• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Clean Technology
• /
• v.2 no.1
• /
• pp.96-108
• /
• 1996

$NO_x$ is mainly emitted from mixed acid pickling process in the stainless industry and its impact to the environment has been worried over. This study which may be considered as one of the development of clean technologies, differing from the traditional end pipe technology is about how to reduce $NO_x$ emission through the modification of corresponding process. This study consists of two parts. First, the influence of various reaction parameters in a acid pickling process on $NO_x$ emission was investigated. Second, the influence of hydrogen peroxide on $NO_x$ formation, which is known as inhibitor of $NO_x$ emission, was investigated. Major findings in this study are as follows. The important reaction parameters which have a great influence on $NO_x$ emission are the reaction temperature and the concentration of fluoric acid. The concentration of nitric acid, some of which results in $NO_x$ compound is not as important as the concentration of fluoric acid. Synthetic mixed acid of nitric acid and fluoric acid itself in absent of pickling plate contributed the $NO_x$ emission, however, its impact was negligible in terms of quantity. The addition of hydrogen peroxide to the acid pickling process significantly contributed to the reduction of $NO_x$ emission and successfully achieved 80% reduction of $NO_x$ emission at the condition of $9.51{\times}10^{-2}mole\;hydrogen\;peroxide/m^2$ pickling area. This result was compared to literature value from Avesta steel process, indicating a sixth of hydrogen peroxide addition of Avesta's in achieving a same amount of $NO_x$ reduction. The region of the economic hydrogen peroxide addition per unit area of plate to be pickled from the result of this study was established.

• Management & Information Systems Review
• /
• v.38 no.4
• /
• pp.1-24
• /
• 2019

This study confirms the responses of consumers when the composition of emoticon bundles can be selected by individuals in MIM service. This aims to verify that customized bundling is a valid marketing strategy in the MIM emoticon market. Currently, the emoticon bundling used in Korean MIM services is in the form of pure bundling. As a result, Consumers must purchase an entire bundle even though he/she doesn't need to use all the emoticons contained in it. Some researches(e.g. Hitt & Chen, 2005; Wu & Anandalingam, 2002) show that when consumers value only part of the products or services included in pure bundling, customized bundling is much more profitable. In their works, customized bundling is appropriate when marginal costs are near zero. Information goods, such as emoticons, meet the condition. On the other hand, customized bundling increase the choosable options, so it can pose a problem of complexity (Blecker et al., 2004). And consumers may experience information overload(Huffman & Kahn, 1998). Thus, judgement on the necessity to introduce customized bundling needs to be made through empirical analyses in the light of characteristics of the product and the reaction of consumers. Results show that when customized bundling was introduced, consumers' purchase intention and willingness to pay significantly increased. Purchase intention for customized bundles has increased by 0.44 based on the five point Likert scale than the purchase intention for existing pure bundles. The increase in purchase intention for customized bundles was statistically independent of the existing purchasing experience. In addition, the willingness to pay was increased by about 2.8% compared to the price of the existing emoticon bundles in the whole group. The group with experience in purchasing pure bundles were willing to pay 5.9% more than pure bundles. The other group without experience in purchasing pure bundles were willing to buy if they were about 5% cheaper than the existing price. Overall, introducing customized bundling into emoticon bundles can lead to positive consumers responses and be a viable marketing strategy.

• Conservation Science in Museum
• /
• v.19
• /
• pp.1-18
• /
• 2018

The Stele for National Preceptor Hongbeop from the Jeongtosa Temple site in Chungju is one of the most important stone cultural heritage items for exemplifying the style of the Goryeo era. Despite its obvious value, this relic has been stored in a weathered condition at the National Museum of Korea. It had suffered various dismantling and displacements during the Japanese colonial period and had long been exposed in the open air. The stele was selected as a subject for the Stone Monuments Restoration Project launched by the National Museum of Korea in 2015. In preparation for its outdoor exhibition as part of the restoration project, this study investigated the characteristics of its materials, produced a map of its deterioration from weathering, and carried out ultrasonic analysis of the materials to provide findings useful for conservation treatment. The materials analysis revealed that the turtle-shaped pedestal of the stele was made from two-mica granite consisting of medium-grained quartz, plagioclase, alkali feldspar, biotite, and muscovite. Its body stone is crystalline marble, the rock-forming mineral in which is medium-grained calcite in a rose-pink color with dark grey spots. The dragon top of the stele is made of crystalline marble, the major component of which is medium-grained calcite of a light-grey color. The deterioration consists of 21.5% abrasion on the stone body, with its south face most damaged, and 18.6% granular disintegration, with the north face most damaged. The ultrasonic material characterization conducted for mapping the general condition of weathering shows low values on the parts-assembly area of the turtle-shaped pedestal and on the upper portion of the stone body. It is considered that there is dislocation due to partial blistering and fracturing as well as to the differences in surface treatment. Prior to the outdoor exhibition of the stele, the surface was cleaned of contaminants and was consolidated based on the scientific investigation in order to prevent weathering from the external environment.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.246-263
• /
• 2019

The stone Buddha statue of Sangunsa Temple at Bukhansan in Goyang, Gyeonggi Province, is an excellent example of stone Buddha statues created in the late 15th century. On the base of the figure, there is an inscription, which informs that it was produced in 1497. In recognition of this significance, it was recently designated as a tangible cultural asset in Gyeonggi-do. Thus, this paper tried to evaluate the value of the statue by analyzing iconography and style. The characteristics of a typical 15th-century style that the Buddha statue of Sangunsa Temple shows are the form of ushnisha, the way clothes are worn, the form of a w-shaped chest muscle, and the simple lotus pedestal. On the other hand, the elongation of the waist and the disappearance of the waistband on undergarments are new forms of Buddha statues in the 16th century. Besides, parting the hair in the middle of the head and leaf-shaped short ribbon draped on undergarments are unique features that only appear on the statue of Sangunsa Temple. Sangunsa has been known to be built in the early 18th century based on Bukanji compiled by Seongneung in 1745, and Bongeunbonmalsaji composed in 1943. However, the statue was created in the late 15th century, before the establishment of the temple in the early 18th century. Therefore, this paper briefly reviewed the history of Sangunsa Temple, focusing on the initial period, referring to the historical sites and the relics that were passed on to the temple, as well as the literature records. The data newly referred to in the study are as follows: Sangunsa Stone Pagoda, presumed to be from the Goryeo Dynasty; the Stone Buddha Statue of Sangunsa; Wooden Amita Triad Buddha Statue of Sangunsa. According to the data and contrary to previously-held beliefs, Sangunsa Temple is believed to have been operating since the Goryeo Dynasty. It can be inferred through analysis of the stone Buddha statue of Sangunsa Temple that the size of the Temple before the 18th century was not very large.

• Food Science of Animal Resources
• /
• v.26 no.3
• /
• pp.297-305
• /
• 2006

This study was conducted to evaluate the quality characteristics of low-fat emulsion type sausages containing 0% tomato powder (C), 5.0% ground raw tomato paste (T1) and 0.5% freeze dried tomato powder (T2) during storage at $5{\pm}1^{\circ}C$ for 30 days. The crude protein content of T2 was significantly lower (p<0.05) than that of the other sausage types. Moisture, crude fat and crude ash contents of the sausages during storage were not affected by the addition of tomato. The pH and shear force ($kg/cm^2$) values of C were significantly higher (p<0.05) than those of T1 and T2. There was no significant difference among the different sausages in cooking loss, ranging from $13.00{\sim}14.98%$. The WHC values of T1 and T2 were significantly higher (p<0.05) than that of C. The values of TBARS were significantly (p<0.05) increased for ail sausages following storage. The TBARS value (mg MA/kg) of C was significantly higher (p<0.05) than those of T1 and T2 at 15 days of storage, however T1 was significantly higher (p<0.05) than the other sausages after 30 days of storage. The meat color values tended to decrease with increased storage time. Microorganism analysis revealed that all sausage types did not reach $4.4log_{10}CFU/g$ until 30 days of storage. The texture, brittleness, Hardness, and springiness of each sausage type were not significantly different after 1 day of storage, while the cohesiveness, gumminess and chewiness of T1 and T2 were significantly higher (p<0.05) than that of C. T1 and T2 sausages had a slightly higher score regarding color, aroma, tenderness and overall acceptability, however the sensory evaluation score among the different sausage types was not significantly different (p>0.05). In conclusion, low-fat sausage with added tomato showed higher lipid oxidative stability during storage than sausage to which no tomato was added.

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.234-240
• /
• 2012

This study was conducted to examine the effects of low molecular weight gelatin hydrolysates (GH, less than 3kDa), extracted from pig skin collagen on the bone metabolism of ovariectomized (OVX) rats. The rats in the experimental groups were randomly segregated into six different treatment groups such as 1) NC, the normal rat fed AIN 93 diet (basal diet) only; 2) OC, the OVX rat fed the basal diet only; 3) GH 0.1, the OVX rat fed the basal diet with 0.1% GH; 4) GH 0.8, the OVX rat fed the basal diet with 0.8% GH; 5) G 0.1, the OVX rat fed the basal diet with 0.1% gelatin; 6) G 0.8, the OVX rat fed the basal diet with 0.8% gelatin. Body weight gain in the GH 0.1, GH 0.8, and G 0.8 was significantly higher than those in the NC and OC. Feed intake of the GH 0.1 and GH 0.8 was higher than that of the NC and OC, while no significant difference was found in feed efficiency ratio (FER). BMD of the GH 0.8 was higher than that of the OC. However, gelatin hydrolysates and gelatin resulted in higher BMC level compare to the OC. Serum HDL-cholesterol of rat fed GH and gelatin was higher than that of OC (p<0.05). LDL-C of the GH 0.1 and the GH 0.8 tended to be less than that of OC. Serum alkaline phosphatase (ALP) of the GH 0.1 was lower than that of the OC. The serum of GH 0.8 showed lower osteocalcin value than the OC (p<0.05). In addition, GOT and GPT levels significantly decreased in all treatment groups. These results indicated that gelatin hydrolysates from pig skin gelatin hydrolysates enhanced BMD and serum biochemical parameters related to bone metabolism. Therefore, the gelatin hydrolysates could be used as a beneficial material to improve bone health.

• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.68-76
• /
• 2012

Olive oil and grape seed oil (10% of meat weight) were added to a package of beef loin. The package was then vacuum-sealed, and high pressure was applied (HP, 600 MPa) to investigate the effect of the penetration of vegetable oil into meat and safety and quality of the meat. Non-HP (0.1 MPa) without any oil treatment was considered as a control. The color $L^*$ and $b^*$-values of beef loin were higher and the $a^*$-value was lower than those of the control after HP at 600 MPa. The total aerobic bacterial number was 3 Log CFU/g in the control but no viable cell was detected in the beef with 600 MPa. All inoculated E. coli and L. monocytogenes were inactivated by HP. The beef loin with vegetable oil added without HP did not show any difference in fatty acid composition, but that treated by HP showed a higher oleic and linoleic acid content when olive oil and grape seed oil were added, respectively. The addition of olive oil inhibited lipid oxidation, and sensory evaluation revealed that there was no difference among treatments. The results indicate that the addition of vegetable oil followed by the application of HP enhances the safety of beef loin, changing the fatty acid composition in a health beneficial way. In addition, the use of olive oil can inhibit lipid oxidation induced by HP.

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.190-197
• /
• 2012

This study was performed to evaluate the extraction method (Yacon ethanol extracts; YEE, Yacon pressed extracts; YPE) and various levels (0.05-1.0%) of Yacon (Polymnia sonchifolia) on antioxidant and antimicrobial activities. In linoleic acid emulsion of YPE, there were higher iron chelation activity and antioxidant activity than those of YEE (p<0.05). A 1,1- diphenyl-2-picryl hydrazyl (DPPH) radical scavenging activity and reducing power of both extracts showed a higher rate at 0.5% level. Ground pork patties, which contain 0.5% YEE and YPE, were manufactured and BHT (0.01%) was used as a reference. Physicochemical properties and microbial counts of ground pork patties, containing a different type of Yacon, were evaluated during the 14 d of storage at $4^{\circ}C$. A pH level, and lightness (Hunter L), as well as the yellowness (Hunter b) values of treatments were not different from those of the control (p>0.05), but increased during storage, at $4^{\circ}C$. Lightness values of ground pork patties, with Yacon extracts, showed the highest. TBARS value of ground pork patties that contains Yacon increased with increased storage at $4^{\circ}C$ (p<0.05), and pork patties with YPE or YEE retarded the lipid oxidation, during refrigerated storage, as compared to that of the CTL. Thus, YPE could be used as a potential possibility to inhibit the lipid oxidation of processed meats, during the refrigerated storage.

• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.531-541
• /
• 2013

This study was performed to investigate the antioxidant effect of Sansa (Crataegi fructus) extract in vitro, and to evaluate the functional effects of Sansa powder addition on the quality properties and storage characteristics of Tteokgalbi. Total polyphenol and flavonoid contents of Sansa extract were found to be 127.00 mg/g and 54.05 mg/g, respectively. The DPPH radical scavenging activity of Sansa extract was high and it was similar to the BHA and BHT. The Tteokgalbi was prepared by 0% (N), 0.1% (S1), 1% (S2), and 2% (S3) of the Sansa Powder. Addition of Sansa powder decreased the protein and lipid contents, but the ash content was significantly increased (p<0.05). Increasing the amount of Sansa powder in the pork Tteokgalbi tended to increase the water holding capacity (WHC) values and the cooking loss (p<0.05). The addition of Sansa powder increased the hardness and chewiness values, but did not affect the cohesiveness and springiness values. In the sensory evaluation, the S3 Tteokgalbi had the best score in color. Values of pH, total microbial counts, thiobarbituric acid (TBA) and volatile basic nitrogen (VBN) values decreased significantly added Sansa powder relative to the normal (p<0.05). The S3 Tteokgalbi was significantly (p<0.05) more effective for delaying lipid peroxidation than the other groups. Sansa powder addition increased the L (lightness) and a (redness) values. Therefore, the results demonstrate that adding the Sansa powder to the pork Tteokgalbi tended to improve antioxidative and antimicrobial effects during the chilled storage period.