• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.107-113
• /
• 2009

In this paper, we studied of measurement the vibration of natural frequency using optical fiber sensor. The boring bar for measurement of vibration in use optical fiber sensor has the advantage of direct measure for the frequency than accelerometer. Because it deal with output value on electrical signal of optical fiber in physical disturbance when it measures the frequency of vibration. The optical fiber sensor measured the vibration of boring bar by the gap in sensing jig while optical fiber just kept contact with boring bar. A prototype system was composed of jig part with gap and optical system part. In this paper, we found out the possibility to measurement of vibration by the gap in use optical fiber.

• 한국세라믹학회지
• /
• 제44권5호
• /
• pp.184-189
• /
• 2007

In this study, a novel-processing route for producing microcellular cordierite ceramics has been developed. The proposed strategy for making the microcellular cordierite ceramics involves three steps: (i) fabricating ceramic-filled preceramic foams by heating a mixture of polysiloxane, expandable microspheres, talc, and alumina in a mold, (ii) cross-linking the foamed body, and (iii) transforming the body into microcellular cordierite ceramics by sintering. Cu jig was used for near net shaping in the foaming step. The experimental variables such as the shape of foaming jig and the content of expendable microsphere were investigated. By controlling the content of expendable microsphere, it was possible to make the porous cordierite ceramics with cell density of ${\sim}1.0{\times}10^9\;cells/cm^3$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.644-647
• /
• 2004

RF 시스템에서 발룬(Balun)은 회로기판과 집적회로 사이의 임피던스 매칭에 사용되는 소자로서, 전력의 균등한 분배와 함께 180도 위상차를 만드는 역할을 하는 주요 회로부품이다. 시스템의 요구사양에 따라 balanced 임피던스가 $50\Omega$인 소자뿐만 아니라, 25 또는 100, $200\Omega$인 소자들도 많이 사용되는데, 대부분의 계측기가 $50\Omega$을 I/O 임피던스로 설정하고 있어, balanced 임피던스가 $50\Omega$이 아닌 경우 특성을 측정하기 위해서는 별도의 지그설계가 필요하다. 본 연구에서는 중심주파수가 900MHz이고, balanced 임피던스가 $100\Omega$이며, LTCC 모듈 내에 내장되는 임베디드 발룬의 최적 평가를 위한 PCB 측정지그의 구조에 대하여 설계 및 시뮬레이션을 실시하고, 이에 따라 제작된 지그를 시뮬레이션 결과와 비교하였다. 지그를 구성하는 마이크로스트림의 임피던스를 조절함으로써 유효한 측정주파수범위를 넓힐 수 있었으며, 제작된 지그는 설계치에 거의 근접한 전송특성을 나타내었다.

• 한국산업정보학회논문지
• /
• 제26권6호
• /
• pp.11-16
• /
• 2021

본 논문에서는 자동차 배선에 사용되는 커넥터의 조립 불량 상태를 식별하는 품질 검사 시스템을 개발하였다. 방수용 커넥터는 방수를 위하여 내부 Seal을 필수적으로 삽입하여야 하는데 생산 과정에서 누락되거나 이중 삽입되는 경우가 있다. 이를 구분하기 위하여 포토센서와 터치스위치를 사용하여 자동화 검사 지그를 설계하였다. 기존 육안검사의 경우 5인이 하루 8시간 검사하였을 때 6,400개의 커넥터를 검사하였으나 개발된 검사 지그를 사용할 때는 20,000개를 검사하므로 기존의 육안 검사와 비교하여 생산성이 크게 향상되었다.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.28-33
• /
• 2022

A pipe is a hollow, long-form part that is primarily used to transport fluids, such as liquids or gases. Pipes are used in a range of applications in different fields from mechanical purposes to architecture and electrical uses. Despite the significance owing to various usability of pipes, few studies have been conducted using the physical property test method. The tensile test is widely used as a method to check the physical properties of the pipe. The existing pipe tension test contains the possibility to cause errors, which are fractures outside the gauge distance and cross-sectional deformation of the pipe. In this study, a novel pipe tension test method using a jig is presented and pipes with various materials are tested. It is expected that the proposed method can reduce errors that occur in conventional pipes and also obtain more accurate values to enable more efficient testing.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2022

In this study, vibration analysis of washing machine dehydration was carried out using laser sensors. The suspension of the washing machine was attached to a jig developed for this study. In addition, 10 laser sensors were attached to the jig. The channels of each laser sensor are composed of five channels: front, rear, left, right, and upper. Data acquisition equipment was used to obtain sensor data. The measured data were processed using signal processing, and interpolation of the data was performed using MATLAB with robust interpolation. Vibration analysis according to unbalanced mass and sensor attachment points was carried out.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• Journal of Korean Dental Science
• /
• 제12권1호
• /
• pp.13-19
• /
• 2019

Purpose: The aim of this study was to compare the flexural strength of provisional fixed dental prostheses which was three-dimensional (3D) printed by several build directions. Materials and Methods: A metal jig with two abutment teeth and pontic space in the middle was fabricated. This jig was scanned with a desktop scanner and provisional restoration was designed on dental computer-aided design program. On the preprocessing software, the build angles of the restorations were arranged at $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ and support was added and resultant structure was sliced to a thickness of $100{\mu}m$. Processed restorations were printed with digital light processing type 3D printer using poly methyl meta acrylate-based resin. After washing and post-curing, compressive loading was applied at a speed of 1 mm/min on a metal jig fixed to a universal testing machine. The maximum pressure at which fracture occurred was measured. For the statistical analysis, build direction was set as the independent variable and fracture strength as the dependent variable. One-way analysis of variance and Tukey's post hoc analysis was conducted to compare fracture strength among groups (${\alpha}=0.05$). Result: The mean flexural strength of provisional restoration 3D printed with the build direction of $0^{\circ}$ was $1,053{\pm}168N$; it was $1,183{\pm}188N$ at $30^{\circ}$, $1,178{\pm}81N$ at $45^{\circ}$, $1,166{\pm}133N$ at $60^{\circ}$, and $949{\pm}170N$ at $90^{\circ}$. The group with a build direction of $90^{\circ}$ showed significantly lower flexural strength than other groups (P<0.05). The flexural strength was significantly higher when the build direction was $30^{\circ}$ than when it was $90^{\circ}$ (P<0.01). Conclusion: Among the build directions $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ set for 3D printing of fixed dental prosthesis, an orientation of $30^{\circ}$ is recommended as an effective build direction for 3D printing.

• 접착 및 계면
• /
• 제22권3호
• /
• pp.85-90
• /
• 2021

섬유강화 복합재료를 이용하여 다양한 제품을 개발하고 있다. 제품화를 위해서는 기본적으로 복합재료의 인장강도 평가를 진행해야 한다. ASTM D3039 규격을 기반으로 섬유강화 복합재료가 평가되는데, 인장시편에 대한 변수 및 평가 조건에 따른 변수가 섬유강화 복합재료의 인장강도에 변화를 유발시킨다. 본 연구에서는 섬유강화 복합재료의 인장강도를 평가하는 ASTM D3039 기준을 따라 실험을 하되 탭, 시편의 두께, 탭을 붙이기 위한 접착제의 종류, 지그의 압력에 따른 섬유강화 복합재료의 인장강도 결과의 변화를 확인하였다. 시편의 두께에 따라 인장강도 및 인장탄성률의 변화가 있었다. 시편의 두께는 1-1.5 mm이 최적이며, 지그의 압력은 0.28 MPa, 탭을 붙이는 접착제는 접착력이 가장 우수한 구조용 접착제를 사용하는 것이 효과적이었다. 다양한 실험적 변수로 인해 오류를 일으킬 수 있었다. 접착제 및 탭, 지그 등에 대한 정확한 설정을 통해 효과적인 복합재료 평가가 이루어지길 희망한다.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.23-29
• /
• 2021

The specific strength of magnesium alloy is four times that of iron and 1.5 times that of aluminum. For this reason, its use is increasing in the transportation industry which is promoting weight reduction. At room temperature, magnesium alloy has low formability due to Hexagonal closed packed (HCP) structure with relatively little slip plane. However, as the molding temperature increases, the formability of the magnesium alloy is greatly improved due to the activation of other additional slip systems, and the flow stress and elongation vary greatly depending on the temperature. In addition, magnesium alloys exhibit asymmetrical behavior, which is different from tensile and compression behavior. In this study, a jig was developed that can measure the plane deformation behavior on the surface of a material in tensile and compression tests of magnesium alloys in warm temperature. A jig was designed to prevent buckling occurring in the compression test by applying a certain pressure to apply it to the tensile and compression tests. And the tensile and compressive behavior of magnesium at each temperature was investigated with the developed jig and DIC equipment. In each experiment, the strain rate condition was set to a quasi-static strain rate of 0.01/s. The transformation temperature is room temperature, 100℃. 150℃, 200℃, 250℃. As a result of the experiment, the flow stress tended to decrease as the temperature increased. The maximum stress decreased by 60% at 250 degrees compared to room temperature. Particularly, work softening occurred above 150 degrees, which is the recrystallization temperature of the magnesium alloy. The elongation also tended to increase as the deformation temperature increased and increased by 60% at 250 degrees compared to room temperature. In the compression experiment, it was confirmed that the maximum stress decreased as the temperature increased.