• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.286-293
• /
• 2003

The prototype of Korean high speed train (HSR350), composed of two power cars, two motorized cars and three trailer cars, has been designed, fabricated and tested. In this paper, the body vibration has been reviewed from the viewpoint of the vehicle's safety and the vibration limits for components and sub-assemblies mounted on the car-body using by the experimental method. And, the dynamic characteristics, such as jerk, natural mode and kinematic mode, have been reviewed. The KHST has been run to 300 km/h in the KTX line and the results of on-line test show that it has no problems in the vehicle's safety and the vibration limits. And the characteristics of body vibrations has been predicted at 350 km/h by fitting curve about the measured acceleration signals.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.251-258
• /
• 1999

This paper is mainly concerned with the development of the ATO(Automatic Train Operation) profile on precision stop controller. The ATO system is used for automatic or driverless operation of a train. In this paper, the algorithm for ATO controller is presented and three speed profiles on precision stop controller are compared. One profile is based on the maximum jerk control, another on the constant control input, and the third on the optimal control for the minimum energy consumption. These profiles are simulated and analyzed in view of the stop time, control input, jerk, propulsion and braking.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.29-37
• /
• 2007

In the automatic operation of an urban rail vehicle, a conventional PID control algorithm is applied to run the vehicle between stations within time limit and jerk limit. But the energy consumption in the automatic operation is much higher than in the manual operation. In this study, the optimal control algorithm for automatic operation is proposed to minimize energy consumption, which satisfies automatic operation for the urban rail vehicle, compared with the conventional PID control algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2015

Objective : The purpose of this study was to find some kinetic variable's relationships between personal records and low records in female high jump. Methods : Collected data of the subjects(N=8, ages: $25.5{\pm}1.85$, height: $173{\pm}5.83$, mass: $54.75{\pm}6.36$ personal record: $1.71{\pm}0.04$, low record: $1.62{\pm}0.03$) were used for the last three strides and take-off phase. Five video cameras set in 30frames/s were used for recording. After digitizing motion, the Direct Linear Transformation(DLT) technique was employed to obtain 3-D position coordinates. The kinematic and kinetic factors of distance, velocity, angle, impulse, jerk variables were calculated. A paired t-test was applied for the difference of variables between personal records and lower records and for correlation with performances and variables. The significance level was accepted at p<.05. Results : There was no relationship between pattern of stride and performance. However, rate of change of velocity was related with cental of mass height(CMH) at peak point(PP). Knee, hip, backward lean, foot plant, approach and take off angle showed no difference between best record and low record. Vertical impulse momentum also showed no difference between performances. Conclusion : According to a t-test result, there were significant differences in CMH at PP and jerk at touch down between best record and low record.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.206-217
• /
• 2015

This paper presents a complete S-shape feed rate scheduling approach (CSFA) with confined jerk, acceleration and command feed rate for parametric tool path. For a Non-Uniform Rational B-Spline (NURBS) tool path, the critical points of the tool path where the radius of curvature reaches extreme values are found firstly. Then, the NURBS curve is split into several NURBS sub-curves or blocks by the critical points. A bidirectional scanning strategy with the limitations of chord error, normal/tangential acceleration/jerk and command feed rate is employed to make the feed rate at the junctions between different NURBS blocks continuous. To improve the efficiency of the feed rate scheduling, the NURBS block is classified into three types: short block, medium block and long block. The feed rate profile corresponding to each NURBS block is generated according to the start/end feed rates and the arc length of the block and the limitations of tangential acceleration/jerk. In addition, two compensation strategies are proposed to make the feed rate more continuous and the arc increment more precise. Once the feed rate profile is determined, a second-order Taylor's expansion interpolation method is applied to generate the position commands. Finally, experiments with two free-form NURBS curves are conducted to verify the applicability and accuracy of the proposed method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.240-246
• /
• 1995

The responses of red tile fish, Branchiostegus Japonicus to a longline gear were examined in an experimental tank using two video cameras, in order to know hooking mechanism and improve longline hook. In attraction stage, the fish swim to upstream direction slowly just above the bottom toward the baited hook. The majority of the fish then biting the bait incompletely, after the biting, the fish made a backward swimming with low intense, and the bait was usually spitting out when snood was stretched. In most case, hooking took place at the moment the fish made jerk or rush after the bait wallowed. The behaviour sequence closely related to hooking are chewing and jerking or chewing and rushing. According to the field experiments, the tested hooks of long shank show very low catching efficiency compared to the traditional hook with short shank, and the hooked position of the traditional hooks were oesophagus or stomach but the tested hooks were mouth in the most cases. For catching efficiency, desirable hook shape were inferenced inner-curved point and short shank because its ease to swallow. The shape and demensions of a porposed hook were determined in consideration of mechanized gear handling and hooking performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.278-278
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1479-1480
• /
• 2011

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.212-217
• /
• 1993

In this paper, characteristics of the motions of a human arm are investigated experimentally. When the conditions of the target point are restricted, human adjusts its trajectory and velocity pattern of the arm to fit the conditions skillfully. The purpose of this work is to examine the characteristics of the trajectory, velocity pattern, and the size of the duration in the following cases. First, we examine the case of point-to-point motion. The results are consistent with the minimum jerk theory. However, individual differences in the length of the duration can be observed in the experiment. Second, we examine the case which requires accuracy of positioning at the target point. It is found that the velocity pattern differs from the bell shaped pattern explained by the minimum jerk theory, and has its peak in the first half of the duration. When higher accuracy of the positioning is required, learning effects can be observed. Finally, to examine the case which requires constraint of the arm posture at the target point, we conduct experiments of a human trying to grasp a cup. It is considered that this motion consists of two steps : one is the positioning motion of the person in order to start the grasping motion, the other is the grasping motion of the human's hand approaching toward the cup and grasping it. In addition, two representative velocity patterns are observed : one is the similar velocity pattern explained in the above experiment, the other is the velocity pattern which has its relative maximum in the latter half of the duration.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.596-602
• /
• 2010

In this study, a fmite element model was developed for analysis of feeding a structure in open loop control The finite element analysis (FEA) can simulate dynamic behavior of the structure of a machine tool rapidly traveling with a screw feeding driving system. The feeding mechanism was implemented with screw element of the FEA tool used in this study. The procedure was developed for the dynamic transient FEA. First, motion parameters such as jerk and velocity were introduced for the structure to be fed in open loop control When its traveling distance was determined, set-points for the distance were generated based on the motion parameters. The set-points were applied to the FE model constructed for the traveling structure. The FEA was executed and evaluated. In this study, the FEA procedure was applied to the column of a machine tool and the dynamic behavior of the column was evaluated. The FEA helps in evaluation of the motion characteristics of a structure. The convergence time of the structure vibration posterior to feeding termination can be estimated and the stiffness of the flexible structure is also evaluated against jerk, and acceleration. It provides the feeding force which is helpful in selection of the feeding motor.