• 대한수학회논문집
• /
• 제38권4호
• /
• pp.1029-1044
• /
• 2023

The purpose of this paper is to introduce the concept of joint essential numerical spectrum 𝜎_en(·) of q-tuple of operators on a Banach space and to study its properties. This notion generalize the notion of the joint essential numerical range.

• 대한수학회논문집
• /
• 제2권1호
• /
• pp.59-62
• /
• 1987

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1515-1517
• /
• 2008

The purposes of this study were to measure the ranges of motion in knee joint and during continuous passive motion(CPM) treatment and to computationally calculate joint angles at the knee joint dependent on the CPM machine design and its application. Four CPM machines and eleven candidates were recruited for this study. Experimental and numerical studies have been peformed to calculate the range-of-motion of CPM machines. From the experimental measurements, the average range of motions at the knee joint for the CPM machine #1, #2, #3, and #4 were lower than the manufactures suggested values due to improper alignments of the hip and knee joints to the CPM machines. Different design of CPM machine generated different outcomes of the ROM at the knee joints during CPM. The experiments and kinematic simulation in this study could be used to provide useful guidance in the treatment of CPM after joint surgery.

• 한국수자원학회논문집
• /
• 제49권12호
• /
• pp.1035-1044
• /
• 2016

제방과 보의 접속부에서는 복잡한 3차원이 흐름이 발생하여 붕괴가 자주 발생한다. 따라서 연결부에는 일반적인 호안에 비해 큰 안정성을 가진 연결호안의 설치가 필요하다. 그러나 연결호안에 대한 설계기준은 하천설계기준에 제시되어 있지 않기 때문에 연결호안의 공학적인 설계를 위한 연구가 필요하다. 본 연구에서는 연결호안에 사석을 포설하고 사석의 이탈조건을 파악하기위해 유량을 변화시켜가며 실험을 수행하였으며 실험수로는 폭 4 m, 길이 20 m의 직선수로이며 한쪽에만 제방이 설치되어 있다. 연결호안의 사석직경은 0.03 m 이며 유입유량은 $0.5{\sim}0.8m^3/s$이다. 동일한 조건에 대한 수치모의를 수행하여 연결부에 대한 흐름조건 및 제방 비탈면의 전단응력 등의 분포를 통해 영향범위를 파악하였다. 그 결과 연결호안의 경우 일반호안에 비해 사석직경이 4.1~6.9배 크게 산정되는 것으로 나타났으며 사석의 이탈속도가 같아도 유량이 클수록 취약지역의 범위가 하류방향으로 더 길게 발달하는 것으로 나타났다. 본 연구를 통해 연결호안 주변의 수리학적 특성에 따른 사석직경 및 영향범위를 산정하는 방법을 제안하였으며 추후 고수부지의 영향, 다양한 형식의 보와 호안에 대한 실험과 추가적인 검토가 수행된다면 연결호안의 안정성을 확보 할 수 있는 합리적인 설계방법을 제시할 수 있을 것이라고 기대된다.

• Geomechanics and Engineering
• /
• 제28권2호
• /
• pp.117-133
• /
• 2022

Determination of the mechanical behaviour of jointed rock masses has been a challenge for rock engineers for decades. This problem is more pronounced for non-persistent jointed rock masses due to complicated interaction of rock bridges on the overall behaviour. This paper aims to study the effect of a non-persistent joint set configuration on the mechanical behaviour of rock materials under both uniaxial and biaxial compression tests using a discrete element code. The numerical simulation of biaxial compressive strength of rock masses has been challenging in the past due to shortcomings of bonded particle models in reproducing the failure envelope of rock materials. This problem was resolved in this study by employing the flat-joint contact model. The validity of the numerical model was investigated through a comprehensive comparative study against physical uniaxial and biaxial compression experiments. Good agreement was found between numerical and experimental tests in terms of the recorded peak strength and the failure mode in both loading conditions. Studies on the effect of joint orientation on the failure mode showed that four zones of intact, transition to block rotation, block rotation and transition to intact failure occurs when the joint dip angle varies from 0° to 90°. It was found that the applied confining stress can significantly alter the range of these zones. It was observed that the minimum strength occurs at the joint dip angle of around 45 degrees under different confining stresses. It was also found that the joint orientation can alter the post peak behaviour and the lowest brittleness was observed at the block rotation zone.

• 대한물리의학회지
• /
• 제13권1호
• /
• pp.49-62
• /
• 2018

PURPOSE: This study investigated the influence of a specific hip joint exercise program on the characteristics of chronic low back pain (LBP), hip joint range of motion (ROM), and performance level in amateur golfers with LBP. METHODS: The study included 28 adult male amateur golfers with LBP and reduced internal rotation (IR) of the lead side hip joint. Subjects were randomly assigned to an experimental (EG) (n=14) or control group (CG) (n=14). The Numerical Rating Scale score for pain, ROM of the hip joint and trunk rotation, performance parameters for golfing were evaluated. A specific exercise program designed to improve IR of the lead side hip joint was performed by the EG, but not the CG. Post-intervention evaluation was performed and the collected data were analyzed. RESULTS: After the intervention, the severity of LBP was significantly reduced (p<.05) and the IR ROM of the lead side hip joint was significantly increased (p<.01) in the EG. Moreover, the trunk rotation range was significantly increased in the EG (p<.01). The drive distance was significantly difference between the EG and CG (p<.05). CONCLUSION: A specific hip joint exercise program can help to reduce pain level and improve performance level in amateur golfers with LBP and increased IR ROM of the lead side hip joint. A significant increase in ROM of the lead side hip joint reduce LBP and was related to driving distance in the EG.

• 대한수학회논문집
• /
• 제9권4호
• /
• pp.837-846
• /
• 1994

Let A denote a unital normed algebra over a field K = R or C and let e be the identity of A. Given $a \in A$ and $x \in A$ with $\Vert x \Vert = 1$, let $$ V(A, a, x) = {f(ax) : f \in A', f(x) = 1 = \Vert f \Vert}. $$ Then the (Bonsall and Duncan) numerical range of an element $a \in A$ is defined by $$ V(a) = \cup{V(A, a, x) : x \in A, \Vert x \Vert = 1}, $$ where A' denotes the dual of A. In [2], $V(a) = {f(a) : f \in A', f(e) = 1 = \Vert f \Vert}$.

• 산업기술연구
• /
• 제23권A호
• /
• pp.69-81
• /
• 2003

Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.681-687
• /
• 2002

The cumulative, shrinkage plastic strains and their distributions in the weld joint after completion of the welding process determine welding-induced distortion. Although the weldment undergoes many complex physical and metallurgical changes during welding, only the material plastic temperature range and its cooling history below this temperature range influence the [mal state of the cumulative shrinkage plastic strains. In addition, for structural welds, these plastic strains are uniform, except in the arc start and stop regions, along the weld. Therefore, the plastic strain-based "inherent shrinkage model" is effective and accurate to describe welding-induced distortion. This paper presents the theoretical background and numerical verification of this root cause.

• Structural Engineering and Mechanics
• /
• 제77권3호
• /
• pp.383-394
• /
• 2021

Column foot in traditional Chinese timber structures may be subjected to be uplifted due to the lateral load and subsequently reset under the vertical loads. The residual moment of the rocking column foot is the most important parameter representing the mechanical behaviors of column foot, and the simplification of joints is the basis of structural analysis of whole structure. The complicated mechanical behaviors of joint and the modeling of the column foot joint has been undertaken historically based on the experiments and numerical simulation. On the condition of limited application range of those models, a lack of simplified model to represent the mechanical behaviors of joint deserves attentions. There is a great need to undertake theoretical studies to derive the residual moment and make better simplified model of the joint. This paper proposes the residual moment and equivalent simplified model of the rotational stiffness for column foot joint. And, the timber frame is established based on the simplified model, which is verified by solid finite element model. Results show that a mutual agreement on the mechanical behaviors of the timber frame is obtained between the simplified model and the solid finite element model. This study can serve as the references of the structural analysis for the traditional timber structures.