• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.308-318
• /
• 2009

The purpose of this study was to develop the functionally improved winter work clothing for the Korean railroad workers. Based on the questionnaires, the sample clothing for the Korean railroad workers was produced. The design, materials, and patterns were modified to increase mobility and comfort of workers. Water-repellent treatment was added to the material in order to decrease the dirt and stains while working. Also the reflective strips were added to chest and back of the upper garment in order to increase visibility and safety of the workers. In terms of the design and pattern underarm of the sleeve and side panel of the bodice were put in together and action pleats at the back were inserted in order to decrease the pullback of the armpit and scapular area and increase mobility of the arm movement. Also the patterns of the elbows areas were modified to increase mobility of joint. The prototype was evaluated an objective assessment and subjective assessment to compare to the existing working uniform. Assessment group was consisted of 5 subject groups and 11 expert groups and evaluated external appearance and adaptability to the movements. According to the results, the prototype was evaluated better than the existing working uniform in appearance and adaptability except height of collar. A field test was conducted to compare the prototype and the existing working uniform. The field tests were performed by 6 workers in the Korean railroad. According to the results, the prototype was improved in terms of adaptability and comfort.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.2
• /
• pp.247-249
• /
• 2006

Purpose: The neural injuries by the sprain around the ankle joint may contribute the chronic pain. Authors analyzed the incidence and the contributing factor of the neural injuries in ankle sprain. Materials and Methods: 52 patients (54 cases) were involved in this retrospective study. Patient with diabetes or spinal disease were excluded. Plain radiograph and MR image were evaluated. Treatments were consisted of cast immobilization for 4 weeks with weight bearing ambulation following bracing for 8 weeks. Neurologic evaluation were performed at 3 months, 6 months, 12 months post-injury period and each neural injury were confirmed by electromyography or lidocaine block test. Results: The average age was 39 years old and 34 cases were male and 20 cases were female. Rupture of the anterior talofibular ligament was observed in 48 cases, distal anterior tibiofibular ligament in 37 cases, calcaneofibular ligament in 6 cases. One cases revealed no injury of the ligament. Neural injuries around ankle was observed in 13 cases ; superficial peroneal nerve in 9 cases, sural nerve in 5 cases, saphanous nerve in 1 case. Neural injury was not influenced by the degree of ligament injuries but by the incidence numbers of ankle sprain. All cases were treated conservatively and symptom was subsided in all but 2 cases. Conclusion : Although the incidence is relatively low, the neural injuries in ankle sprain may occur in the recurrent ankle sprain and conservative treatment for neural injuries is satisfactory.

• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.393-402
• /
• 2012

A behavior of ridge-cut rock slope had been monitored by installing inclinometers and regional slope movement toward rear side of cut face was detected. To delineate the governing factors of slope behavior, especially backward slip of ridge-cut slope, petrographic characteristics of rock cores obtained from four drilled boreholes had been examined. BIPS images inside boreholes had been acquired and structural characteristics of slope rock had been studied. Mechanical properties of discontinuity planes distributed in the drilled core had been measured and the shear strength of coal seam imbedded-discontinuity planes also had been obtained by performing the direct shear test. Monitoring results of slope behavior had been analyzed by comprehensibly considering both the mechanical and structural characteristics of slope rock and coal seam-imbedded discontinuity planes, and the potential governance of coal seam and clay minerals embedded in the joint plane on the regional slope behavior has been also identified.

• Explosives and Blasting
• /
• v.27 no.1
• /
• pp.47-52
• /
• 2009

Blasting is necessary for excavation processes since more than 70% of korean land is consist of mountains. The vibration and noise accompanied by blasting processes usually bring about public complaints. Blasting patterns are chosen by economical efficiency, stability and construction conveniency. However, there are many alternatives without control to settle the popular complaint. To prevent those alternatives, standard blasting method for design and construction were suggested by MLTM (Ministry of Land, Transport and Maritime Affairs) in 2006. However, standard blasting pattern of MLTM was designed in a lump irrespective of types of rocks. Economical loss may occur by ignoring the characteristics of rocks for the applications to the rocks with low intensity, such as shale, or containing many joint. We deduced some economical progresses by performing test blasting with adjusted drilling spacing and length of burden considering the characteristics of local rock. This paper suggests the start of case studies for different applications. Economic improvement can be expected by applying those results deduced from case studies to design and construction.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.1
• /
• pp.71-82
• /
• 2015

PURPOSE: The aim of this study is to compare changes in the thickness of the gluteus medius muscle fiber between chronic low back pain(clbp) with gluteus medius weakness and healthy subject. METHODS: Ultrasound imaging was used to measure in the thickness of each fiber of the gluteus medius muscle based on maximal muscle contraction during abduction motion of the hip joint in a healthy group (11 subjects) and a chronic CLBP group (21 subjects). An independent t-test was performed to analyze the difference of thickness in each fiber of the gluteus medius muscle and the rate of changes in the fibers in the two groups. RESULTS: The fiber thickness changes in the gluteus medius muscle were significantly lower for the posterior fiber in the CLBP group compared to the healthy group (p<0.01). The changes in rate of difference of thickness the posterior part of the gluteus medius muscle was significantly lower in the CLBP group than in the healthy group (p<0.05). CONCLUSION: The findings of this study CLBP patients with weakness of the gluteus medius muscle that lower for the posterior fiber's difference of thickness and rate of change in the CLBP group compared to the healthy group. Indicate that rehabilitation of CLBP patients with weakness of the gluteus medius muscle should consider the functions of posterior fiber of the gluteus medius muscle.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.2
• /
• pp.69-74
• /
• 2018

PURPOSE: Stroke patients may develop an over-pronated foot, resulting in a lower medial longitudinal arch. This can lead to a structural change of the foot due to deformation of the musculoskeletal system. The purpose of this study was to examine the effects of modified low-dye taping on stroke patients with an excessively pronated foot. The effect of the taping on the foot after light daily activity was also examined. METHODS: The subjects consisted of 21 stroke patients with an excessively pronated foot, as measured by the navicular drop test. First, their navicular heights were measured at a relaxed standing position (measure 1) and while standing in the subtalar neutral position (measure 2). Modified low-dye taping was applied to each subject's affected foot and the navicular height was then measured for the standing posture (measure 3). Finally, each subject walked around for 10 minutes and the navicular height was measured again (measure 4). RESULTS: Statistical analyses showed that the navicular height value at the relaxed standing position (measure 1) was significantly lower than for the other 3 measurements. That is, the modified low-dye taping was effective in maintaining a subtalar neutral position, even after a 10-minute walk, for stroke patients with an excessively pronated foot. CONCLUSION: The results suggest that modified low-dye taping applied to stroke patients with an excessively pronated foot could be an effective way to place the subtalar joint in a neutral position, and that its effect can be sustained for light daily activities.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.76-83
• /
• 2013

This study investigated the effect of bonding temperature and holding time on microstructures and mechanical properties of diffusion bonded joint of Haynes230. The diffusion bonds were performed at the temperature of 950, 1050, and $1150^{\circ}C$ for holding times of 30, 60, 120 and 240 minutes at a pressure of 4MPa under high vacuum condition. The amount of non-bonded area and void observed in the bonded interface decreased with increasing bonding temperature and holding time. Cr-rich precipitates at the linear interface region restrained grain migration at $950^{\circ}C$ and $1050^{\circ}C$. However, the grain migration was observed in spite of short holding time due to the dissolution of precipitates to base metal in the interface region at $1150^{\circ}C$. Three types of the fracture surface were observed after tensile test. The region where the coalesce and migration of grain occurred much showed high fracture load because of base metal fracture whereas the region where those did less due to the precipitates demonstrated low fracture load because of interface fracture. The expected fracture load could be derived with the value of fracture area of base metal ($A_{BF}$) and interface ($A_{IF}$), $Load=201A_{BF}+153A_{IF}$. Based on this equation, strength of base metal and interface fracture were calculated as 201MPa and 153MPa, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.483-487
• /
• 2014

In this study, joining methods with SiC powder as the joining adhesives were studied in order to avoid the residual stresses coming from CTE (Coefficient of Thermal Expansion) mismatch between substrate and joining layer. The shear strength and microstructure of joined material between SiC substrates are investigated. The commercial Hexoloy-SA (Saint-Gobain Ceramics, USA) used in this work as substrate material. The fine ${\beta}$-SiC nano-powder which the average particle size is below 30 nm, $Al_2O_3$, $Y_2O_3$, and $SiO_2$ were used as joining adhesives. The specimens were joined with 20MPa and $1400-1900^{\circ}C$ by hot pressing in argon atmosphere. The shear test was performed to investigate the bonding strength. The cross-section of the joint was characterized by using an optical microscope and scanning electron microscopy (SEM).

• The Journal of Korean Physical Therapy
• /
• v.25 no.1
• /
• pp.29-35
• /
• 2013

Purpose: The purpose of this study was to investigate the correlation between shoulder pain and disability index (SPADI) with participation in badminton and to find the effects of badminton on the shoulder joint. Methods: A questionnaire was answered by 143 people with shoulder pain and disability in badminton clubs located in Busan, Gyeongsangnam-do. Out of the 143 subjects (91 males, 52 females), about half (72 people) were over 40 years old, with 71 people over 50 years old. The questionnaire contained 27 questions involving demographic participation characteristics, playing characteristics, and SPADI. Data analysis was performed using the SPSS statistics program to conduct frequency analysis, cross analysis, the t-test, and one-way analysis of variance. Results: The correlation between badminton career, frequency of play, and SPADI was statistically significant. There was a significant increase in SPADI scores for players over 40 years old. The over 40 year old group with less than 5 years of badminton had a significantly increase in SPADI score. The over 50 year old group showed a significantly lower SPADI score compared with the over 40 group. Conclusion: We suggest that beginner badminton players learn correct posture and badminton skills from professionals, participate regularly, and maintain an appropriate intensity/frequency of badminton.

• International Journal of Automotive Technology
• /
• v.5 no.1
• /
• pp.55-59
• /
• 2004

Spot welding is a very important and useful technology in fabrication of thin sheet structures such as the parts in an automobile. However, because the fatigue strength of the spot welding point is considerably lower than that of the base metal due to stress concentration at the nugget edge, the nugget size must be estimated to evaluate a reasonable fatigue strength at a spot welded lap joint. So far, many investigators have experimentally studied the estimation of fatigue strengths of various spot weldments by using a destructive method. However, these destructive methods poses problems so testing of weldments by these methods are difficult. Furthermore, these methods cannot be applied to a real product, and are time and cost consuming, as well. Therefore, there has been a strong, continual demand for the development of a nondestructive method for estimating nugget size. In this study, the effective nugget size in spot weldments have been analyzed by using thermoelastic stress analysis adopting infrared thermography. Using the results of the temperature distribution obtained by analysis of the infared stress due to adiabatic heat expansion under sinusoidal wave stresses, the effective nugget size in spot welded specimens were estimated. To examine the evaluated effective nugget size in spot weldments, it was compared with the results of microstructure observation from a 5％ Nital etching test.