• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.69-76
• /
• 2007

The body of an excavator, one sort of the construction equipment, consists of mainframe part, track frame part, boom part and arm part. The all parts are manufactured in the body welding operation. The scheduling in the body welding operation of a construction equipment manufacturing is to take all the various constraints into consideration. The offset time, due date, daily capacity of operations, daily jig's capacity, precedence relation, outsourcing, alternative resource and all of the shop floor environment should be considered. An APS(Advanced Planning & Scheduling) system is a proper and efficient system in such circumstance. In this paper, we present an APS system, the optimal scheduling system for the construction equipment manufacturing specifically for the body welding operation, using ILOG Solver/Scheduler. ILOG Solver/Scheduler is a general purposed commercial software which supports to find a feasible or optimal solution using object oriented technique and constraints satisfaction programming, given constraints and objectives.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.04a
• /
• pp.96-99
• /
• 2001

Strength and manufacturing characteristics were evaluated in this paper. It depends on lay-up type and fiber direction when the fiber/resin composites have specific notch shapes. Unique jig and fixture were designed and used to test laminated specimens with notches. From the result of uni-direction specimen test we try to predict strength of multi-direction specimen by FEA.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.2
• /
• pp.35-41
• /
• 1996

This paper is aimed to solve local buckling problem that can frequently occur when the high speed ship's hull of sandwich structural type is crushed by rarbour and cargo. Experiment is performed on 36 specimens cut of 4-plates that made of sandwich type(Kevlar-Epoxy, Klegecell foam) and 16-Edgewise compressive test specimen, 16-Flatwise test specimen were tested by A.S.T.M. test method. The result of this study is analyzed and compared in test method and test jig to perorm Edgewise compressive test and Flatwise test.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.265-268
• /
• 2008

본 연구에서는 대기압 플라즈마의 처리 조건에 따른 Tri-acteyl-cellulose (TAC) 필름의 접착력 향상을 위한 접촉각 및 표면에너지의 변화를 관찰하였다. 대기압 플라즈마의 처리 변수로는 처리 속도, 방전 전력, 시료와 플라즈마 헤드 사이의 간격 및 $N_2$ 가스 유속이며, 각각의 처리 변수가 TAC 필름의 표면 특성 변화에 미치는 영향을 조사하였다. 실험결과 방전전력 및 $N_2$ 유량이 증가할수록 접촉각은 낮아지고 표면에너지는 증가하였다. 그리고 시료와 플라즈마 헤드 사이의 방전 간격은 2[mm]에서 접촉각이 낮고 표면에너지가 높게 나타나 TAC 필름의 접착력 향상을 위한 친수성 물질로 표면 개질됨을 확인할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.923-926
• /
• 2009

We fabricated large-area OLED lighting device using screen printing. In order to operate full area of large-area OLED uniformly, each cell in OLED panel was designed to work separately. We connected OLED panel with a PCB electrically using jig pins so that each cell could be operated individually. In this presentation, we report a few important issues on the fabrication of large-area OLED for lighting applications.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.6
• /
• pp.230-235
• /
• 2003

In this paper, a superposed discharge type ozonizer with an internal dielectric that can be made into a vacuum tube has been designed and fabricated. Ozone generation and discharge characteristics have been investigated in accordance with output voltage of power supply, flow-rate, discharge power and vacuum of inside internal dielectric. Pure oxygen was used as the supply gas of the ozonizer. Ozone concentration and ozone generation are gradually increased when discharge power is increased at the same flow-rate and they are both proportional to the vacuum level. As such, the maximum ozone concentration of 8840 ppm was obtained at vacuum 0.1 Torr and flow-rate 0.5 $\ell$/min.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.192-197
• /
• 2004

The anisotropy in coefficient of thermal expansion (CTE) between the in-plane and out-of-plane of 3-dimensional thick composite structures induces residual stresses and the large void content due to insufficient compaction of fabric composites, which results in low interlaminar strengths. In order to reduce the through thickness CTE and the void content, in this work, carbon fabric phenolic laminates were compacted by pressure generated by autoclave and a compressive jig, from which the through-thickness CTEs and the void contents were measured. From the measurement, it was found that the through-thickness CTE and the void content had different characteristics from ordinary composites due to gas produced during the cure reaction of phenolic resin.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.1
• /
• pp.83-89
• /
• 2009

In most multi-stage forging processes, the die spotting process or alignment of punch and die depends on the manual operation. It results a very tedious and inefficient procedure, thus the proper measurement system is needed to improve productivity and accuracy. This paper proposes a measurement system for alignment of die and punch which has a cylindrical holder, and describes the system concepts using 3 eddy-current displacement transducers and precise measurement jig. In order to apply this measurement system to real situations, the measuring procedures and system calibration method, etc. are proposed. Finally, the accuracy and productivity of this measurement system are investigated in this paper.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.104-109
• /
• 2008

Nowadays, the researches for improving LCD manufacturing process and reducing cost are getting accelerated and additionally new types of process are widely developed. In this situation, APEM(Anti Photo Exposure Method) which does not need photo-lithography is realized as one of possible alternative of LCD process. APEM makes LCD pattern by stamping and it can reduce the process cost and process time because of its simplicity. But optical alignment between pattern glass and target glass is very critical fact to realize the precise patterns. So, the analysis of deflection of large size of glass is carried out and design of experiment method is applied for optimal design of jig.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.3
• /
• pp.402-406
• /
• 2010

Conventionally, the machined surface roughness in nano-second(ns) laser machining is damaged and rough due to thermal effects. To obtain the improved surface finish, the ultrasonic vibration is applied to ns-laser machining. The ultrasonic vibration jig is developed to apply the ultrasonic high precision motion to workpieces. And then the ns-laser machining is conducted to compare the effects of the ultrasonic vibration. The results show that the surface roughness with ultrasonic vibration is smoother than that without the vibration. The phenomenon could be explained as enhancement of heat transfer by ultrasonic vibration.