• International Journal of Reliability and Applications
• /
• v.2 no.4
• /
• pp.253-262
• /
• 2001

A k-out-of-n standby system is considered where all of its components are s-independent and classified either working or cold standby connected with imperfect switches. The probability density function of the life length for this system is established in closed form, when the underlying components have constant failure rates. Also the reliability function of the system is derived. Finally, the reliability functions for one, two and three out of four systems are deduced for perfect or imperfect switches and identical or non-identical constant failure rates for working and standby components.

• Korean Journal of Community Nutrition
• /
• v.14 no.6
• /
• pp.789-797
• /
• 2009

In order to investigate the effects of frequent eating-out and breakfast skipping of working men on body mass index and nutrients intake status, working male adults aged 20 or over were selected (n = 1883) from the data of 2001 Korea national health and nutrition survey. The subjects were divided into 4 groups according to the eating-out frequency(high: once or more daily, low: less than once daily) and breakfast eating or not. Four groups were high eating-out with breakfast eating (n = 609), high eating-out with breakfast skipping (n = 192), low eating-out with breakfast eating (n = 877), and low eating-out with breakfast skipping (n = 205). High eating-out group showed higher body mass index (BMI) than low eating-out group, but the difference of BMI was disappeared when adjusted with age, residence region and family income. However high eating-out group in case of breakfast eating, compared with the low eating-out, showed higher intakes or densities of energy, fat, fat-energy% and higher ratio of energy-fat overintake, and also showed higher mean nutritional adequacy ratio and lower ratio of nutrients intake deficiency. Calcium, iron, vitamin A and C intakes were not affected by eating-out frequency, but were lowered by breakfast skipping. Breakfast skipping also decreased intake frequency of unprocessed cereals and increased those of ramyon and carbonated and alcoholic beverages. From the results frequent eating-out with breakfast eating caused increased intakes of energy and fat, but did not cause BMI increase. Breakfast skipping, but not eating-out, had negative influences on mineral and vitamin intakes. Accordingly good eating-out as well as breakfast eating should be exceedingly emphasized at nutrition education for the working males.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.332-342
• /
• 2017

Purpose: In this study, the lifetime distribution of a k-out-of-n system with heterogeneous components is suggested as Markov model, and the time-to-failure (TTF) distribution of each component is considered as phase-type distribution (PHD). Furthermore, based on the model, a redundancy allocation problem with a mix of components (RAPMC) is proposed. Methods: The lifetime distribution model for the system is formulated by the structured Markov chain. From the model, the various information on the system lifetime can be ascertained by the matrix-analytic (or-geometric) method. Conclusion: By the generalization of TTF distribution (PHD) and the consideration of heterogeneous components, the lifetime distribution model can delineate many real systems and be exploited for developing system operation policies such as preventive maintenance, warranty. Moreover, the effectiveness of the proposed RAPMC is verified by numerical experiments. That is, under the equivalent design conditions, it presented a system with higher reliability than RAP without component mixing (RAPCM).

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.899-906
• /
• 2013

Using generated conformations from docking analysis by Gold algorithm, some 3D-QSAR models; CoMFA and CoMSIA have been created on 39 N-benzoylated phenoxazines and phenothiazines, including their S-oxidized analogues. These molecules inhibit the polymerization of tubulin into microtubules and thus they have been studied for the development of antitumor drugs. Training set for the CoMFA and CoMSIA models using 30 docked conformations gives $q^2$ Leave one out (LOO) values of 0.756 and 0.617, and $r^2$ ncv values of 0.988 and 0.956, respectively. The ability of prediction and robustness of the models were evaluated by test set, cross validation (leave-one-out and leave-ten-out), bootstrapping, and progressive scrambling approaches. The all-orientation search (AOS) was used to achieve the best orientation to minimize the effect of initial orientation of the structures. The docking results confirmed CoMFA and CoMSIA contour maps. The docking and 3D-QSAR studies were thoroughly interpreted and discussed and confirmed the experimental $pIC_{50}$ values.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.1
• /
• pp.118-127
• /
• 2014

The configuration such as series, parallel and k-out-of-n of a repairable system directly affects its reliability. The maintenance strategy can also affect the overall performance of the system. The objective of this work is to investigate the possible trade-off between the configuration of a repairable k-out-of-n system and its maintenance strategy. The redundancy is considered to be the design decision variables, whereas the preventive maintenance period is considered to be the maintenance decision variables. The optimization model is used to minimize the overall life cycle cost associated with the system, considering constraint on reliability. Finally, genetic algorithm is used to find the optimal values for the decision variables. The result is compared with optimal values for considering redundancy and maintenance respectively.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.42-47
• /
• 2012

There are ATC (Automatic Train Control), ATP (Automatic Train Protection), ATS (Automatic Train Stop) and ATO (Automatic Train Operation) etc. in train control systems. As various train control systems are installed according to sections, on-board signaling systems are installed to apply to the section. Hence, operation flexibility of trains is decreased. In other words, when trains are operated in the section where other train control systems are used, the on-board signaling systems are changed. Recently, a study on the combined on-board signaling system has been researched to solve this problem. The combined on-board signaling system consists of ATC, ATP and ATS device. Because the train control systems are vital, it needs to design the combined on-board signaling system by using k out of n system. In this paper, when k out of n system is applied in the combined on-board signaling system, the reliability and loss cost are analyzed by using failure rate in each device. Hence, the ideal number of systems is presented according to the number of outputs.

• Journal of Environmental Health Sciences
• /
• v.12 no.2
• /
• pp.27-37
• /
• 1986

This study was carried out to investigate inflow stream of Chungju intake reservoir and in catchment area, run-off loading amount, distribution of Nitrogen and phosphorus, N/P ratio, correlationship between T-N and chlorophyll a, correlationship between T-P and chlorophyll a, and study of trophic state. Field survey was carried out from June to August, 1985, for the purpose of finding out the nitrogen and phosphorus concentration in Chungju intake reservoir.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.9
• /
• pp.988-994
• /
• 2011

A significant amount of nitrous oxide ($N_2O$), which is one of the serious greenhouse gases, is emitted from nitrification and denitrification of wastewater. Batch wastewater nitrifications with enriched nitrifiers were carried out under oxygen-limited condition with synthetic (without organic carbon) and real wastewater (with organic carbon) in order to find out the effect of ammonium concentration on $N_2O$ emission. Cumulated $N_2O$-N emission reached 3.0, 5.7, 6.2, and 13.5 mg from 0.4 l of the synthetic wastewater with 50, 100, 200, and 500 mg/l ${NH_4}^+$-N, respectively, and 1.0 mg from the real wastewater with 125 mg/l ${NH_4}^+$-N. The results indicate that $N_2O$ emission increased with ammonium concentration and the load. The ammonium removal rate and nitrite concentration also increased $N_2O$ emission. Comparative analysis of $N_2O$ emission from synthetic and real wastewaters revealed that wastewater nitrification under oxygen-limited condition emitted more $N_2O$ than that of heterotrophic denitrification. Summarizing the results, it can be concluded that denitrification by autotrophic nitrifiers contributes significantly to the $N_2O$ emission from wastewater nitrification.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.40-44
• /
• 2014

For the purpose of development of an effective process for purified CHMI particles, a series of experimental researches on the synthesis of CHMI from CHMAIE, purification and precipitation of CHMI were preformed. It is turned out that n-heptane reflux imidation is more beneficial than toluene put-out imidation not only to the synthesis but to the precipitation of CHMI. By washing the synthetic CHMI with cold n-heptane twice, purified CHMI with 99.7% purity could be obtained at the cost of 11.7% weight loss. And CMHI particles were effectively prepared by spouting molten CHMI through the spiral nozzle with 3 mm diameter under the pressure of $1.5{\sim}2.0kg/cm^2$.

• Journal of Powder Materials
• /
• v.12 no.3
• /
• pp.214-219
• /
• 2005

In order to investigate the formation of AlN, mechanical alloying was carried out in $N_2$ and $NH_3$ atmosphere. Differential thermal analysis (DTA), x-ray diffraction (XRD) and chemical analysis were carried out to examine the formation behavior of aluminum nitrides. No diffraction pattern of AlN was observed in XRD analysis of the as-milled powders in $NH_3\;or\;N_2$ atmosphere. However, DTA and chemical analysis indicated that the precursors for AlN were formed in the Al powders milled in $NH_3$ atmosphere. The AlN precursors transformed to AlN after heat treatment at and above $600^{\circ}C$. It was considered that the reaction between Al and $NH_3$ was possible by the formation of fresh Al surface during mechanical alloying of Al powders.