• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.218-222
• /
• 2011

This paper proposes a single-joint optical torque sensor with one body structure. Conventional optical torque sensors consist of three parts, two plates and an elastic structure. They have slightly slipping problem between plates and elastic structure due to the manufacturing tolerance. Since the order of measurement range of optical sensor is about ten micrometers, the slipping problem causes large measurement error, especially in the case of vibrational or high speed plant. This problem does not occur in the proposed design due to the one body structure. The proposed sensor has advantage of low cost, light weight, and small size. And it is easy to design and manufacture. Simulation works that analysis of stress and strain are performed accurately. To demonstrate the performance of proposed sensor, experiments were implemented to compare with a commercial force/torque sensor (ATI Mini45).

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.40-48
• /
• 2016

The engineering knowledge and technology is core driving forces of continuous growth in knowledge based society. Companies, the government, and universities are the subjects of an innovation and the cooperation between them is very important. Nowadays, the main purpose of industry-university cooperation moves to train experts and develop a new product. A shift of the paradigm came from the change of recognition that the final consumers of the program are companies and the universities are supporters of the program. In this paper, we investigate the purpose, participation and satisfaction of companies to industry-academy technology cooperation through empirical studies. The need to expert training, product development and process development makes companies participate industry-academy technology cooperation and companies have different purpose of participation by the business type. Companies often feel that expert training, subsidiary purpose of industry-academy technology cooperation, is more important than product development or process development. This result is caused by the real world environment of small and mid-size companies, lacking of technology experts. The participation of companies to each technology cooperation program (technology transfer, joint technology development, consigned technology development, technology consulting, co-op. lab.) is also different by business type. The companies' satisfaction with the purpose of process development is relatively higher than that with the purpose of product development and companies show also different satisfaction value by business type and participating program. The results of this study can give a contribution to the design of demand oriented industry-academy technology cooperation model.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.722-726
• /
• 2010

Inventory survey is process collecting data about cut slope. It's different from inspection. It contains not only basic information about cut slope, especially location, GPS positioning, height, length, weathering, joint direction, water conditions but also level of danger and damage. Collected data are being used get at status about cut slope along national roads. And It helps judging about priority of detailed investigation. According to results of analysis, we found better method about maintenance of cut slope. Later on, if inventory research is finished, we will understand characteristics of collapse slopes.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.143-147
• /
• 1998

As the accuracy of manufactured goods needed high-accuracy processing has made the efficiency of NC and measurment technology develop, the innovation of machine tools has influence the development of the semi-conductor and optical technology. We can mention that a traction role of the acceleration for the development like that depends on the development of the measurement technics - Stylus instrument method, STM, SEM, Laser interferometer method - which are used for measuring the movement accuracy of machine tools. The movement error factors in movement accuracy are expressed as yaw, roll, and pitch etc. Machining center has 21 movement error factors including of 3 axies joint errors because that has 3 axies and has been measured as the standard of the unloaded condition until now inspite of getting static, dynamic, and servo-gain errors in the case of expending the error range. Therefore, this study tries to measure position accuracy according to loading on the X-Y table of the machining center.

• International Journal of Knowledge Content Development & Technology
• /
• 제9권2호
• /
• pp.91-110
• /
• 2019

This study sought to examine five theses from major journals concerning Korea's Library and Information Science, published from 1970 to 2018, so as to diagnose the current stage of International Research collaboration in the field of Korea's Library and Information Science which researchers from two or more different nations jointly conducted. Furthermore, it proposed measures for activating International Research collaboration in the field of Korea's Library and Information Science. First, related conferences should be held and education need to be offered in terms of elevating the awareness of the need and importance of international research collaboration. Second, relevant policies need to be developed and projects should be implemented to strengthen the practical international research collaboration. Third, collaboration with various countries should be pursued in the area of detailed majors of library and information science of greater diversity than now in terms of the detailed majors and countries. Fourth, a research environment supporting the collaboration with various research institutions overseas moving forward will need to be created around the universities.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권5호
• /
• pp.395-399
• /
• 2023

The knee arthritis patients are generally performed standing position radiography. However, patients with pain caused by degenerative diseases or injuries in the knee have difficulty maintaining a standing position. Therefore, this study aims to develop a knee joint standing weight bearing projection assist device to solve these problems when patients undergo knee radiography due to various diseases. The design of the knee joint weight-bearing radiography assist device is carried out with 3D design and drawing production to secure basic data, electric support and frame manufacture. A fixed device for maintaining the patient's knee standing weight-bearing projection, an electric digital height device, a digital protractor, and a safety device were designed. The arm support is made of PVC with a cushion to relieve the impact and make it easier to remove debris. The digital electric device can be moved up and down according to the patient's height, and a remote control is attached. The safety device is made to be adjustable in size by attaching metal hooks on both sides of the frame and to shield the scrotum. A digital protractor was attached to the side frame to set the desired knee angle. When a self-made assist device was used to perform a knee joint standing weight bearing projection, it helped maintain arm support and lower extremities position. In addition, the height could be adjusted using an assist device during standing projections, which helped the patient maintain the position.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권2호
• /
• pp.229-237
• /
• 2012

In this study, the failure mechanism of sandwich-to-laminate T-joints under pull-off loading was investigated by experiment and the finite element method. A total of 26 T-joint specimens were manufactured and tested in order to investigate the effects of both adhesive thickness (0.4, 2.0, and 4.0 mm) and environmental conditions on the failure of the joints. The results showed that failure occurred mainly as intralaminar failure in the first layer of the sandwich face, which was contacted to the paste adhesive. The failure load did not significantly change with increasing adhesive thickness in both RTD (Room Temperature and Dry) and ETW (Elevated Temperature and Wet) conditions. In the case of ETW conditions, however, the failure load increased slightly with an increase in adhesive thickness. The joints tested in ETW conditions had higher failure loads than those tested in RTD conditions. In addition to the experiment, a finite element analysis was also conducted to investigate the failure of the joint. The stress inside the first ply of the sandwich face was of interest because during the experiment, failure always occurred there. The analysis results showed good agreement with the trend of experimental results, except for the case of the smallest adhesive thickness. The highest stress was predicted in the regions where initial failure was observed in the experiment. The maximum stress was almost constant when the adhesive thickness was beyond 2 mm.

• 수산경영론집
• /
• 제50권4호
• /
• pp.11-28
• /
• 2019

In this study, the Inter-Korea Fisheries Cooperation Project was divided into four categories: North Korea's Fisheries Infrastructure Development Project, Fisheries Cooperation Project, Human Exchange Project, and North Korea Fisheries Investment Project. First, North Korea's fisheries infrastructure development projects include North Korea's fisheries resource research project, it's fisheries resource development project, and joint enforcement on illegal operation of Chinese ships. Second, fisheries cooperation projects include the operation of the North-South common fish area in the West Sea, the fishing project in North Korea's East sea, and the import of North Korean seafood. Third, human exchange projects include training of aquaculture technicians in North Korea, technology transfer and training of fishing vessels, and boarding of North Korea's fisherman in Korean fishing vessels. Fourth, North Korea's fisheries investment projects include aquaculture facilities and aquaculture feed support, aquatic product processing facilities and technology transfer, and fishery equipment support. However, as international sanctions are maintained in the international community to North Korea, Inter-Korea Fisheries cooperation, however, should be promoted according to the level of easing of international sanctions as international sanctions are maintained in the international community to North Korea. First, North Korea's fisheries resource research project, North Korea's fisheries resource creation project, joint enforcement on illegal operation of Chinese ships, and operation of the common fish area in the West Sea can be promoted if international sanctions are maintained at present, promote North Korea's fisheries resource research project. Second, boarding of North Korean's fisherman in Korean fishing vessels, conducting the fishing project in North Korea's East sea, and importing North Korean seafood can be aided if commercial transactions are possible with North Korea. Third, South Korea will support aquaculture facilities and aquatic feed, fisheries processing facilities and technology transfer, fishery equipment support, training of fisheries and aquaculture technicians, fishery fishing technology transfer, and training of fisherman when a comprehensive economic cooperation project is possible with North Korea.

• International Journal of Aerospace System Engineering
• /
• 제5권2호
• /
• pp.1-7
• /
• 2018

This study examines the history of Korean aviation industry and presents the investment strategy based on the evidence and the 4th industrial revolution. Looking at the evolution of the Korean aviation industry and its technological development will be a great help to support industrial and technological innovation in the future. The modern aviation industry is divided into stages of development, focusing on maintenance of equipment introduced in advanced countries, localization through license assembly, production of products based on technology, and international joint development. The development of aeronautics technology has been progressing towards a general improvement of economic efficiency, aircraft safety efficiency through environmental-friendliness, unmanned operation, and downsizing. The Korea Aerospace Research Institute has secured key technologies through development of several aircrafts such as Experimental Aircraft Kachi, EXPO Unmanned Airship, Twin-engine Composite Aircraft, Canard Aircraft, Multi-Purpose Stratosphere unmanned-airship, Medium Aerostats, Smart UAV, Surion, EAV-2H, KC-100, and OPV. The development strategy is discussed at the level of the evidence-based investment strategy that is currently being discussed, and so the investment priorities in aircraft is high. Current drone usage and development direction are not only producing parts using 3D printer, but also autonomous flight, communication (IoT, 5G), information processing (big data, machine learning). Therefore, the aviation industry is expected to lead the fourth industrial revolution.

• 항공우주산업기술동향
• /
• 제6권2호
• /
• pp.3-10
• /
• 2008

이명박 정부는 새로운 과학기술기본계획에서 지식기반경제 시대에 창의적 기초원천연구의 산실인 대학을 세계적 연구개발거점으로 육성하고, 학연 협력을 강화하는 것을 주요 내용으로 포함시키고 있다. 또한 출연(연)의 중장기 연구사업에 대학을 참여시켜 기초원천연구를 강화하고, 대학 출연(연) 공동연구 활성화를 꾀하고 대학과 출연(연) 간 인력 교류 활성화를 위한 법령을 정비하고 있다. 항공우주분야도 타 기술분야와 마찬가지로 대학의 혁신주체로서의 역할이 강조되고 있으며, 따라서 학-연 협력의 필요성이 증대하고 있다. 학연협력의 유형은 공동연구, 석박사인턴십, 교수-연구원 교류, 공동연구센터, 공동대학원 과정 등으로 나누어 볼 수 있으며, 미국, 브라질, 독일, 프랑스, 일본, 한국 등의 사례를 살펴보았다. 학연협력이 성공하기 위해서는 연구주제의 높은 상호의존도, 연구역량에 대한 상호신뢰, 풍부하고 유연한 자원능력이 요구되고 있다.