• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.553-571
• /
• 2016

The progressive collapse potential of steel moment framed structures due to abrupt removal of a column is investigated based on the energy principle. Based on the changes of component's internal energy, this paper analyzes structural member's sensitivity to abrupt removal of a column to determine a sub-structure resisting progressive collapse. An energy-based structural damage index is defined to judge whether progressive collapse occurs in a structure. Then, a simplified beam damage model is proposed to analyze the energies absorbed and dissipated by structural beams at large deflections, and a simplified modified plastic hinges model is developed to consider catenary action in beams. In addition, the correlation between bending moment and axial force in a beam during the whole deformation development process is analyzed and modified, which shows good agreement with the experimental results.

• Architectural research
• /
• 제17권3호
• /
• pp.83-91
• /
• 2015

A comprehensive understanding of functions and performances enables a selection of appropriate alternatives to the existing design and can prevent defective design. A performance-based design quality management can ensure successful project completion. This study proposes a new model for design quality management in order to prevent defective design and to minimize design change. The new quality management model defines the requirement about function and performance based on technical characteristic, and assesses suitability for design alternatives. This study attempts to propose a quality matrix assessment method that can compare the alternative design and requirements defined with the new quality management model. This method can judge conformity and suitability of design quality in accordance with the requirements configured.

• 전기화학회지
• /
• 제9권4호
• /
• pp.151-157
• /
• 2006

A two-dimensional numerical model to study the performance of anode-supported flat-tube solid oxide fuel cell (SOFC) far the cross section of the cell in the flow direction of the fuel and air flows is developed. In this model a mass and charge balance, Maxwell-Stefan equation as well as the momentum equation by using, Darcy's law are applied in differential form. The finite element method using FEMLAB commercial software is used for meshing, discritization and solving the system of coupled differential equations. The current density distribution and fuel consumption as well as water production are analyzed. Experimental data is used to verify a predicted voltage-current density and power density versus current density to judge on the model accuracy.

• 정보교육학회논문지
• /
• 제24권4호
• /
• pp.379-390
• /
• 2020

최근 코로나19 상황으로 인한 비대면 교육의 확산으로 온라인 교수·학습 및 평가 도구에 대한 관심이 높아지고 있다. 도구의 효과적인 활용을 위해서는 학습자의 정의적, 인지적 변인 간의 구조적 영향력과 인과 관계에 대한 규명이 필요하다. 본 연구는 '온라인 저지'를 활용하는 프로그래밍 교육에서 도구의 활용 횟수, 자기효능감, 몰입, 컴퓨팅 사고력, 논리적 사고력으로 구성된 연구 모형과 경쟁 모형을 설정하고, 모형의 적합도와 경로 분석을 실시하였다. 분석 결과, '도구의 활용 횟수 → 자기효능감 → 몰입 → 논리적 사고력 → 컴퓨팅 사고력'에 이르는 인과 관계를 규명하였고, 도구의 활용 횟수가 학습 동기를 거쳐 사고력에 영향을 미치는 경로 상에 '자기효능감 → 몰입'의 이중 매개 효과, 또는 '몰입'의 단독 매개 효과를 확인하는 동시에 '몰입 → 자기효능감'의 이중 매개 변인으로는 도구의 활용 횟수가 사고력으로 발현되지 않음을 확인하였다. 한편, 동일한 경로 상에 '논리적 사고력 → 컴퓨팅 사고력'의 경로는 규명되었으나, '컴퓨팅 사고력 → 논리적 사고력'의 경로는 규명되지 않았다.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.372-380
• /
• 2012

Purpose: The purpose of this research is to develop the methods for evaluating the business value of a company's technical portfolios. In this study, technical portfolios of 10 major manufacturers and e-Biz industries are examined first from a business model perspective. Subsequently, we suggest future direction of R&D for the pharmaceutical industry by deducing the leading industries sharing similar traits with the pharmaceutical industry. Methods: In order to evaluate and analyze the patents of the major leading industries based on the constituents of a business model, the target patents were selected through the following procedure. Results: First, In this study, using the data obtained from the patent analysis, the differences in the technology portfolios of specific business entities based on the constituents of their business models. Second, deduced business rules of particular business entities through classification analysis and role-model of pharmaceutical industry Conclusion: If enterprise discovers technological change and characters of other enterprise or technology, enterprise could judge a direction of technology which will be developed in the near term and a plan which utilized existing technology to increase enterprise's profits.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.77-83
• /
• 2012

Objective: The aim of this paper is to introduce a method that can measure and analyze the judgment gaps between service providers and customers. Background: It is important to understand the good service that service providers and customers are thinking. If there is judgment gap between service providers and customers, it would cause an unsatisfactory service. The judgment gap should be thoroughly investigated for a good service design. Method: Lens model is a human decision making model that was proposed by Brunswick(1952). This study indicates whether the Lens model can be applied to analyze judgment gaps between service providers and customers. As a case study, a library lending service was selected. 5 librarians and 15 customers participated in the experiment that investigates their judgments on a good service. The obtained data were analyzed by a modified lens model. Results: Cue weighting policies of consumers and service providers were similar, except that consumers gave higher weight on tangibility than service providers. Service providers and consumers had a good knowledge on the service quality, but they could not well apply the knowledge to judge it. Conclusion: The lens model may be used to analyze judgment gaps between service providers and consumers in the other service areas. The decision cues that were used in this study can be changed, depending on the characteristics of the target service. Application: The method that is proposed in this study may help to investigate and analyze both consumers' and service providers' judgments on a variety of services.

• 기술혁신연구
• /
• 제15권2호
• /
• pp.177-209
• /
• 2007

This work firstly aims to analyse the balance between tangibles and intangibles as well as among human capital, structural capital and relational capital of evaluation indicators for the research institutes in science and technology sector conducted in 2006, by adopting intellectual capital model. The research question of this work comes from that while the R&D activity can produce both tangibles and intangibles, there have no been methodologies to relevantly measure and rationally judge these, in particular, intangible performance. The result shows that the institute evaluation system in 2006 had given more weight on tangibles and structural capital than intangibles and other intellectual capitals such as human capital and relational capital, in comparison to the past evaluation system, even though, in principle, the current evaluation system has to deal with the intangible research performances as well as tangible ones in economic, social and cultural perspective. Finally, based on these analysis, I will try to suggest some policy directions for overcoming the deficits of indicators in institute evaluation system.

• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.517-539
• /
• 2006

Friction problems involving rubber components are frequently encountered in industrial applications. Their treatment within the framework of numerical simulations by means of the Finite Element Method (FEM) is the main issue of this paper. Special emphasis is placed on the choice of a suitable material model and the formulation of a contact model specially designed for the particular characteristics of rubber friction. A coupled thermomechanical approach allows for consideration of the influence of temperature on the frictional behavior. The developed tools are implemented in the commercial FE code ABAQUS. They are validated taking the sliding motion of a rubber tread block as example. Such simulations are frequently encountered in tire design and development. The simulations are carried out with different formulations for the material and the frictional behavior. Comparison of the obtained results with experimental observations enables to judge the suitability of the applied formulations on a structural scale.

• 설비공학논문집
• /
• 제14권2호
• /
• pp.184-190
• /
• 2002

This study was undertaken to judge the quality of air-tightened exhibition cases. Exhibition cases for artifacts display provide a layer of protection between the interior conditions in the exhibition case and the exterior fluctuating conditions of temperature and relative humidity in the museum environment. An infiltration model of the exhibition case was developed through the experimental measurements to calculate the number of air change rate in the exhibition case undergoing in a day, which represents the airtightness of the exhibition case. The results indicate that tighter exhibition cases provide greater protection against the fluctuating conditions of temperature and humidity outside. When the temperature and humi- dity difference between the exhibition case in-and-out is larger, some absorption materials should be applied to control the environmental conditions in the exhibition case.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.37-40
• /
• 2009

Based on the study of Digital Elevation Simplification Model and fractal theory, this paper put forward a new method to simulate complex terrain. That use simplified DEM data to construct terrain frame based on the quad tree at first, and then use fractal to generate the details of every node of the tree. In the process of construction, the LOD theory is used to simplify the terrain and get its typical data. According to the change of view position and direction, the paper gives a new way to judge the visibility of the surface patch. Experimental results show that this algorithm is simple, efficient and supports the real time dynamic simulation of terrain model.