• 대한공업교육학회지
• /
• v.31 no.1
• /
• pp.146-169
• /
• 2006

'VEC 2010' is a mid-long term scheme on the development of Vocational Education for Chung-buk which is to be accomplished by 2010. On the basis of this scheme, schools adopt 3-Type curriculum considering their conditions and covert themselves into specialized high school which is associated with local industry cluster. They also establish combined high schools which run various curriculums emphasizing basic vocational abilities so that they can meet the needs of demanders The activation plan of Chung-buk province vocational education is a dualized one which is for both ongoing education for entrance into a school of higher grade and the last education for employment, which is supposed to foster the human resources required by the knowledge-based society in the 21st century. The specific contents of 'VEC 2010' is as follows. First, VEC 2010 presents 2 kinds of mid-long term management system for industrial high schools: general industrial high school, specialized high school(single type, combined type). Second, VEC 2010 arranges and run the 3-Type of curriculum of Chung-buk province industrial high schools: employment-centered type, entering higher school-centered type, inaugurating enterprise-centered type. Third, VEC 2010 divides Chung-buk province industrial high schools into 4 districts and suggests mid-long term reorganization plan of system. Fourth, VEC 2010 suggests the substantial strategies of Chung-buk province vocational education: scholarship improvement in the vocational investigation course of the government-sponsored scholastic aptitude test, education for improving basic vocational abilities, substantial management of joint laboratory, administrative and financial support of development of specialized, licensed textbooks. reenforcement of career education.

• Composites Research
• /
• v.13 no.4
• /
• pp.42-53
• /
• 2000

A study has been made to establish an optimum condition in the surface treatment and curing method that is important for the fabrication of Al 7075/CFRP laminates. PAA(Phosphoric Acid Anodizing) provided a good adhesive strength and FPL(Sulfuric / Sodium Dichromate Acid Etching) had a similar adhesive strength with PAA. On the other hand, the poor adhesive strength was shown on vapor degrease and CAA(Chromic Acid Anodizing). By using the atomic force microscope(AFM), it was found that the PAA oxide surface obviously had a greater degree of microroughness as compared to vapor degrease, CAA and FPL treated surfaces. These results support the concept of a mechanical interlocking of the adhesive with-in the oxide pores as the predominant adhesion mechanism. In curing methods, the adhesive strength of co-curing method was higher than that of secondary curing method. With respect to stability of specimen shape, the secondary curing method was better than co-curing method. DMA(Dynamic Mechanical Analysis) test revealed $T_g$ in curing times over 60 min is nearly same, so it is estimated they will have similar degree of curing and joint durability in using FM300M adhesive film.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.64-77
• /
• 2015

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military's Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military's live fire training by introducing of US Army weapons danger zone program and Range Safety Manual

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.67-74
• /
• 2020

The purpose of this study has developed a teaching and learning informatization indicator that provides the basis for utilizing or disseminating the beneficial teaching and learning informatization environment promoted by each university. The research method analyzes various informatization indicators developed by KERIS from 2002 to 2015 and recent environment such as Edutech, future education report, teaching and learning field report, and reflects them in indicator development. The development of the third indicator was completed by dividing it into Input, Process, Output stages by reflecting expert opinions in the first and second indicators. As a result, the core words of the university's teaching-learning informatization infrastructure building, sharing of educational resources, open development and sharing, joint purchase of resources, information safety system and literacy education, current status grasping, and resource utilization were derived. In the future, I will fill out the questionnaire to supplement the question through a pilot test and to grasp the current status of teaching and learning informatization in the entire university.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.511-521
• /
• 2015

The thermal bridge occurring in a building influences its thermal performance and durability. The domestic typical multi-unit residential buildings suffer thermal losses resulting from thermal bridges of the balcony slab. To minimize the thermal loss between inside and outside of the balcony slab, thermal bridge breaker(TBB) systems have been developed and applied in building construction. Although thermal bridge breaker systems for reinforced concrete(RC) wall-slab joints can improve the thermal performance of a building, it is necessary to verify the structural performance of TBB systems whether they provide proper resistance for cyclic loading. In order to investigate the structural characteristics of TBB systems embedded in RC slabs, cyclic tests of wall-slab joints were performed by applying two reversed cycles at each up to 30 cycles. The test results show that the RC slabs embedding TBBS systems can present excellent structural performance and the maximum moment capacity, energy dissipation capacity and ductility of TBBs systems are enhanced compared to those of the typical RC slabs.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.371-379
• /
• 2008

In this study, seismic elastic wave and dynamic elastic modulus properties are investigated by down-hole seismic tests that were applied to the 11 gneiss area. The research results show that the realtionship between the two properties are $V_s=0.5589{\times}V_p$ in gneiss. The relationship between the two properties are separated into two groups. Group 1 is influenced mainly by the specific gravity of rock, but group 2 is influenced mainly by the joint aperture. As weathering progresses, group 1 clearly shows a decreasing tendency. In fresh and slightly weathered rock-mass, correlations between $V_p$ and dynamic elastic modulus is expressed in linear line but in moderately-highly weathered rock-mass, correlations between $V_p$ and dynamic elastic modulus is expressed curve as a quadratic function. Correlations between $V_s$ and dynamic elastic modulus are analyzed similar with a $V_p$ case.

• Tunnel and Underground Space
• /
• v.17 no.3 s.68
• /
• pp.203-215
• /
• 2007

Stability and mechanical deformation behavior of rock masses are highly dependent on the mechanical characteristics of contained discontinuities. Therefore, mechanical characteristics of the discontinuities should be considered in the design of tunnel and underground structures. In this study, direct shear tests for rough granite joints were carried out under constant normal stiffness conditions. Effects of initial normal stress, shear velocity, and surface roughness on the characteristics of shear strength and deformation behaviors were examined. Results of shear testing under constant normal stiffness conditions reveal that shear behaviors could be classified into two categories, based on the amount of decrease in shear stress at the Int peak shear stress. With initial normal stiffness increasing, it turned out that shear displacement at peak stress and the first peak shear stress increased, however friction angle and friction coefficient showed decrease. In case of shear stiffness and average friction coefficient, it turned out that they are not dependent on the initial normal stress. Minor effects of shear velocity on rough joints were observed in several shear quantities. However, the effects of shear velocity were insignificant regardless of the normal stress increase. Change of shear strength and deformation characteristics on joint roughness were examined, however, it turned out that the variations were attributed to deviation of shear test specimens.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.1
• /
• pp.21-28
• /
• 2009

Objectives : Whilst hypertension exerts a negative effect on several organs there have been few studies regarding its effect on pulmonary function. The objective of this study was to examine the relationship between hypertension and pulmonary function in rural Korean adults Methods : In 2006, 2534 people were recruited, aged 40 to 70, in Kangwha County. We selected 1454(male: 624, female: 830) participants whose pulmonary function results were repeatable. Blood pressure(BP) was measured twice and the average calculated. Participants were divided into two groups(hypertensive group and non-hypertensive group) in accordance with The Seventh Report of the Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure. Pulmonary function was measured by dry rolling seal spirometry. Forced expiratory volume in the one second and forced vital capacity were converted into percent-predicted values based on average pulmonary function amongst Koreans. Results : The number of hypertensive participants in the present study was 460(male: 205, female: 255) and the number of non-hypertensive participants was 994(male: 419, female: 575). Our findings have shown that the mean values for expiratory volume in the one second and forced vital capacity were significantly lower for hypertensive people than for non-hypertensive people, among women(P=0.002 for forced expiratory volume in the one second, p<0.001 for forced vital capacity volume). Odds ratio analysis revealed that hypertensive participants were more likely to have lower pulmonary function than non-hypertensive participants, again significantly among women. Conclusions : The pulmonary function of hypertensive women was significantly lower than that of non-hypertensive women aged 40-70.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.207-215
• /
• 2009

There has been a diversity of therapeutic interventions for patients with chronic low back pain. However most of them have been focused on only pain. But the patients usually have a kind of structurally abnormal have fixed in lumbar vertebrae, which can decrease range of joint movement and, what is worse, reduce immediate dynamic balancing ability(IDBA). The reduced IDBA can increase the risk of injury and decrease coping ability in dangerous situation. So we introduced Maitland's manual therapy in this study in order to recover the IDBA in patients with chronic low back pain. Sixty-four patients diagnosed with chronic low back pain were included for the study. Among them, thirty-two patients(experimental group) were managed by Maitland's manual therapy, another thirty-tow patients(control group) were treated by physical science methods(H/P, TENS, U/S). Each group made use of highly reliable(0.81$\sim$0.96) star excursion balance test(SEBT) to compare the possible changes of IDBAs in two groups after treatment. In experimental group, IDBA has increased in forward, rightward, leftward, and backward, but in control group, not changed. According to the results, we concluded that Maitland's manual therapy is effective for increasing IDBA by making joints more flexible in lumbar vertebrae.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.16-23
• /
• 2020

Water pipes are important facilities and consist of pipes of various specifications and materials. The annual average number of earthquakes in Korea is steadily increasing. Therefore, in case of the water pipe, it is estimated necessary to prepare for earthquakes. Damages to the water pipe by the earthquake can cause problems such as water supply and fire suppression, and cause damage to life and property. In Korea, however, it is difficult to find examples of seismic performance evaluation of water pipes based on experimental study. Damage to the water pipes by the earthquake is caused by the displacement-controlled behavior of the ground which is the liquifaction and fault lines. Especially, The damage to the water pipes by the earthquake is concentrated on the joint of the pipe. In particular, piping less than 200mm in diameter was found to be dangerous. Thus, in this study, the seismic and settlement performance of iPVC buried water pipes with fixed joints with a clamp of 150mm was evaluated with a test approach.