• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.65-72
• /
• 2018

The purpose of this study was to assess the intra-tester and inter-tester reliability and validity of elbow flexion range of motion using a smart phone used by the general public. Thirty-one general people participated in this study. The range of motion in active elbow flexion was measured with a goniometer and smart phone over two times by two observers. The intra-taster and inter-tester reliability were evaluated using the intraclass correlation coefficient(ICC). The validity was measured by Pearson's correlation coefficient. The intra-observer reliability was good in all measured items ICC>0.900. The inter-observer reliability was high with ICC>0.806. All correlation coefficients of android app and goniometer were greater than 0.868 and showed a significant positive correlation (p<0.01). The range of motion measurement with a smart phone showed acceptable reliability. Therefore, using a smartphone to measure the range of motion of the elbow joint could provide convenience and economic benefits.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1621-1624
• /
• 2003

This paper presents a new method that generates a path that has no collision with the obstacles or the characters by using the three motion parameters, and automatically creates natural motions of characters that are confined to the path. Our method consists of three parameters: the joint information parameter, the behavior information parameter, and the environment information parameter. The joint information parameters are extracted from the joint angle data of the character and this information is used when creating a path following motion by finding the relation-function of the parameters on each joint. A user can set the behavior information parameter such as velocity, status, and preference and this information is used for creating different paths, motions, and collision avoidance patterns. A user can create the virtual environment such as road and obstacle, also. The environment is stored as environment information parameters to be used later in generating a path without collision. The path is generated using Hermit-curve and each control point is set at important places.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.29 no.3
• /
• pp.23-30
• /
• 2023

Background: The purpose of this study was to investigate the effects of joint mobilization and muscle strengthening exercises on neck function, range of motion, and muscle tone in patients with forward head posture. Methods: A total 32 subjects were divided into muscle strengthening exercise (n=16) and joint mobilization (n=16) who met the diagnostic criteria for the forward head posture, and the study method used the neck disability index (NDI) and BPM Pro to compare the range of motion. Results: As a result of the study, there was no significant difference between each group, and when looking at the differences before and after each group, there was a significant difference in neck pain in both groups. There was a significant difference in muscle tension in the joint mobilization group, but there was no significant difference in the muscle strengthening exercise group. In the range of joint mobilization, there was a significant difference in the range of left joint mobilization of the joint mobilization group, there was no significant difference in the range of right joint mobilization, and there was no significant difference in the range of joint mobilization of the muscle strengthening exercise group. Conclusion: The above results revealed that joint mobilization and muscle strengthening exercises were effective on neck function, range of motion, and muscle tone in forward head posture patients.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.154-160
• /
• 2019

In this paper, we propose the miniaturization size of wearable Range of Motion(ROM) and a system that can be connected with smart devices in real-time to measure the joint movement range dynamically. Currently, the ROM of the joint is directly measured by a person using a goniometer. Conventional methods are different depending on the measurement method and location of the measurement person, which makes it difficult to measure consistently and may cause errors. Also, it is impossible to measure the ROM of joints in real-life situations. Therefore, the wearable sensor is attached to the joint to be measured to develop a miniaturize size ROM device that can measure the range of motion of the joint in real-time. The sensor measured the resistance value changed according to the movement of the joint using a load cell. Also, the sensed analog values were converted to digital values using an Analog to Digital Converter(ADC). The converted amount can be transmitted wireless to the smart device through the wearable sensor node. As a result, the developed device can be measured more consistently than the measurement using the goniometer, communication with IoT-based smart devices, and wearable enables dynamic observation. The developed wearable sensor node will be able to monitor the dynamic state of rehabilitation patients in real-time and improve the rapid change of treatment method and customized treatment.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.6
• /
• pp.583-595
• /
• 2015

Objective: The purpose of this study was to determine the reliability of lower limb joint angles computed with the software ImageJ during jumping movements. Background: Kinematics is the study of bodies in motion without regard to the forces or torques that may produce the motion. The most common method for collecting motion data uses an imaging and motion-caption system to record the 2D or 3D coordinates of markers attached to a moving object, followed by manual or automatic digitizing software. Above all, passive optical motion capture systems (e.g. Vicon system) have been regarded as the gold standards for collecting motion data. On the other hand, ImageJ is used widely for an image analysis as free software, and can collect the 2D coordinates of markers. Although much research has been carried out into the utilizations of the ImageJ software, little is known about their reliability. Method: Seven healthy female students participated as the subject in this study. Seventeen reflective markers were attached on the right and left lower limbs to measure two and three-dimensional joint angular motions. Jump performance was recorded by ten-vicon camera systems (250Hz) and one digital video camera (240Hz). The joint angles of the ankle and knee joints were calculated using 2D (ImageJ) and 3D (Vicon-MX) motion data, respectively. Results: Pearson's correlation coefficients between the two methods were calculated, and significance tests were conducted (${\alpha}=1%$). Correlation coefficients between the two were over 0.98. In Vicon-MX and ImageJ, there is no systematic error by examination of the validity using the Bland-Altman method, and all data are in the 95% limits of agreement. Conclusion: In this study, correlation coefficients are generally high, and the regression line is near the identical line. Therefore, it is considered that motion analysis using ImageJ is a useful tool for evaluation of human movements in various research areas. Application: This result can be utilized as a practical tool to analyze human performance in various fields.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.24-32
• /
• 2012

Of many approaches to reduce motion analysis errors, the compensation method of anatomical landmarks estimates the position of anatomical landmarks during motion. The method models the position of anatomical landmarks with joint angle or skin marker displacement using the data of the so-called dynamic calibration in which anatomical landmark positions are calibrated in ad hoc motions. Then the anatomical landmark positions are calibrated in target motions using the model. This study applies the compensation methods with joint angle and skin marker displacement to three lower extremity motions (walking, sit-to-stand/stand-to-sit, and step up/down) in ten healthy males and compares their performance. To compare the performance of the methods, two sets of kinematic variables were calculated using different two marker clusters, and the difference was obtained. Results showed that the compensation method with skin marker displacement had less differences by 30~60% compared to without compensation. And, it had significantly less difference in some kinematic variables (7 of 18) by 25~40% compared to the compensation method with joint angle. This study supports that compensation with skin marker displacement reduced the motion analysis STA errors more reliably than with joint angle in lower extremity motion analysis.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.2 no.1
• /
• pp.39-49
• /
• 1996

The techniques of joint mobilization and traction are used to improve joint mobility or to decrease pain by restoring accessory movements to the shoulder joints and thus allowing full, nonrestriced, pain-free range of motion. In the glenohumeral joint, the humeral head would be the convex surface, while the glenoid fossa would be the concave surface. The medial end of the clavicle is concave anterioposteriorly and convex superioinferiorly, the articular surface of the sternum is reciprocally curved. The acromioclavicular joint is a plane synovial joint between a small convex facet on lateral end of the clavicle and a small concave facet on the acromion of the scapula. The relationship between the shape of articulating joint surface and the direction of gliding is defined by the convex-concave rule. If the concave joint surface is moving on a stationary convex surface, gliding occur in the same direction as the rolling motion. If the convex surface is moving on a stationary concave surface, gliding will occur in an opposite direction to rolling. Hypomobile shoulder joint are treated be using a gliding technique.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.311-322
• /
• 2015

Objective : The purpose of this study was to investigate the effects of landing height and knee joint muscle fatigue on the movement of the lower extremity during cutting after landing. Method : Subjects included 29 adults (age: $20.83{\pm}1.56years$, height: $172.42{\pm}9.51cm$, weight: $65.07{\pm}10.18kg$). The subjects were asked to stand on their dominant lower limb on jump stands that were 30 and 40 cm in height and jump from each stand to land with the dominant lower limb on a force plate making a side step cutting move at a $45^{\circ}$ angle with the non-dominant lower limb. The fatigue level at 30% of the knee extension peak torque using an isokinetic dynamometer. Results : The results showed that the difference of landing height increased maximum range of motion and angular velocity of hip, knee, and ankle joints in the sagittal plane, and in the angular velocity of motion of the hip joint in the sagittal plane. The maximum range of motion of the knee joint in the sagittal plane and the frontal plane decreased on landing from both heights after the fatigue exercise. The angular velocity of the hip joint in the sagittal plane, and the maximum range of motion of the hip joint in the transverse plane decreased for both landing heights after the fatigue exercise. The angular velocity of the hip joint in the frontal plane decreased for the 30 cm landing height after the fatigue exercise. On the other hand, the angular velocity and maximum range of motion of the ankle joint in the sagittal plane for both landing heights, and the angular velocity and maximum range of motion of the ankle joint in the frontal plane increased on landing from the 40 cm height after the fatigue exercise. Conclusion : Different landing heights of 30 and 40 cm and 30% fatigue of peak torque of knee extensor found a forefoot and stiff landing strategy, when cutting after landing. These results might be due to decline in the shock absorption capability of the knee joint and the movement capability related to cutting while increasing the contribution of the ankle joint, which may cause increased ankle joint injuries.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.30 no.1
• /
• pp.51-60
• /
• 2024

Background: Ankle sprains are a common clinical ankle disorder and alternations in tibiofibular joint biomechanics along with the talus are thought to contribute to its occurrence. During ankle joint dorsi flexion, proper movement requires the talus to glide posteriorly. Due to the wider front of the talus head, achieving the end range of dorsi flexion necessitates both superior and posterior glide of the distal fibula and anterior glide of the proximal fibula. The purpose of this study was to investigate the effects of tibiofibular joint mobilization on pain, range of motion, and balance in patients with lateral ankle sprains. Methods: Participants were randomly assigned to a control group (n=33) or an experimental group (n=31). Both groups underwent ankle joint mobilization three times a week for two weeks. Additionally, the experimental group received proximal and distal tibiofibular joint mobilization three times a week for two weeks. Measurements were obtained pre-intervention and post-intervention (after 2 weeks). Results: Evaluation parameters included the visual analog scale score (VAS), range of motion (ROM), and one-leg standing test (OLS). Post-intervention, both groups demonstrated significantly improved results for all assessments (p<.01). A significant intergroup difference was observed only in the ROM (p<.01) and OLS (p<.05). Conclusion: Our findings suggest that tibiofibular joint mobilization, combined with ankle joint mobilization, may be beneficial in enhancing outcomes for individuals with lateral ankle sprains.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.11 no.1
• /
• pp.30-38
• /
• 2005

Purpose: The purpose of this study was to testify effects of Balance Taping Therapy on the pain and range of motion of the knee joint in the female elderly with degenerative knee arthritis. Method: The research design was one group pretest-posttest design. The data were collected from November 15 to December 25, 2004. The subjects were 23 female elderly with degenerative knee arthritis who were registered at one public health center in Busan. Balance Taping Therapy was conducted twice a week for 5 weeks. The data were analyzed such as the number, percentage, paired t-test, Kolmogorov-Smirnov test using SPSS 10.0 WIN Program. Result: The pain in the female elderly with degenerative knee arthritis significantly decreased from 8.82 to 6.04 after Balance Taping Therapy(t=16.781, p=0.001). The knee flexion joint range of motion in the female elderly with degenerative knee arthritis significantly increased from 119.73 to 123.13 after Balance Taping Therapy (t=-6.003, p=0.001). The knee extention joint range of motion statistically significantly increased from 112.74 to 117.83 after Balance Taping Therapy(t=-8.940, p=0.001). Conclusion: Balance Taping Therapy proved an effective nursing intervention in decreasing pain and increasing the range of motion of the knee joint in the female elderly with degenerative knee arthritis.