• Title/Summary/Keyword: joint numerical range

Search Result 51, Processing Time 0.026 seconds

JOINT ESSENTIAL NUMERICAL SPECTRUM AND JERIBI ESSENTIAL NUMERICAL SPECTRUM OF LINEAR OPERATORS IN BANACH SPACES

  • Bouthaina Abdelhedi;Wissal Boubaker;Nedra Moalla
    • Communications of the Korean Mathematical Society
    • /
    • v.38 no.4
    • /
    • pp.1029-1044
    • /
    • 2023
  • The purpose of this paper is to introduce the concept of joint essential numerical spectrum 𝜎en(·) of q-tuple of operators on a Banach space and to study its properties. This notion generalize the notion of the joint essential numerical range.

Analysis of Range-of-Motion in Continuous Passive Motion Rehabilitation (무릎관절 재활 운동기기의 운동범위 분석)

  • Park, Won-Man;Kim, Yoon-Hyuk
    • Proceedings of the KSME Conference
    • /
    • 2008.11a
    • /
    • pp.1515-1517
    • /
    • 2008
  • The purposes of this study were to measure the ranges of motion in knee joint and during continuous passive motion(CPM) treatment and to computationally calculate joint angles at the knee joint dependent on the CPM machine design and its application. Four CPM machines and eleven candidates were recruited for this study. Experimental and numerical studies have been peformed to calculate the range-of-motion of CPM machines. From the experimental measurements, the average range of motions at the knee joint for the CPM machine #1, #2, #3, and #4 were lower than the manufactures suggested values due to improper alignments of the hip and knee joints to the CPM machines. Different design of CPM machine generated different outcomes of the ROM at the knee joints during CPM. The experiments and kinematic simulation in this study could be used to provide useful guidance in the treatment of CPM after joint surgery.

  • PDF

An analysis on stability of riprap considering hydraulic characteristics of flow around joint revetment (연결호안 주변 흐름의 수리적 특성을 고려한 사석호안의 안정성 분석)

  • Kim, Sooyoung;Kim, Hyung-Jun;Yoon, Kwang Seok
    • Journal of Korea Water Resources Association
    • /
    • v.49 no.12
    • /
    • pp.1035-1044
    • /
    • 2016
  • In joint portions of the levee and the barrier, complex 3-dimensional flow was generated and collapse of revetment occurred frequently. For these reasons, it is necessary to install the joint revetment with greater stability as compared with the general revetment at the joint portions. However, design criteria for joint revetment was not presented in River Design Criteria (KWRA, 2009). Therefore it is necessary to research for engineering design of the joint revetment. In this study, hydraulic experiments were performed under various flow conditions in order to realize the collapse conditions of riprap and carried out in 20.0 m straight open channel with one side levee and the width was 4.0 m. The diameter of riprap covered around joint revetment was 0.03 m and the inlet discharges were $0.5{\sim}0.8m^3/s$. The numerical simulations were performed under same conditions with experiment. as results of this numerical simulations, the influence range was confirmed from the distribution of flow characteristics and shear stress. As a result, the riprap diameter of the joint revetment was calculated from 4.1 to 6.9 times greater than that of general revetment. As the inlet discharge was large, the range of vulnerable area was developed long in the downstream direction despite of same withdrawal velocity of riprap. Through this study, the methods of calculating the riprap diameter and influence range were proposed according to hydraulic characteristics of flow around joint revetment. At a later study, if additional experiments about effect of flood plane and various types of barrier is applied, it is expected that rational design method with stability of joint revetment can be proposed.

2D numerical study of the mechanical behaviour of non-persistent jointed rock masses under uniaxial and biaxial compression tests

  • Vaziri, Mojtaba Rabiei;Tavakoli, Hossein;Bahaaddini, Mojtaba
    • Geomechanics and Engineering
    • /
    • v.28 no.2
    • /
    • pp.117-133
    • /
    • 2022
  • Determination of the mechanical behaviour of jointed rock masses has been a challenge for rock engineers for decades. This problem is more pronounced for non-persistent jointed rock masses due to complicated interaction of rock bridges on the overall behaviour. This paper aims to study the effect of a non-persistent joint set configuration on the mechanical behaviour of rock materials under both uniaxial and biaxial compression tests using a discrete element code. The numerical simulation of biaxial compressive strength of rock masses has been challenging in the past due to shortcomings of bonded particle models in reproducing the failure envelope of rock materials. This problem was resolved in this study by employing the flat-joint contact model. The validity of the numerical model was investigated through a comprehensive comparative study against physical uniaxial and biaxial compression experiments. Good agreement was found between numerical and experimental tests in terms of the recorded peak strength and the failure mode in both loading conditions. Studies on the effect of joint orientation on the failure mode showed that four zones of intact, transition to block rotation, block rotation and transition to intact failure occurs when the joint dip angle varies from 0° to 90°. It was found that the applied confining stress can significantly alter the range of these zones. It was observed that the minimum strength occurs at the joint dip angle of around 45 degrees under different confining stresses. It was also found that the joint orientation can alter the post peak behaviour and the lowest brittleness was observed at the block rotation zone.

Immediate Effect of Hip Joint Exercise Program on Low Back Pain and Performance Level in Amateur Golfers with Chronic Low Back Pain (고관절 운동 프로그램이 만성 요통이 있는 아마추어 골퍼의 통증과 골프수행 수준에 미치는 즉각적인 효과)

  • Jang, Se-Hee;Kim, Suhn-Yeop
    • Journal of the Korean Society of Physical Medicine
    • /
    • v.13 no.1
    • /
    • pp.49-62
    • /
    • 2018
  • PURPOSE: This study investigated the influence of a specific hip joint exercise program on the characteristics of chronic low back pain (LBP), hip joint range of motion (ROM), and performance level in amateur golfers with LBP. METHODS: The study included 28 adult male amateur golfers with LBP and reduced internal rotation (IR) of the lead side hip joint. Subjects were randomly assigned to an experimental (EG) (n=14) or control group (CG) (n=14). The Numerical Rating Scale score for pain, ROM of the hip joint and trunk rotation, performance parameters for golfing were evaluated. A specific exercise program designed to improve IR of the lead side hip joint was performed by the EG, but not the CG. Post-intervention evaluation was performed and the collected data were analyzed. RESULTS: After the intervention, the severity of LBP was significantly reduced (p<.05) and the IR ROM of the lead side hip joint was significantly increased (p<.01) in the EG. Moreover, the trunk rotation range was significantly increased in the EG (p<.01). The drive distance was significantly difference between the EG and CG (p<.05). CONCLUSION: A specific hip joint exercise program can help to reduce pain level and improve performance level in amateur golfers with LBP and increased IR ROM of the lead side hip joint. A significant increase in ROM of the lead side hip joint reduce LBP and was related to driving distance in the EG.

JOINT NUMERICAL RANGES IN NON UNITAL NORMED ALGEBRAS

  • Yang, Young-Oh
    • Communications of the Korean Mathematical Society
    • /
    • v.9 no.4
    • /
    • pp.837-846
    • /
    • 1994
  • Let A denote a unital normed algebra over a field K = R or C and let e be the identity of A. Given $a \in A$ and $x \in A$ with $\Vert x \Vert = 1$, let $$ V(A, a, x) = {f(ax) : f \in A', f(x) = 1 = \Vert f \Vert}. $$ Then the (Bonsall and Duncan) numerical range of an element $a \in A$ is defined by $$ V(a) = \cup{V(A, a, x) : x \in A, \Vert x \Vert = 1}, $$ where A' denotes the dual of A. In [2], $V(a) = {f(a) : f \in A', f(e) = 1 = \Vert f \Vert}$.

  • PDF

Analysis of Deformation Behavior of Underground Caverns in a Discontinuous Rock Mass Using the Distinct Element Method (개별요소법을 이용한 불연속 암반내 지하공동의 변형 거동 해석)

  • Jung, Wan-Kyo;Lim, Han-Uk
    • Journal of Industrial Technology
    • /
    • v.23 no.A
    • /
    • pp.69-81
    • /
    • 2003
  • Numerical analysis is important for the design, construction and maintenance of large caverns. The rock mass contains generally discontinuities such as faults, joints and fissures. The mechanical behavior and geometric characteristics of these discontinuities would have a significant impact on the stability of the caverns. In this research the Distinct Element Method(DEM) was used to analyze the structural stability of the large cavern. The Barton-Bandis Joint Model (B-B J.M) was used as a constitutive model for the joint. In addition, two different cases 1) analysis with a support system and 2) analysis with no support system, were analyzed to optimize a support system and to investigate reinforcing effects of a support system. The most significant parameters of in-situ stress, JRC of in-situ natural joints, and spatial distribution characteristics of discontinuities were acquired through field investigation. Displacement (horizontal, joint shear), maximum joint opening, maximum and minimum principal stresses, range of relaxed zone, rockbolt axial forces and shotcrete stresses were calculated at each excavation stage. As a result of analysis the calculated values proved to be under the allowable value Rockbolts also proved to be an efficient support measure to control joint shear displacement which had significant effects on extending the relaxed zone. As a consequence, the structural stability of the cavern was assured with an appropriate support system.

  • PDF

FIND THE ROOT CAUSE OF WELDING-INDUCED DISTORTION BY NUMERICAL MODELING METHOD

  • Tsai, Chon L.
    • Proceedings of the KWS Conference
    • /
    • 2002.10a
    • /
    • pp.681-687
    • /
    • 2002
  • The cumulative, shrinkage plastic strains and their distributions in the weld joint after completion of the welding process determine welding-induced distortion. Although the weldment undergoes many complex physical and metallurgical changes during welding, only the material plastic temperature range and its cooling history below this temperature range influence the [mal state of the cumulative shrinkage plastic strains. In addition, for structural welds, these plastic strains are uniform, except in the arc start and stop regions, along the weld. Therefore, the plastic strain-based "inherent shrinkage model" is effective and accurate to describe welding-induced distortion. This paper presents the theoretical background and numerical verification of this root cause.

  • PDF

Study on the mechanical behaviors of timber frame with the simplified column foot joints

  • Yang, Qing-shan;He, Jun-xiao;Wang, Juan
    • Structural Engineering and Mechanics
    • /
    • v.77 no.3
    • /
    • pp.383-394
    • /
    • 2021
  • Column foot in traditional Chinese timber structures may be subjected to be uplifted due to the lateral load and subsequently reset under the vertical loads. The residual moment of the rocking column foot is the most important parameter representing the mechanical behaviors of column foot, and the simplification of joints is the basis of structural analysis of whole structure. The complicated mechanical behaviors of joint and the modeling of the column foot joint has been undertaken historically based on the experiments and numerical simulation. On the condition of limited application range of those models, a lack of simplified model to represent the mechanical behaviors of joint deserves attentions. There is a great need to undertake theoretical studies to derive the residual moment and make better simplified model of the joint. This paper proposes the residual moment and equivalent simplified model of the rotational stiffness for column foot joint. And, the timber frame is established based on the simplified model, which is verified by solid finite element model. Results show that a mutual agreement on the mechanical behaviors of the timber frame is obtained between the simplified model and the solid finite element model. This study can serve as the references of the structural analysis for the traditional timber structures.