• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.46-46
• /
• 2009

The photoconductive $AgGaSe_2$(AGS) layers were grown by the hot wall epitaxy method. The AGS layer was confirmed to be the epitaxially grown layer along the <112> direction onto the GaAs(100) substrate. The band-gap variation as a function of temperature on AGS was well fitted by $E_8(T)=1.9501-8.37{\times}10^{-4}T^2/(T+224)$. The band-gap energy of AGS obtained at 293 K was determined to be 1.8111 eV.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.423-428
• /
• 2009

In FIR (Finite Impulse Response) filter applications, Nth-band FIR digital filters are known to be important due to their reduced computational requirements. The conventional methods for designing FIR filters use iterative approaches such as the well-known Parks-McClellan algorithm. The Parks-McClellan algorithm is also used to design Nth-band FIR digital filters after Mintzer's research. However, a disadvantage of the Parks-McClellan algorithm is that it needs a large amount of design time. This paper describes a direct design method for Nth-band FIR Filters using Chebyshev polynomials, which provides a reduced design time over indirect methods such as the Parks-McClellan algorithm. The response of the resulting filter is equi-ripple in passband. Our proposed method produces a passband response that is equi-ripple to within a minuscule error, comparable to that of Mintzer's design method which uses the Parks-McClellan algorithm.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.46-51
• /
• 2018

In this paper, a planar printed hybrid short/open-ended slot antenna with capacitive coupling feed strips is proposed for hepta-band mobile applications. The proposed antenna is comprised of a slotted ground plane on the top plane and two capacitive coupling feed strips with a chip inductor on the bottom plane. At the low frequency band, the short-ended long slot fed by strip 1 generates its half-wavelength resonance mode, whereas the T-shaped open ended slot fed by strip 2 generates its quarter-wavelength resonance mode for the high frequency band. The antenna provides a wide bandwidth covering GSM850/GSM900/DCS/PCS/UMTS/LTE2300/LTE2500 operation bands. Moreover, the antenna occupies a small volume of $15mm{\times}50mm{\times}1mm$. The operating principle of the proposed antenna and the simulation/measurement results are presented and discussed.

• 한국전기전자재료학회논문지
• /
• 제11권6호
• /
• pp.442-446
• /
• 1998

$\alpha$--sulfur single crystal which has orthorohmbic structure was grown using Bridgman method. The indirect optical energy band gap of this crystal are 2.65 and 2.82 eV at 10 and 300K, respectively. The wavelengths of photoluminecence(PL) peaks are 543 and 596 nm at 10k, By thermally stimulated current (TSC) method, two electron traps($D_1,D_2$) located at 0/23 and 0.43eV below the conduction band and a hole trap(A) located at 0.31 eV above the valence band are observed. PL mechanism of $\alpha$-sulfur single crystal is analyzed using the values of optical energy band gap at 10k two electron traps and a hole trap.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.223-227
• /
• 2016

The impact of optical receiver configuration on in-band crosstalk-induced penalty has been investigated in both theoretical and experimental analyses, for differential phase-shift keying (DPSK) and differential quadrature phase-shift keying (DQPSK) signals. Previously it has been shown that DPSK signals are ~6 dB more tolerant to in-band crosstalk than on-off keying (OOK) signals. However, we find that the tolerance difference between the two signals is reduced to ~3 dB when the decision threshold of the receiver is optimized to minimize the bit-error rate for each signal. Then we derive simple equations for the in-band crosstalk-induced penalty in DPSK and DQPSK signals with two different optical receiver configurations: balanced and single-ended direct-detection receivers. We confirm that the penalties obtained from our simple equations agree well with the measured results.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.208-211
• /
• 2008

Band-limited filtering will be applied to remove interference resulted from two neighbored channels in the transmission of KOMPSAT-5 X-Band image data. In that case, receiver in ground station should prepare righteous matched filter to avoid huge BER degradation depending on the matched filter of COTS receiver. As an effort to simulate the bandlimited filtering, test filter was designed and manufactured on the basis of main specification for output filter of KOMPSAT-5 satellite. Consequently, 1.8dB of BER degradation was measured at the output of test band-pass filter, but the degradation was downsized up to 0.4dB thanks to the adaptive matched filter of COTS receiver.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.263-267
• /
• 2009

Cylindrical monopole antenna is one of most promising candidates for multi-band applications such as PCS, WLAN, DMB, and UWB wireless services. In this research, we demonstrate that there exist two types of current distributions according to the exciting frequency in a double band cylindrical monopole antenna, in which double resonance is achieved by adjusting the coupling structure of the antenna base. The operating modes of current distributions are identified from CST software simulations, the standing wave mode in a lower band and the traveling wave mode in a higher band. Also it is noticed that the mode behavior is quite similar to a helical antenna, a standing-wave (resonance) mode and a traveling-wave (non-resonance) mode according to the electrical dimensions of antenna. The effective ranges for operating modes and design formulas of the double band antenna are derived from simulation and measured results.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.768-771
• /
• 2009

현재 음성인식에서 가장 많이 사용하고 있는 특징벡터는 MFCC(Mel-Frequency Cepstral Coefficients)이다. 그러나 MFCC도 잡음이 존재하는 환경에서는 인식 성능이 저하된다. 이러한 MFCC의 단점을 해결하기 위해 mel sub-band 스펙트럼 차감법과 신호대잡음비에 따른 에너지 압축을 이용하는 CMSBS(Compression and Mel Sub-Band Spectral subtraction) 방법을 사용한다. 본 논문에서는 CMSBS 방법 적용 시 음성이 발성되는 구간과 묵음 구간에서 mel sub-band 스펙트럼 차감법이 동일한 조건으로 이루어져 발생하는 중요한 음성정보의 손실을 보완하기 위하여 신호의 주기성을 이용하여 spectral flooring 파라미터를 변형하는 방법을 제안한다. 제안한 방법으로 실험을 한 결과 잡음이 거의 없는 음성신호에 대해서는 기존의 방법과 비슷한 인식률을 가지고, 잡음성분이 많을수록 변형된 mel sub-band 스펙트럼 차감법을 적용한 방법이 인식률에서 보다 높은 성능 향상을 가져왔다.

• Journal of Magnetics
• /
• 제11권3호
• /
• pp.139-142
• /
• 2006

We fabricated new one-dimensional magnetophotonic crystal (1D-MPC) utilizing the second and third photonic band gaps where localized modes existed. Structure of the 1D-MPC was $(Ta_{2}O_{5}/SiO_{2})_{5}/Bi:YIG/(SiO_{2}/Ta_{2}O_{5})_{5}$ with optical thicknesses of 3$\lambda$ /4 for $Ta_{2}O_{5} and $SiO_2$ dielectric layers and $\lambda$ /2 for Bi:YIG defect layer, where $\lambda$ is a wavelength of a localized mode in the second photonic band gap. Faraday rotation at the localized mode in the second photonic band gap was enhanced, which was confirmed by calculation using 4${\times}$4 matrix method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.169-170
• /
• 2006

A band pass filter for the V-band application with unique circuit and structure was designed and implemented using 2-metals, 3-BCB layers. In the mean while the effective electrical conductivity of metal layer was extracted and its value was $4{\times}10^7S/m$. The insertion loss of band pass filter at 60 GHz was 3.0 dB and group delay was below 0.1 ns.