• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.102-115
• /
• 2004

Main objectives of this study were to increase digestibilities of indigestible ingredients in spent mushroom composts (SMC) consisted of sawdust mainly as well as to fortify conversion of inorganic Se present in SMC to organic Se via fermentable microbial actions. Experimental feeds were designed to contain the increasing level of selenium (0.06ppm, 0.54ppm, 1.26ppm and 1.86ppm) in combination with SMCs of Se-enriched and non-Se mushrooms. Feeds were also fermented using commercial microbial feed additives (Sambae, Ltd., Korea) comprised Saccharomyces, Bacillus, Aspergillus, Streptococcus and Actinomycetes before feeding trial for Hanwoo (Korean native cattle). Those were fermented for 0, 12, 24, and 48 hrs. Initial pH was linearly increased as Se concentration increases or the proportion of SMC of Se-enriched mushroom increased (p<0.0001). pH values of fermented feeds (0.54ppm, 1.26ppm and 1.86ppm) containing SMC of Se-enriched mushroom were not different since 12 hrs of fermentation time and their pH was significantly lowered compared to control group. The increasing level of Se concentration in fermented feeds showed significant differences in organic and inorganic Se contents and proportion of organic Se among treatments. As a SMC proportion of Se-enriched mushrooms in the fermented feed was increased, organic Se proportion was significantly decreased (p<0.0001). The control treatment (0.06ppm) comprising the non-Se SMC only was estimated of the organic Se to be 100% and the treatment groups containing the increasing level of Se were estimated of organic Se to be approximately 70%.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.553-565
• /
• 2022

Awareness of the ecological value and importance of protected areas has increased as climate change accelerates, and there is a need for research on ecosystem services provided by nature. The natural park, which is a representative protected area in Korea, has a system of national parks, provincial parks, and county parks. National parks are managed systematically by the Korea National Park Service, but local governments manage provincial parks and county parks. There may be the same hierarchical differences in naturalness (habitat quality) depending on the hierarchy of the natural parks, but it has not been verified. To identify differences, we examined 22 mountain-type natural parks using habitat quality using the INVEST model developed by Stanford University. The analysis of the habitat quality, regardless of the type and area of the natural park, showed that it was higher in the order of Taebaeksan National Park (0.89), Juwangsan National Park (0.87), Woongseokbong County Park (0.86), and Gayasan National Park (0.85). The larger the area, the higher the value of habitat quality. A comparison of natural parks with similar areas showed that the habitat quality of national parks was higher than that of provincial parks and parks. On the other hand, the average habitat quality of county parks was 0.83±0.02, which was 0.05 higher than that of provincial parks at 0.78±0.03. Furthermore, the higher the proportion of forest areas within the natural park, the higher the habitat quality. The results confirmed that the naturalness of natural parks was independent of their hierarchy and that there are differences in naturalness depending on land use, land coverage, and park management.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.114-129
• /
• 2023

In the era of the 4th industrial revolution, the importance of the 4th industrial revolution technology is increasing in the service industry. The purpose of this study is to identify the development and utilization status of the 4th industrial revolution technology in the service industry and to derive the characteristics and implications of the 4th industrial revolution technology innovation in the service industry. In this study, research and analysis were conducted based on the business activity survey data in order to identify the technological innovation characteristics of the 4th industrial revolution in the service industry. The 4th industrial revolution technology in the service industry was analyzed in terms of company ratio, technology development and utilization rate, development/utilization technology, technology application field, and technology development method. In addition, the trend of the 4th industrial revolution technology change in the service industry was also analyzed. The 4th industrial revolution technology utilization and development status of other industries was compared and analyzed. In particular, the service industry 4th industrial revolution technology innovation type was divided into 4 types from the perspective of the 4th industrial revolution company ratio and the 4th industrial revolution company ratio growth rate, and types for each service industry were derived. The characteristics and implications of the 4th industrial revolution technology innovation in the service industry were presented from nine perspectives. As a result of the study, it was found that companies in the service industry were developing or using 4th industrial revolution technologies more actively than companies in other industries, and it was analyzed that the gap was further widening. By service industry, information and communication, finance and insurance, and educational service showed relatively high rates of developing or utilizing 4th industrial revolution technologies. The service industries in which the share of 4th industrial revolution companies increased the most were real estate, education service, health and social welfare service. In particular, cloud, big data, and artificial intelligence were analyzed as the three core technologies of the fourth industrial revolution. The service industry can be classified into 4 types in terms of the 4th industrial revolution company ratio and growth rate, and service industry innovation measures that reflect the differentiated innovation characteristics of each type are needed.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.89-96
• /
• 2023

This study was conducted to apply with an air duct for the cooling and a utilizing cultivating method that uses the fruiting node and the defoliation to the high-temperature vertical and hydroponic cultivation of the oriental melon. The lower fruiting node (LF) was to remove all third vines generated from 5 nodes of a secondary vine. The higher fruiting node (HF) was fruiting on the third vine generated from a first node of the third vine. The direction of the stem string; upward (UW), downward (DW). Four treatment conditions were applied with the LF-UW, LF-DW, HF-UW (control), and HF-DW. The leaf age of melon leaves was measured for photosynthesis at 3 days intervals, and the fruit characteristic was conducted on 79 fruits in each treatment. The photosynthesis rate steadily increased after leaf development, reaching 20.8 μmol CO₂·m^-2·s^-1 on the 10 days, gradually increasing to 21.3 μmol CO₂·m^-2·s^-1 on the 19 days, and reaching 23.4 μmol CO₂·m^-2·s^-1 on the 32 days. After that, it lowered to 16.8 μmol CO₂·m^-2·s^-1 on the 38 days and dropped significantly to 7.6 μmol CO₂·m^-2·s^-1 on the 47 days. As a result of the fruit characteristics by fruiting nodes, the treatments of the fruit length was 12.6-13.4 cm, respectively, which was significant, and the fruit width was 7.9- 8.6 cm, respectively, was not significant. The soluble content ranged from 12.9 to 15.7°Brix, and the significance of all treatments, and higher than of LF-DW and HF-UW. The photosynthesis rate of melon leaves was good until 32 days after leaf development, but after that, the rate decreased. As for fruit quality, it was conformed that melons can be cultivated at the LF because the fruit enlargement and soluble content dose not decrease even when set at the LF. Results indicated that those can be used for LF and defoliation in the development of vertical and hydroponic cultivation method in high-temperature season.

• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.46-54
• /
• 2023

In this study, we examined the residual amounts of formaldehyde in hygiene products to determine the safety of these products in Gyeonggi-do. Formaldehyde is among the harmful substances that may remain within certain hygiene products. On the basis of an analysis of formaldehyde in a total of 222 items (6 disposable paper straws, 9 disposable paper napkins, 21 toilet papers, 13 disposable dishcloths, 16 disposable paper towels, 32 wet wipes for food service restaurants, 25 disposable cotton swabs, and 100 disposable diapers), we detected traces in three wet wipes for food service restaurants (1.87 to 4.45 mg/kg), which is approximately 9% to 22% of the standard level (20 mg/kg). We established that all the hygiene products assessed in the study met the individual standards for formaldehyde, thereby confirming that safe products are being distributed. In the standards and specifications for hygiene products, the formaldehyde test method is regulated for application with respect to three categories based on the type of product. The samples used in this study were of types for which method 1 or method 2 is applied, and the limits of detection, limits of quantification, linearity, and recovery rates were reviewed to verify the validity of each test method. When method 2 was applied, we experienced interference when performing analysis at a wavelength of 412 nm, which was associated with the influence of impurities in some samples of disposable cotton swabs and disposable diapers. Consequently, in these cases, the results were compared after analysis using method 1. By comparing the results obtained using method 2 with those obtained using method 1, the latter of which were unaffected by the interference of impurities, we were able to detect formaldehyde at low concentrations. These findings accordingly highlight the necessity to standardize the formaldehyde test method for future analyses.

• The Korean Journal of Mycology
• /
• v.50 no.4
• /
• pp.281-289
• /
• 2022

Fusarium head blight is an important disease of small grains. It is mainly caused by members of the Fusarium graminearum species complex (FGSC). Barley and wheat growers spray fungicides, especially demethylation-inhibitor fungicides, to suppress the disease. The objective of this study was to examine the changes in the sensitivity of the FGSC population to the triazole fungicide, propiconazole. A total of 124 and 350 isolates of FGSC were obtained from barley and wheat in Jeolla Province during 2010-2016 and 2020-2021, respectively. The species identity and trichothecene chemotypes of the FGSC isolates were determined based on polymerase chain reaction assays targeting translation elongation factor 1-alpha and TRI12 genes, respectively. Sensitivity to propiconazole was determined based on the effective concentration that reduced 50% of the mycelial growth (EC₅₀) using the agar dilution method. Of all isolates, F. asiaticum with the nivalenol chemotype was the most common (83.9% in 2010-2016 and 96.0% in 2020-2021), followed by F. asiaticum with the 3-acetyl deoxynivalenol chemotype (12.1% in 2010-2016 and 2.9% in 2020-2021). The EC₅₀ values of the isolates collected in 2010-2016 and 2020-2021 ranged from 0.0180 to 11.0166 ㎍/mL and 1.3104 to 17.9587 ㎍/mL, respectively. The mean EC₅₀ value of the isolates increased from 3.8648 ㎍/mL in 2010-2016 to 5.9635 ㎍/mL in 2020-2021. The baseline resistance to propiconazole was determined to be 7 ㎍/mL, based on the EC₅₀ value of isolates collected in 2010-2016, and the ratio of resistant isolates increased from 9.7% in 2010-2016 to 28.6% in 2020-2021.

• Korean Journal of Environmental Biology
• /
• v.41 no.1
• /
• pp.18-30
• /
• 2023

Forest destruction is an inevitable result of the development processes. According to the environmental impact assessment, over 10% of the destroyed trees need to be recycled and transplanted to minimize the impact of forest destruction. However, the rate of successful transplantation is low, leading to a high rate of tree death. This is attributable to a lack of consideration for environmental factors when choosing a temporary site for transplantation and inadequate management. To monitor transplanted trees, a field survey is essential; however, the spatio-temporal aspect is limited. This study evaluated the applicability of remote sensing for the effective monitoring of transplanted trees. Vegetation indices based on satellite remote sensing were derived to detect time-series changes in the status of the transplanted trees at three temporary transplantation sites. The mortality rate and vitality of transplanted trees before and after the transplant have a similar tendency to the changes in the vegetation indicators. The findings of this study showed that vegetation indices increased after transplantation of trees and decreased as the death rate increased and vitality decreased over time. This study presents a method for assessing newly transplanted trees using satellite images. The approach of utilizing satellite photos and the vegetation index is expected to detect changes in trees that have been transplanted across the country and help to manage tree transplantation for the environmental impact assessment.

• Conservation Science in Museum
• /
• v.29
• /
• pp.133-152
• /
• 2023

This study references preceding studies to examine the history of paint application techniques using various paints in the past, with the aim to contribute to the long-term preservation of large military cultural heritage assets situated outdoors. To this end, the study compared the findings of preceding research with the findings of an analysis conducted on a H-13 helicopter housed at the War Memorial of Korea. Upon collecting and analyzing samples from three grounded WWII aircraft from above-ground by preceding studies, it was confirmed from each sample that the various chemical properties of chrome ensured the effectiveness of the protective coating. The compound was first tested as a corrosion-inhibiting pigment in the early 1940s and proved its excellent moisture-resistant properties over the course of 80 years, despite the deterioration of the paint layer and long-term exposure to the natural environment. For this reason, it has been widely used as a corrosion inhibitor for aluminum alloys in the aviation industry. In other word, the most widely-used material for preventing corrosion was an organic primer containing chromate. In this study, based on the paint analysis of a H-13 helicopter operated in the Korean War, it was shown that the second layer, consisting of the primer, contains chromium oxide (Cr₂O₃). In addition, it was estimated that red lead tetraoxide (Pb₃O₄) was used for the vehicle. Analysis results and data from previous studies can help to confirm the continued effectiveness of corrosion prevention function provided by chromate. Meanwhile, the result of infrared spectroscopy analysis confirmed the use of alkyd resin. In the future, comparisons with a more diverse range of artifacts will allow the identification of changes in the manufacturing technology of paints used to protect alloys from corrosion.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.157-167
• /
• 2009

Recently, the leakage of confidential information and personal information is taking place on the Internet more frequently than ever before. Most of such online security incidents are caused by attacks on vulnerabilities in web applications developed carelessly. It is impossible to detect an attack on a web application with existing firewalls and intrusion detection systems. Besides, the signature-based detection has a limited capability in detecting new threats. Therefore, many researches concerning the method to detect attacks on web applications are employing anomaly-based detection methods that use the web traffic analysis. Much research about anomaly-based detection through the normal web traffic analysis focus on three problems - the method to accurately analyze given web traffic, system performance needed for inspecting application payload of the packet required to detect attack on application layer and the maintenance and costs of lots of network security devices newly installed. The UTM(Unified Threat Management) system, a suggested solution for the problem, had a goal of resolving all of security problems at a time, but is not being widely used due to its low efficiency and high costs. Besides, the web filter that performs one of the functions of the UTM system, can not adequately detect a variety of recent sophisticated attacks on web applications. In order to resolve such problems, studies are being carried out on the web application firewall to introduce a new network security system. As such studies focus on speeding up packet processing by depending on high-priced hardware, the costs to deploy a web application firewall are rising. In addition, the current anomaly-based detection technologies that do not take into account the characteristics of the web application is causing lots of false positives and false negatives. In order to reduce false positives and false negatives, this study suggested a realtime anomaly detection method based on the analysis of the length of parameter value contained in the web client's request. In addition, it designed and suggested a WAF(Web Application Firewall) that can be applied to a low-priced system or legacy system to process application data without the help of an exclusive hardware. Furthermore, it suggested a method to resolve sluggish performance attributed to copying packets into application area for application data processing, Consequently, this study provide to deploy an effective web application firewall at a low cost at the moment when the deployment of an additional security system was considered burdened due to lots of network security systems currently used.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.43-51
• /
• 2022

Regulation of the hair follicle cycle in association with dermal papilla cells is one of the most interesting targets for promoting hair regrowth. In this study, we examined whether steam-dried Betula platyphylla extracts (BPE) promote hair growth by upregulating in vitro and in vivo responses of dermal papilla cells. The data showed that BPE3 contained high amounts of phenolic compounds with higher antioxidant effects and increased hair growth-related genes, including fibroblast growth factor7 and Wnt7b, in dermal papilla cells. Notably, BPE3 effectively enhanced the formation of hair follicles by increasing FGF7, Wnt7b, and vascular endothelial growth factor in C57BL/6N dorsal skins. Additionally, BPE3 significantly decreased the expression of inflammatory repertoires, inducible nitric oxide synthase, interleukin-6, and cyclooxygenase 2. Several small molecules, such as betulin and unsaturated fatty acids, support the pharmacological activity of BPE3. In conclusion, BPE3 effectively promoted hair growth by activating dermal papilla cells and enhancing hair follicle cycles by attenuating the inflammatory environment in the scalp.