• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.371-378
• /
• 2018

Internal detonation of a warhead inside a compartment of naval vessel can result in serious blast damages including plastic deformation and rupture of the structural members especially bulkhead due to the huge explosive impact pressure, fragments and high temperature flame. To secure watertight integrity and to prevent the domino-type flooding of neighbouring compartments caused by the rupture of bulkheads, it is necessary to develop the structural design technology of Blast Hardened Bulkheads(BHB) which can resist the blast impact pressure of threatening weapons to increase the survivability of naval vessels. This study dealt with the simplified structural response analysis of BHB under impact pressure of confined explosion and aimed to develop the efficient and rational design method of BHB and joint structures which can be applied at initial design stage. The present 1st report dealt with the phenomena of explosive detonation surveying the preceding experimental/theoretical research and the characteristics of time history of blast pressure including the peak value and duration time were examined. And to predict the large plastic deformation behaviors of BHB by the huge blast pressure reasonably, the plastic hinge method including the membrane effects was formulated. It was applied to the simplified structural design equations. The following report will deal with the application and adjustment process of the structural scantling equations to the actual BHB design and verification of validity of them.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.2059-2066
• /
• 2018

This study explored the feasibility of utilizing an SWCNT-coated fabric sensor for the development of a wearable motion sensing device. The extent of variation in electric resistance of the sensor material was evaluated by varying the fiber composition of the SWCNT-coated base fabrics, attachment methods, number of layers, and sensor width and length. 32 sensors were fabricated by employing different combinations of these variables. Using a custom-built experimental jig, the amount of voltage change in a fabric sensor as a function of the length was measured as the fabric sensors underwent loading-unloading test with induced strains of 30 %, 40 %, and 50 % at a frequency of 0.5 Hz. First-step analysis revealed the following: characteristics of the strain-voltage curves of the fabric sensors confirmed that 14 out of 32 sensors were evaluated as more suitable for measuring human joint movement, as they yield stable resistance values under tension-release conditions; furthermore, significantly stable resistance values were observed at each level of strain. Secondly, we analyzed the averaged maximum, minimum, and standard deviations at various strain levels. From this analysis, it was determined that the two-layer sensor structure and welding attachment method contributed to the improvement of sensing accuracy.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.33-41
• /
• 2021

Feldspar, along with Quartz, are the most frequently produced minerals in Korea; however, the potential value is estimated to be significantly low because of the scarce research on the development and application of material properties, except for their limited use in manufacturing minerals, glass, and paints. In this study, we analyzed the eco-friendly material and reactivity improvement characteristics of weathered feldspar through activation technique. The joint structural features observed on the surface of the weathered feldspar show that the joint arrangements are irregularly distributed, and the cavities are interconnected. Due to the irregularly connected cavities on the surface of weathered feldspar, the reaction area of the weathered feldspar is increased; hence the weathered feldspar is considered as a highly reactive pozzolan material when combined with cement. As a result of applying the thermal, mechanical, and chemical activation techniques to improve the functionality of the weathered feldspar, the cation exchange capacity, density, and uniaxial compression strength characteristics were improved. It is considered that weathered feldspar by these porous characteristics can be used as an eco-friendly construction material with excellent physical and chemical properties.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.321-325
• /
• 2020

The purpose of this study is to re-concept the future battle of the Army, which combines the effects of advanced technology on the concept of combat and the AICBM technology. The "war concept" changes with the times, and can be seen through the following two examples. First, it is a concept that achieves relative superiority by analyzing enemies. A case in point is the U.S. military's development of a "public joint battle" into a "multi-domain operation." Second, it is 'science and technology' that leads to a change in the concept of combat. A case in point is that the firepower warfare on land and sea in World War I developed from World War II to "air warfare" due to the emergence of aircraft. In this regard, the U.S. military is focusing on the concept of fighting in line with the future operational environment based on high-tech science and technology and the construction of the future military through the creation of the "Future Command." Therefore, our military needs to utilize the major technologies of the fourth industrial revolution as an opportunity to develop the concept of future combat, and the future war will greatly affect the development of the concept of advanced science and technology carrying out war, as AIC technology based on the fourth industrial revolution will promote innovation in defense operations in the form of super-connected, super-intelligence and super-integration. Therefore, this study will present the impact of advanced technology on the concept of combat and the concept of battle of the future Army incorporating the technology of AICBM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.954-957
• /
• 2016

In cases of military communication plan, it often requires to find a proper solution for frequency assignment within feasible time. Minimizing the number of used resources are related to cost issue, hence it is a critical objective. When the dual polar antenna is used, the performance can be much developed by exploiting the polarization separation. In this paper, we propose an algorithm that assigns polarizations and frequencies within complexity of $O(N^2)$ based on the graph matching theory. We have verified that the proposed algorithm shows almost twice performance relative to the uni-polar frequency assignment algorithms and it approaches very closely to its theoretical optima.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2868-2875
• /
• 2010

This study was carried out to present a co-brand strategies of medical equipment manufacturers in Wonju city. Based on the result of the analysis, followings were proposed. First, an adequate education and a publicity for the importance of a co-brand are required, and it needs to reinforce the recognition on quality differentiation through a technology development and the importance of quality control. Second, establishing a system to secure the brand reliability and operating a program to monitor the technology development and quality are required. Third, it needs to implement a joint participation with priority for establishing a sales network, advertize and a publicity. Fourth, an alternative may needed in order to maximize the synergy effect of the co-brand project and minimize any possible conflicts among participants. Fifth, securing a reliability is needed to acquire the ability to manage the brand and derive member's active participation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.538-546
• /
• 2015

This paper describes an intelligent ankle assistive robot which provides assistive power to reduce ankle torque based on an analysis of ankle motion and muscle patterns during walking on level and sloped floors. The developed robot can assist ankle muscle power by driving an electric geared motor at the exact timing through the use of an accelerometer that detects gait phase and period, and a potentiometer to measure floor slope angle. A simple muscle assistive link mechanism is proposed to convert the motor torque into the foot assistive force. In particular, this mechanism doesn't restrain the wearer's ankle joint; hence, there is no danger of injury if the motor malfunctions. During walking, the link mechanism pushes down the top of the foot to assist the ankle torque, and it can also lift the foot by inversely driving the linkage, so this robot is useful for foot drop patients. The developed robot and control algorithm are experimentally verified through walking experiments and EMG (Electromyography) measurements.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.473-477
• /
• 2007

Industry for artificial joint is a complex one based on various technologies, including mechanics, biotechnology, material engineering, and medicine which are connected closely. This industry has been already known to a higher value-added business, and as going into an aging society, is expected a market growth. Also, it is a knowledge based component industry and each components assembled into product is almost all import items. This characteristics made many small and medium and venture enterprises participate in this area. For these reasons, it is needed a government's promotion. In this study, commercialization environment was analyzed and then commercialization items and strategies was figured out. Firstly, three factors for need, environment, technology were analyzed and then growth drivers growth restraints were provided. Secondly, items and strategies for commercialization were analyzed based on needs and trends of technology. Commercialization opportunities are expected to be created based on strategies following as; building a integrated technology development system, making a public opinion, strengthening a marketing, entering into niche market, B2B strategies etc.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.443-449
• /
• 2022

With climate change and the global population growth, the frequency and scope of wildfires are constantly increasing, which threatened people's lives and property. For example, according to California Department of Forestry and Fire Protection, in 2020, a total of 9,917 incidents related to wildfires were reported in California, with an estimated burned area of 4,257,863 acres, resulting in 33 fatalities and 10,488 structures damaged or destroyed. At the same time, the ongoing development of technology provides new tools to simulate and analyze the spread of wildfires. How to use new technology to reduce the losses caused by wildfire is an important research topic. A potentially feasible strategy is to simulate and analyze the spread of wildfires through computing technology to explore the impact of different factors (such as weather, terrain, etc.) on the spread of wildfires, figure out how to take preemptive/responsive measures to minimize potential losses caused by wildfires, and as a result achieve better management support of wildfires. In preparation for pursuing these goals, the authors used a powerful computing framework, Spark, developed by the Commonwealth Scientific and Industrial Research Organization (CSIRO), to study the effects of different weather factors (wind speed, wind direction, air temperature, and relative humidity) on the spread of wildfires. The test results showed that wind is a key factor in determining the spread of wildfires. A stable weather condition (stable wind and air conditions) is beneficial to limit the spread of wildfires. Joint consideration of weather factors and environmental obstacles can help limit the threat of wildfires.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.257-264
• /
• 2017

The PC (Precast Concrete) construction method is a technique where concrete members that have been produced in a plant are constructed on site. Thus, continuity and secure integration of a structure that can be obtained by connecting rebars at splicing joint for PC members are the main areas of concern for this method. To evaluate the splicing and bonding performance according to application of a splice sleeve for connecting rebar in this research study, the diameter of rebar, development length, grouting strength etc. were set as variables. The performance and stiffness of splicing according to the development length of grout strength were measured and evaluated. In addition, by conducting comparative analysis on each of the variables, the factors that affected the splice sleeve for connecting rebar were discussed. The results confirmed that the strength and stiffness of the splice sleeve for connecting rebar were significantly affected by the development length while the increase in performance according to grout strength was not as significant.