• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.69-84
• /
• 2007

Producing printing plate is essential progress to do offset printing. In this Film-less period, the more PS plate becomes extinct, the more the age of the Plate-Making of Exposure declines the place to stand. To do offset printing, the CTP (Computer to Plate) is taking a place of PS plate that covers speed, quality and economical problems. The biggest advantage of using CTP is that laser directly goes to the plate, thus there are no dust from the Plate-Making of Exposure. It is also theoretically able to print $200lpi{\sim}300lpi$ as well as print 1751pi, because it has over 2400dpi resolution. The high quality printing could be available inside of the country, if printing machine keeps the optimum condition in offset printing. The CTP has many advantages, however there is a difficulty for the operators to preserve the equipment. The actual circumstance is that they cannot make a decision about how many dots need to be generated, and also it is necessary to know how to establish the setup at RIP on CTP to make the optimum condition output. If offset printing machine keeps the optimum condition, it would be able to print up to high quality printing however it is hard to comment what is the optimum condition for the printing machine. Anyone could say easy subjectively that machine is in the optimum condition, however it is objectively hard to estimate by number. In this research GATF / Plate Test target used to analyze the image and to make numerical value of the optimum condition of the CTP. It also used GATF / The sheep fed test printing 5.0 to know the density of the color representation, dot gain and gray balance for the optimum condition of the print machine. The purpose of this research is to represent the ISO 12647-2 which is the international standard with domestic printing equipments.

• Korean Journal of Community Nutrition
• /
• v.22 no.2
• /
• pp.103-114
• /
• 2017

Objectives: This study aims to investigate the married female immigrants' experience on Korean dietary life adaptation, especially identifying the symbolic meaning and nature of experiences. Methods: This study was conducted with six married female immigrants through an analysis of the qualitative materials which consisted of in-depth interviews, field notes and materials. Data was analyzed using Giorgi's phenomenological research methods. Results: The results were deduced as 116 significant statements, 17 formulated meanings (sub-theme), and 6 theme clusters. Six theme clusters comprised of lack of preliminary knowledge and information, conflict and support in relationships, Korean food culture which is different from homeland, adaptation attitudes of Korean food culture according to situation, sharing of homeland food culture, and practical difficulty and expectative service. The participants started Korean life in the dark about Korea and Korean food culture, so they were subjected to trial and error. The conflict between Korean mother-in-law and foreign daughter-in-law came from lack of consideration of daughter-in-law's cultural background. Some participants were hurt because of misunderstanding and nitpicking. They were learning about cooking method, ingredient, seasoning, table setting and manner. Some participants integrated Korean food culture and their homeland food culture. Some of them assimilated with Korean food culture. One of them maintained homeland food culture. The participants who adapted Korean food culture well could share homeland food amicably. They sometimes didn't apply the services which were offered by the government, because the services did not fit their needs. Some of them didn't know the usage route of the services or information. They had resistance about home teaching and it showed that outreach service was not always effective. Conclusions: This study suggested that it is necessary to develop a practical support plan which covers married female immigrants' real needs and system improvement measures.

• Journal of the Korean Society for Library and Information Science
• /
• v.29
• /
• pp.345-382
• /
• 1995

The type printing of first Ch'ing dynasty term in China is worthy to be studied because the type printing during that period included metal type, wood type, and clay type as well as the development phase was similar to Chosun dynasty culturally and technologically. This paper studied typography during the first Ch'ing dynasty term, including Shunzhi(1662-1722), Yongaheng(1723-1735), Qianlong(1736-1795), Jiaqing(1796­1820) period. The main results of the study is as follows. 1. The main body of type printing was bookstore, lecture-hall, and individual as well as the royal court that is the central government. 2. The content of type edition covers classics, history, philosophy, and literary works. Specifically, even though Wuyingdienjuzhenban series is excluded, the content includs study of the classics, class of the history, class of the philosophy, literature works that include collection works and novel and government official bulletin. 3. The printing technique of bronze type was very popular In Beijing. Jiangsu, and Taiwan. It's scale and production technique was more elaborate than in Ming dynasty. 4. Wood type was very popular in Beijing, Jiangsu, Zhejiang, Anhui, Sichuan, and Fujian. In addition to wood type, chinese ware type was applied to book printing in Shandong. However, most of them were wood type and they were used after Qianlong period. 5. The production technique of type was skilled enough to present the fine view of a style of type. The typesetting technique was improved as much as woodblock printing. With regard to the making technology of Chinese ink, the light and darkness of chinese ink was not even sometimes. But, the technology was improved significantly when comparing with the failure experience of printing that chinese ink was not developed in early type invention. 6. In case that the book was printed in bookstore with the intention of profit and the number of book was large, the proofreading attitude was rough. However, overally, it was made correction carefully applying the various methods of proofreading. 7. The support of government made a great contribution in the area of all printing technology, including production, typesetting, and brushing of type.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.291-297
• /
• 2015

The basic idea of IoT(Internet of Things) is interconnection and cooperation with a variety of things in real life such as Radio-Frequency Identification(RFID) tags, sensors, mobile phone, etc, through internet. IoT technologies which applied to these fields consist of sensor network technology and middleware, application. Currently, IoT technology is applied to various fields such as health care, home care, automotive, transportation, construction, agriculture, environment, food, and etc, based on its technologies. This paper focuses on discussion of the IoT development trend in game field. In order to achieve this purpose, first, the IoT technologies for game development based on sensor network technology and middleware, application is mentioned. Second, covers serious game and gamification that is expected to be a growing that is expected to be a growing, by applying IoT technologies to the game field. It can help for game developers by using IoT technologies.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.336-343
• /
• 1995

The Self Tuning Regulator(STR) method which is an approach of adaptive control theory, is ap-plied to design the fully automatic power controller of the nonlinear reactor model. The adaptive control represent a proper approach to design the suboptimal controller for nonlinear, time-varying stochastic systems. The control system is based on a third­order linear model with unknown, time-varying parameters. The updating of the parameter estimates is achieved by the recursive extended least square method with a variable forgetting factor. Based on the estimated parameters, the output (average coolant temperature) is predicted one-step ahead. And then, a weighted one-step ahead controller is designed so that the difference between the output and the desired output is minimized and the variation of the control rod position is small. Also, an integral action is added in order to remove the steady­state error. A nonlinear M plant model was used to simulate the proposed controller of reactor power which covers a wide operating range. From the simulation result, the performances of this controller for ramp input (increase or decrease) are proved to be successful. However, for step input this controller leaves something to be desired.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.35-41
• /
• 2015

Recoil system for 40mm automatic gun is a device developed to absorb the shock of explosion. It is impossible to conduct pinpoint strike due to recoil if very high explosive shock, which is generated when an automatic gun fires shells, can't be absorbed. This study covers development and verification of analysis model for recoil system by utilizing a multi-domain software. The research process is as in the following. First, an analysis model is developed to verify damping characteristics through understanding of design intention. Second, environment which is identical to a field test is set up on analysis tool after putting explosive force that is measured through the test into the analysis model. Finally, the analysis model for recoil system using the multi-domain software is verified if it has effectiveness with a comparison between internal pressure of the recoil system along with displacement of gun barrel and the field test result.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.8
• /
• pp.45-49
• /
• 2015

Using 2D numerical analysis that covers the largest section of the dam body, a process is generally performed when evaluating its stability against seepage. The quantity of seepage is first obtained by assuming that its bottom topography is in the simple form of a rectangle, it is then calculated by reflecting its sectional shape during this process of analyzing the seepage quantity. Considering that various forms of dams are being constructed on various types of ground, thanks to more recent technological advances, it is judged more appropriate to draw a conclusion by means of the results on reflecting the realistic shape and topographical conditions of the dam body through 3D numerical analysis. Therefore, this study intends to present a method designed to carry out safety management by evaluating the correct quantity of water leakage that passes only through the dam body, having excluded other factors that include the amount of rainfall through the 3D FEM analysis.

• Korea and Global Affairs
• /
• v.2 no.1
• /
• pp.137-162
• /
• 2018

This paper covers the issues including geopolitical effects of sea power on sea space in East Asia and its nature in a perspective of the past and the present. This paper analyzes the significance of Sea Power which is emphasized in Mahan's Theory of Insular Dominance and grasps the geopolitical nature of Sea Power. Along with this awareness, it deals with the problem of designated strategic phenomenon that is spreading to the Pacific Ocean with the concept of the Island Chain in China in the 21st century. Around the turn of 20th century, Japan materialized the policy of Greater East Asia Co-prosperity Sphere which was planned to expand power sphere in sea space in the East Asia based on sea power and China took shape of the concept of Island Chain in the 21st century, which has divided sea space in East Asia. Under the circumstance that China's policy of island chain faced the resistance from countries in the East Asia as well as the USA, the question about whether Korea's policy of depending on sea power is valuable even in the 21st century has been raised.

• Journal of Global Scholars of Marketing Science
• /
• v.11
• /
• pp.129-146
• /
• 2003

This study explores whether a NBD type of model can be applied to characterize the underlying frequency distribution of online consumer's visit behavior. In this study, the following two research questions are addressed: (1) How can we characterize the underlying distribution pattern(s) of the number of repeat i i visits to a site? (2) How can consumer's Internet usages and his/her demographics affect the average number of visits to the site? Through the empirical investigation, this study found that NBD models are directly applicable to characterize the underlying distribution of visit frequency on the Internet. Furthermore, this study addresses some managerial implications for understanding how site visits are determined. Especially this study highlights the relationship between repeated visits and the visitors' Internet Usages and demographics. The proposed models are estimated and validated by online panel data that covers more than 1000 different sites and has 800,000 observations.

• Journal of architectural history
• /
• v.3 no.1
• /
• pp.123-142
• /
• 1994

This paper is a part of "A Case Study on The Dwellings and Settlement of Korean Immigrants to North-Eastern Province of China". Among various subjects from the study, this paper covers with the spaces and life style in the dwellings of Korean Immigrants. The purpose of this paper is to discribe how their dwelling culture has been moved and changed to a new environment. One rural village of Korean Immigrants named "Ch'ang-ts'ai" in Yen-pien Province was selected where we investigated more than 110 households. From the formal interview, I collect the data on the family structure, family economic state, dwelling spaces and its use, and dwelling facillities and furniture. From informal interview with key informants, I analyze how they have changed their dwelling spaces and life style since they moved here. Based on the analysis of the data, I conclude that major features of their dwelling and life style has been moved from Korean penninsula, specially from 'Hamkyong' Province where their ancestor has lived. This features are summarized as follows: a. Dwelling spaces and its functions are simillar to typical dwelling type of Hamkyong Province. b. They use "Chong-ji" for both a cooking space and a major living space. c. They have a life style of sitting on the floor. d. Bedrooms are differentiated with male and female. e. Most of their dwelling facillities and furniture arc different from those of Chinese in the same province. Since they immigrated, there has been some social changes which could influence on making their dwelling culture. But they have preserved their cultural identity on their dwellings and life style. So I suggest that the dwelling culture of a society would be seldom changed by immigration, as long as they will be given similar conditions such as the independent ethnic community, the same ecosystem, and economical autonomy.