• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.101-109
• /
• 2016

PURPOSE. To investigate the void parameters within the resin cements used for fiber post cementation by micro-CT (${\mu}CT$) and regional push-out bonding strength. MATERIALS AND METHODS. Twenty-one, single and round shaped roots were enlarged with a low-speed drill following by endodontic treatment. The roots were divided into three groups (n=7) and fiber posts were cemented with Maxcem Elite, Multilink N and Superbond C&B resin cements. Specimens were scanned using ${\mu}CT$ scanner at resolution of $13.7{\mu}m$. The number, area, and volume of voids between dentin and post were evaluated. A method of analysis based on the post segmentation was used, and coronal, middle and apical thirds considered separately. After the ${\mu}CT$ analysis, roots were embedded in epoxy resin and sectioned into 2 mm thick slices (63 sections in total). Push-out testing was performed with universal testing device at 0.5 mm/min cross-head speed. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests (${\alpha}=.05$). RESULTS. Overall, significant differences between the resin cements and the post level were observed in the void number, area, and volume (P<.05). Super-Bond C&B showed the most void formation ($44.86{\pm}22.71$). Multilink N showed the least void surface ($3.51{\pm}2.24mm^2$) and volume ($0.01{\pm}0.01mm^3$). Regional push-out bond strength of the cements was not different (P>.05). CONCLUSION. ${\mu}CT$ proved to be a powerful non-destructive 3D analysis tool for visualizing the void parameters. Multilink N had the lowest void parameters. When efficiency of all cements was evaluated, direct relationship between the post region and push-out bonding strength was not observed.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.428-435
• /
• 1996

초미립 SiC분말과 SiC platelet을 2차성으로 Si3N4에 첨가하여 SiC/Si3N4 하이브리드 복합체를 가압소결로 제조한 후 2차상의 영향을 조사한 결과핫프레스법을 이용한 경우 SiC platelet은 Si3N4 기지 복합채의 치밀화를 저해하지 않고 초미립의 SiC 첨가는 Si3N4의 입성장을 효과적으로 억제하여 미세한 $\beta$-Si3N4의 grain을 형성함을 관찰하였다. 초미립 SiC첨가를 통한 복합체의 강도 증진은 상대적으로 $\beta$-Si3N4입자의 미세화에 의한 인성의 저하를 유도하나 SiC platelet을 첨가하여 급격한 강도 저하 없이 높은 인성을 갖는 하이브리드 복합체를 제조할 수 있었으며 SiC/Si3N4 하이브리드 복합체의 인성증진은 elongated $\beta$-Si3N4와 platelet SiC의 debonding에 의한 grain pull-out 영향임을 알 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.16-21
• /
• 2015

In this study, the effects of forming gas post metallization annealing (PMA) on recessed AlGaN/GaN-on-Si MOSHFET were investigated. The device employed an ICPCVD $SiO_2$ film as a gate oxide layer on which a Ni/Au gate was evaporated. The PMA process was carried out at $350^{\circ}C$ in forming gas ambient. It was found that the device instability was improved with significant reduction in interface trap density by forming gas PMA.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.755-759
• /
• 1988

Laminated Composites, SS41-Cu-SS41 plates are made by brazing bonding and hot bonding process. Fatigue repeated plane bending tests are carried out and the fracture behavior of Laminated composites, SS41-Cu-SS41 plates are compared with that of homogeneous steel, SS41plates. The following results are obtained; (1) The fatigue life of the brazing bonding plates is higher than those of SS41 plates and hot bonding plates under high stress. (2) The relations between the fatigue crack growth rate, da/dN and stress intensity factor are, da/dN=4.7*10$^{-10}$ $K^{3.20}$, for SS41 da/dN=7.8*10$^{-9}$ $K^{2.43}$, for CAH da/dN=3.6*10$^{-9}$ $K^{2.54}$, for CAB da/dN=1.58*10$^{-9}$ $K^{2.94}$ , for PAH da/dN=1.23*10$^{-9}$ $K^{2.69}$, for PAB

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.6967-6972
• /
• 2014

Assembly using a bolt and nut, and rivet or pin have been used widely for forming mechanical joints. The indent method is an easier process than other manufacturing techniques and the toughness of the material is excellent. On the other hand, there are many cases in which the cracks occur on the manufacturing process as the indent method. Therefore, two kinds of models, in which a pin goes into and out PCB plate in this study were developed using the CATIA program and finite element methods were performed using the ANSYS program. When a pin was passed through a PCB plate in cases 1 and 2, the maximum loads applied to the PCB plate were 79.708N and 90.277N, respectively. When the PCB plate came out of the pin in cases 1 and 2, the maximum loads were 63.783N and 33.75N, respectively. The damage prevention and durability can be improved by applying the study results to the design of real indentation.

• Advances in nano research
• /
• v.5 no.4
• /
• pp.373-392
• /
• 2017

Silver nanoparticles (AgNPs) were successfully synthesized through a simple green route using the Nelumbo nucifera leaf, stem and flower extracts. These nanoparticles showed characteristic UV-Vis absorption peaks between 410-450 nm which arises due to the plasmon resonance of silver nanoparticles. The Fourier transform infrared spectroscopy (FT-IR) confirmed the presence of amides and which acted as the stabilizing agent. X-ray diffraction spectrum of the nanoparticles confirmed the Face centered cubic (FCC) structure of the formed AgNPs. Dynamic light scattering technique was used to measure hydrodynamic diameter (68.6 nm to 88.1 nm) and zeta potential (-55.4 mV, -57.9 mV and 98.9 mV) of prepared AgNPs. The scanning electron micrographs of dislodged nanoparticles in aqueous solution showed the production of reasonably monodispersed silver nanoparticles (1-100 nm). The antimicrobial activity of prepared AgNPs was evaluated against fungi, Gram-positive and Gram-negative bacteria using disc diffusion method. Anti-corrosion studies were carried out using coupon method (mild steel and iron) and dye degradation studies were carried out by assessing photo-catalytic activity of Nelumbo nucifera extracts mediated AgNPs.

• Carbon letters
• /
• v.9 no.2
• /
• pp.131-136
• /
• 2008

In order to investigate the effect of doping C, N, B and F elements on $TiO_2$ for reducing the band gap, the heat treatment of $TiO_2$ was carried out with tetraethylammonium tetrafluoroborate. Through XRD and XPS analysis, the C, N, B and F doped anatase $TiO_2$ was confirmed. According to the increase of temperature during treatment, the particle size was increased due to aggregation of $TiO_2$ with elements (B, C, N and F). To investigate the capacity of photocatalyst for degradation of dye under solar light, the degradation of acridine orange and methylene blue was conducted. The degradation of dyes was carried out successfully under solar light indicating the effect of doping elements (B, C, N and F) on $TiO_2$ for reducing the band gap effectively.

• Journal of Veterinary Clinics
• /
• v.37 no.3
• /
• pp.115-122
• /
• 2020

The aim of this study was to evaluate double-pigtail ureteral stent fixation in cats. Medical records of 19 cats (23 ureters) with complete ureteral obstruction that double-pigtail ureteral stent placement were carried out were retrospectively reviewed. The cats were randomly classified into two groups; 13 cats (16 ureters) with double-pigtail ureteral stent fixed to urinary bladder (SF group) and 6 cats (7 ureters) with not fixed to urinary bladder (SNF group). The average age and weight of the cats was 7.4 years and 3.73 kg, respectively. Postoperative complications included chronic renal failure (n = 11), lower urinary track diseases (cystitis, hematuria, pollakiuria) (n = 7), stent migration (n = 6), anemia (n = 5), ascites (n = 2), hyperthermia (n = 1), enteritis (n = 1), oliguria (n = 1), hypotension (n = 1), ureteritis (n = 1), and pyelonephritis (n = 1). Stent migration did not occur in the 16 ureters of the cats in SF group but did occur in 4 out of 7 ureters of the cats in SNF group. The prevention of stent migration by stent fixation was significant (P = 0.04). Among the 13 cats in SF group, only 2 cats developed lower urinary track diseases, while 4 of the 6 cats in SNF group showed symptoms of lower urinary track disease. Thus, the cats that underwent double-pigtail ureteral stent fixation to the urinary bladder developed significantly fewer lower urinary diseases (P = 0.046). In conclusion, double-pigtail ureteral stent fixation to the urinary bladder for treatment of complete ureteral obstruction in cats can effectively prevent stent migration, which is common complication of stent placement.

• Korean Journal of Pharmacognosy
• /
• v.28 no.4
• /
• pp.264-270
• /
• 1997

This Study was carried out develop antitumor effect of the n-butanol soluble of fraction of Perilla frutescens on human skin melanoma cells. The antitumor activity of various fractions obtained form n-butanol soluble fraction of Perilla frutescens was evaluated in human skin melanoma cells. The antitumor activity of the n-butanol soluble fraction in human skin melanoma cells was evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay, neutral red (NR) assay and sulforhordamine B protein (SRB) assay of colorimetic assay methods. The light microscopic study was carried out to observe morphological changes of cultured human skin melanoma cells. These results were obtained follows; The fractions 5 and 6 of the n-butanol soluble fraction of P frutescens were shown significant antitumor activities. The number of human skin melanoma cells were decreased and tend to form cell cluster by treatment with actions 5 and 7 of the n-butanol soluble fraction of P. frutescens. The fraction 6 of the the n-butanol soluble fraction showed the highest antitumor activity on P. frutescens. These results suggest that the fraction 6 of the n-butanol soluble fraction of P. frutescens may be a valuable choice for the studies on the treatment of human skin tumors.

• Honam Mathematical Journal
• /
• v.40 no.2
• /
• pp.281-291
• /
• 2018

We associate a positive integer n and a subgroup H of the group $({\mathbb{Z}}/n{\mathbb{Z}})^{\times}$ with a polynomial $J_n,H(x)$, which is called the Galois polynomial. It turns out that $J_n,H(x)$ is a polynomial with integer coefficients for any n and H. In this paper, we provide an equivalent condition for a subgroup H to provide the Galois polynomial which is irreducible over ${\mathbb{Q}}$ in the case of $n=p^{e_1}_1{\cdots}p^{e_r}_r$ (prime decomposition) with all $e_i{\geq}2$.