• Steel and Composite Structures
• /
• 제6권1호
• /
• pp.33-53
• /
• 2006

The rotational behaviour of bolted extended end plate beam-to-column connections is evaluated in the context of the component method. The full moment-rotation response is characterized from the force-deformation curve of the individual joint components. The deformability of end plate connections is mostly governed by the bending of the column flange and/or end plate and tension elongation of the bolts. These components form the tension zone of the joint that can be modelled by means of "equivalent T-stubs". A systematic analytical procedure for characterization of the monotonic force-deformation behaviour of individual T-stub connections is proposed. In the framework of the component method, the T-stub is then inserted in the joint spring model to generate the moment-rotation response of the joint. The procedures are validated with the results from an experimental investigation of eight statically loaded extended end plate bolted moment connections carried out at the Delft University of Technology. Because ductility is such an important property in terms of joint performance, particularly in the partial strength joint scenario, special attention is given to this issue.

• 터널과지하공간
• /
• 제7권1호
• /
• pp.20-30
• /
• 1997

A discrete joint finite element with joint surface degradation was developed to investigate the shear behavior of rough rock joint. Isoparametric formulation was used for facilitating the implementation of the element in existing Finite Element Codes. The elasto-plastic joint deformation model with the discontinuity constitutive law proposed by Plesha was applied to the element. The reliability of the developed finite element code was successfully testified through numerical direct shear tests conducted under both constant normal stress and constant normal displacement conditions. The result of the numerical direct shear test showed that the code can capture characteristic deformation features envisaged in the direct shear test of rough rock joint.

• 터널과지하공간
• /
• 제4권3호
• /
• pp.261-273
• /
• 1994

Direct shear tests were carried out on the rock joints and artificial discontinuities to investigate the influence of joint roughness on the shear strength and deformation behaviour. Single direct shear testing apparatus used in experiment was designed and manufactured. Its capacity is 200 tons of shear load, 20 tons of normal load and 50$\textrm{cm}^2$ of maximum shear area. Test samples were cement mortar with artificial discontinuity and sandstone with natural joint. Peak shear strength was increased as joint roughness or normal stress was increased, especially, linearly increased with roughness angle in cement mortar. If joint roughness angle was constant at low normal stress, shear strength was not affected by width and height of joint roughness in cement mortar. Peak shear strengths obtained from tests were larger than the values calculated by Barton's equation, and shear stiffness was increased with joint roughness coefficient.

• 터널과지하공간
• /
• 제16권4호
• /
• pp.313-325
• /
• 2006

본 연구에서는 이방성 암반의 방향성 및 측압조건이 터널 변형거동에 미치는 영향을 조사하기 위하여 서로 다른 15가지 이방성 터널 모형에 대해 축소모형실험을 실시하였다. 이를 위해 모래 석고 물의 중량비를 달리한 모형재료에 대한 물성 실험을 통하여 모형재료의 특성을 연구하였다. 대부분의 이방성 터널 모형은 응력이 집중되는 곳에서 전단파괴 현상을 보였으며 절리면을 따라 미끄러짐이 발생하여 절리면의 경사 방향이 터널 변형거동에 큰 영향을 미친 것으로 나타났다. 절리 경사가 $30^{\circ}$보다 작은 모형에서는 반팽창현상이 두드러지게 나타났으며 절리경사가 $50^{\circ}$인 모형은 측압조건에 관계없이 수직 및 수평 내공변위가 가장 작게 나타나 실험된 모형중에서 가장 안정적인 모형으로 판단된다. 또한 모형터널의 파괴 및 변형양상은 측압계수 조건에 따라 매우 상이하게 나타났다.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.611-621
• /
• 2019

Precast concrete structure has many advantages, but the assembled seam will affect potentially the overall seismic performance of structure. Based on the sidewall joint located in the bottom of assembled monolithic subway station, the main objectives of this study are, on one hand to present an experimental campaign on the seismic behavior of precast sidewall joint (PWJ) and cast-in-place sidewall joint (CWJ) subjected to low-cycle repeated loading, and on the other hand to explore the effect of shape and position of assembled seam on load carrying capacity and crack width of precast sidewall joint. Two full-scale specimens were designed and tested. The important index of failure pattern, loading carrying capacity, deformation performance and crack width were evaluated and compared. Based on the test results, a series of different height and variably-shape of assembled seam of precast sidewall joint were considered. The test and numerical investigations indicate that, (1) the carrying capacity and deformation capacity of precast sidewall and cast-in-place sidewall were very similar, but the crack failure pattern, bending deformation and shearing deformation in the plastic hinge zone were different obviously; (2) the influence of the assembled seam should be considered when precast underground structures located in the aquifer water-bearing stratum; (3) the optimal assembled seam shape and position can be suggested for the design of precast underground concrete structures according to the analysis results.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.69-74
• /
• 2013

According to the axial torsion applied at power transmission and the vibration from the roughness of road surface, this paper analyzes the stresses on two kinds of universal joint model. As stress and deformation at model 2 becomes smaller than model 1 on structural analysis, model 2 is more stabilized than model 1. The natural frequencies at model 1 and 2 are 7,040 and 9,540 Hz respectively. As the natural frequency range of model 2 becomes higher than model 1, model 2 becomes safer than model 1. Critical frequencies at these models are calculated through harmonic response analyses. On critical frequencies at model 1 and 2, the stress at model 2 becomes lower than 2 times as much as model 1 and the deformation at model 2 becomes lower than 4 times as much as model 1. Model 2 on durability is thought to become better than model 1. This study result is applied with the design of safe universal joint and it can be useful to improve the durability by predicting prevention against the deformation due to its vibration.

• 한국공간구조학회논문집
• /
• 제7권6호
• /
• pp.53-60
• /
• 2007

스페이스프레임의 볼 조인트 접합부에서는 축부에 핀의 삽입을 위한 구멍이 존재하기 때문에 응력집중으로 인한 취성파단의 우려가 있다. 따라서 접합부에서의 변형능력이나 에너지흡수능력은 낮은 편이다. 본 연구에서는 볼 조인트 접합부의 소성변형능력을 향상시키기고 현장에서 발생할 수 있는 시공오차의 흡수가 가능하도록, 볼트의 나사부나 핀부의 취성파단 없이 감소된 축부에서 소성변형능력이 기대되는 새로운 접합상세를 개발하였으며 수치해석과 실험을 통해 그 성능을 검증하고자 하였다. 수치해석과 실험을 통하여 볼트의 축부 및 핀부의 단면을 조절함으로써 기존 고력볼트보다 소성변형능력이 향상됨을 확인할 수 있었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.115-121
• /
• 2003

Discrete joint network approach has widely been used to investigate the hydraulic behavior of jointed rock masses. In general, joints will undergo deformation due to stress redistribution induced by construction of underground openings, hence joint aperture is often assumed to have a probability distribution rather than to be a constant value. In real situations, however, it is more reasonable to take into account the effect of stress change on aperture values by calculating joint deformation. In this report, a mechanical process has been developed to determine the joint opening or closure based on a statistically generated joint network model. By performing numerical analyses, some significant results on the hydro-mechanical behavior of jointed rock masses have been summarized.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권4호
• /
• pp.225-233
• /
• 2003

최근 성능에 근거한 설계법의 개발과 더불어, 변위설계에 대한 관심이 증가하고 있다. 본 연구에서는 다층 RC 골조의 변위성능을 보다 정확하게 평가할 수 있는 방법을 제시하고자 한다. 이를 위해, 골조의 횡변위를 계산하기 위해서 보와 기둥의 변형뿐만 아니라 정착부와 조인트 부분의 변형을 변위 산정시 고려하였다. 기존의 실험 및 계산결과의 비교로부터, 본 연구에서 제시한 방법의 적합성을 확인하였고, 이를 강한 기둥-약한 보의 설계개념을 설계된 다층 RC골조 건물에 적용하여 그 거동을 예측하였다. 그 결과, 보다 정확한 건물의 변위성능을 평가하기 위해서는 정착부와 조인트의 변형을 반드시 반영하여야 하는 것으로 나타났다.

• 한국지진공학회논문집
• /
• 제13권2호
• /
• pp.29-36
• /
• 2009

본 연구는 철근콘크리트 내부 보-기둥 접합부의 전단거동 예측에 관한 비선형 모델을 제안한 것이다. 보-기둥 접합부 패널존에서의 전단거동 모델을 위하여 면내전단 예측을 위한 연화트러스모델 이론을 수정한 이론을 적용하였다. 이로부터 접합부에서의 평형조건에 의한 등가 모멘트 및 회전 관계를 이용하여 접합부에서의 전단변형 관계를 접합부의 회전스프링의 특성관계로 변환하여 고려토록 하였다. 소개된 해석모델을 축력 및 전단을 받는 내부 철근콘크리트 보-기둥 접합부의 실험과 비교하였으며, 제시된 모델은 접합부에서의 전단력 뿐만 아니라 전단변형의 예측에도 유효한 것으로 판단되었다.