algorithm. The results show that our algorithm is greater than other algorithms. And this algorithm is used to enhance the performance of DV-Hop algorithm. The results show that the proposed algorithm receives the lower average localization error and the best performance by comparing with the other algorithms.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권5호
• /
• pp.2499-2522
• /
• 2017

Multi-hop networks are a low-setup-cost solution for enlarging an area of network coverage through multi-hop routing. Carrier sense multiple access with collision avoidance (CSMA/CA) is frequently used in multi-hop networks. Multi-hop networks face multiple problems, such as a rise in contention for the medium, and packet loss under heavy-load, saturated conditions, which consumes more bandwidth due to re-transmissions. The number of re-transmissions carried out in a multi-hop network plays a major role in the achievable quality of service (QoS). This paper presents a statistical, analytical model for the end-to-end delay of contention-based medium access control (MAC) strategies. These strategies schedule a packet before performing the back-off contention for both differentiated heterogeneous data and homogeneous data under saturation conditions. The analytical model is an application of Markov chain theory and queuing theory. The M/M/1 model is used to derive access queue waiting times, and an absorbing Markov chain is used to determine the expected number of re-transmissions in a multi-hop scenario. This is then used to calculate the expected end-to-end delay. The prediction by the proposed model is compared to the simulation results, and shows close correlation for the different test cases with different arrival rates.

• Journal of Information Processing Systems
• /
• 제16권1호
• /
• pp.201-209
• /
• 2020

The graph data structure is popular because it can intuitively represent real-world knowledge. Graph databases have attracted attention in academia and industry because they can be used to maintain graph data and allow users to mine knowledge. Mining reachability relationships between two nodes in a graph, termed reachability query processing, is an important functionality of graph databases. Online traversals, such as the breadth-first and depth-first search, are inefficient in processing reachability queries when dealing with large-scale graphs. Labeling schemes have been proposed to overcome these disadvantages. The state-of-the-art is the 2-hop labeling scheme: each node has in and out labels containing reachable node IDs as integers. Unfortunately, existing 2-hop labeling schemes generate huge 2-hop label sizes because they only consider local features, such as degrees. In this paper, we propose a more efficient 2-hop label size reduction approach. We consider the topological sort index, which is a global feature. A linear combination is suggested for utilizing both local and global features. We conduct experiments over real-world and synthetic directed acyclic graph datasets and show that the proposed approach generates smaller labels than existing approaches.

• Journal of Information Processing Systems
• /
• 제13권6호
• /
• pp.1544-1553
• /
• 2017

The network coding mechanism has attracted much attention because of its advantage of enhanced network throughput which is a desirable characteristic especially in a multi-hop wireless network with limited link capacity such as the device-to-device (D2D) communication network of 5G. COPE proposes to use the XOR-based network coding in the two-hop wireless network topology. For multi-hop wireless networks, the Distributed Coding-Aware Routing (DCAR) mechanism was proposed, in which the coding conditions for two flows intersecting at an intermediate node are defined and the routing metric to improve the coding opportunity by preferring those routes with longer queues is designed. Because the routes with longer queues may increase the delay, DCAR is inefficient in delivering real-time multimedia traffic flows. In this paper, we propose a network coding-aware routing protocol for multi-hop wireless networks that enhances DCAR by considering traffic load distribution and link quality. From this, we can achieve higher network throughput and lower end-to-end delay at the same time for the proper delivery of time-sensitive data flow. The Qualnet-based simulation results show that our proposed scheme outperforms DCAR in terms of throughput and delay.

• 한국전문물리치료학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2017

Background: The multiple hop test is an active performance test that has been commonly used to assess individuals with functional ankle instability. Previous studies have suggested that insufficiency of dynamic postural stability and passive stability during dynamic activities can have an influence on performance in the multiple hop test. However, no study has investigated the effects of dynamic postural stability training and ankle bracing on multiple hop test performance in individuals with functional ankle instability. Objects: The purpose of this study was to compare the immediate effects of dynamic postural stability training versus ankle bracing in the performance of the multiple hop test for participants with functional ankle instability. Methods: Twenty-nine participants with functional ankle instability who scored below 24 in the Cumberland Ankle Instability Tool were selected. The participants were randomly divided into two groups: a dynamic postural stability training group (n1=14) and an ankle bracing control group ($n_2=15$). The multiple hop tests were performed before and after applying each intervention. Dynamic postural stability training was performed using visual-feedback-based balance-training equipment; participants in this group were asked to perform a heel raise in a standing position while watching the centering of their forefoot pressure to prevent excessive ankle inversion. Ankle bracing was applied in the control group. Results: When comparing the pre- and post-intervention period for both groups, both methods significantly improved the results of the multiple hop test (p<.05). However, no significant differences were shown between the dynamic postural stability training and ankle bracing groups (p>.05). Conclusion: Both dynamic postural stability training and ankle bracing showed significant improvement (2.85 seconds and 2.05 seconds, respectively) in test performance. Further study is needed to determine the long-term effects of dynamic postural stability training and to determine whether insufficient dynamic postural stability is a causative factor for functional ankle instability.

• 전자공학회논문지CI
• /
• 제45권6호
• /
• pp.114-121
• /
• 2008

다중 경로 라우팅 방식은 유선 네트워크에서 주로 연구되었으며 유선 네트워크에서의 엔드 시스템들 사이의 전송률을 증가시키고 load balancing을 유지하는데 효율적이다. 하지만 이런 장점들은 무선 다중 흡 네트워크에서는 그대로 적용되지는 않는다. 그 이유는 무선 네트워크에서 여러 개의 다중 트래픽 경로가 서로 간섭을 줄 수 있기 때문이다. 본 논문에서는 무선 다중 홉 네트워크에서 동작하는 "클러스터 기반의 다중 경로 라우팅"이라고 하는 새로운 다중 경로 라우팅 방식을 제안하였다. 이 라우팅 방식에서는 홉 기반의 라우팅 방식을 확장하여 클러스터에서 클러스터로의 라우팅 방식을 사용한다. 클러스터 기반의 네트워크에서 각 클러스터들은 서로 독립적으로 통신을 진행할 수 있고 또 서로 다른 클러스터들과의 신호간섭을 피할 수 있게 된다. 본 논문에서는 이러한 클러스터의 특징을 이용하여 소스 노드와 목적지 노드 사이에 서로 간섭이 없는 다중경로 방식을 연구하였으며 또한 제안된 방식을 적용할 경우에 엔드 시스템들 사이에 전송률이 증가하는 것을 시뮬레이션을 통하여 알아보았다.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.481-504
• /
• 2010

Wireless smart sensor networks (WSSNs) have been proposed by a number of researchers to evaluate the current condition of civil infrastructure, offering improved understanding of dynamic response through dense instrumentation. As focus moves from laboratory testing to full-scale implementation, the need for multi-hop communication to address issues associated with the large size of civil infrastructure and their limited radio power has become apparent. Multi-hop communication protocols allow sensors to cooperate to reliably deliver data between nodes outside of direct communication range. However, application specific requirements, such as high sampling rates, vast amounts of data to be collected, precise internodal synchronization, and reliable communication, are quite challenging to achieve with generic multi-hop communication protocols. This paper proposes two complementary reliable multi-hop communication solutions for monitoring of civil infrastructure. In the first approach, termed herein General Purpose Multi-hop (GPMH), the wide variety of communication patterns involved in structural health monitoring, particularly in decentralized implementations, are acknowledged to develop a flexible and adaptable any-to-any communication protocol. In the second approach, termed herein Single-Sink Multi-hop (SSMH), an efficient many-to-one protocol utilizing all available RF channels is designed to minimize the time required to collect the large amounts of data generated by dense arrays of sensor nodes. Both protocols adopt the Ad-hoc On-demand Distance Vector (AODV) routing protocol, which provides any-to-any routing and multi-cast capability, and supports a broad range of communication patterns. The proposed implementations refine the routing metric by considering the stability of links, exclude functionality unnecessary in mostly-static WSSNs, and integrate a reliable communication layer with the AODV protocol. These customizations have resulted in robust realizations of multi-hop reliable communication that meet the demands of structural health monitoring.

• 생약학회지
• /
• 제49권3호
• /
• pp.189-202
• /
• 2018

Hop cones (Humuli Strobili) are the female inflorescences of hop plants (Humulus lupulus L.) belonging to the family Cannabaceae. They have been used as herbal remedies to treat mood and sleep disturbances, and mainly to add as a bittering ingredient in brewing process. Considerable interests on pharmacological and biological activities of hop cones have been focused on their major constituents, namely, phloroglucinols (humulone, lupulone), terpenes (myrcene, humulene), and prenylated flavonoids (xanthohumol, isoxanthohumol, 6-prenylnaringenin, and 8-prenylnaringenin). The present review describes and discusses biological activity profiles of these major compounds in the hop cones.

• International Journal of Contents
• /
• 제8권2호
• /
• pp.13-18
• /
• 2012

In wireless sensor networks, an energy efficient data gathering scheme is one of core technologies to process a query. The cluster-based data gathering methods minimize the energy consumption of sensor nodes by maximizing the efficiency of data aggregation. However, since the existing clustering methods consider only uniform network environments, they are not suitable for the real world applications that sensor nodes can be distributed unevenly. To solve such a problem, we propose a balanced multi-hop clustering scheme in non-uniform wireless sensor networks. The proposed scheme constructs a cluster based on the logical distance to the cluster head using a min-distance hop count. To show the superiority of our proposed scheme, we compare it with the existing clustering schemes in sensor networks. Our experimental results show that our proposed scheme prolongs about 48% lifetime over the existing methods on average.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.800-818
• /
• 2013

Supporting video streaming over multi-hop wireless networks is particularly challenging due to the time-varying and error-prone characteristics of the wireless channel. In this paper, we propose a joint optimization scheme for video streaming over multi-hop wireless networks. Our coding scheme, called Joint Source/Network Coding (JSNC), combines source coding and network coding to maximize the video quality under the limited wireless resources and coding constraints. JSNC segments the streaming data into generations at the source node and exploits the intra-session coding on both the source and the intermediate nodes. The size of the generation and the level of redundancy influence the streaming performance significantly and need to be determined carefully. We formulate the problem as an optimization problem with the objective of minimizing the end-to-end distortion by jointly considering the generation size and the coding redundancy. The simulation results demonstrate that, with the appropriate generation size and coding redundancy, the JSNC scheme can achieve an optimal performance for video streaming over multi-hop wireless networks.