• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.12-17
• /
• 2009

We consider an OFDM based multiple AF relaying systems. Since the channel between first hop (source station-relay station) and second hop (relay station -destination station) varies independently, the subcarrier in the first hop can be paired to another subcarrier in the second hop for the increase of the system capacity. The conventional pairing which uses the brute force searching requires large complexity while giving optimal pairing for maximum system capacity. In this paper, we present sub-optimal subcarrier pairing scheme with low complexity. Every RS firstly pairs the subcarrier with the highest channel gain in the first hop to the subcarrier with highest channel gain in the second hop. The pair with the highest SNR among all the pairs is determined as final selected pair and the corresponding subcarriers are not selected at other RSs in the next paring iteration. This process is repeated until all the subcarriers are paired. Simulation results show the proposed pairing scheme achieves near optimal performance with low complexity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.361-371
• /
• 2012

In order to improve the efficiency of the branch-and-bound method for mixed-discrete nonlinear programming, a nonuniform convergence tolerance scheme is proposed for the continuous subproblem optimizations. The suggested scheme assigns the convergence tolerances for each continuous subproblem optimization according to the maximum constraint violation obtained from the first iteration of each subproblem optimization in order to reduce the total number of function evaluations needed to reach the discrete optimal solution. The proposed tolerance scheme is integrated with five branching order options. The comparative performance test results using the ten combinations of the five branching orders and two convergence tolerance schemes show that the suggested non-uniform convergence tolerance scheme is obviously superior to the uniform one. The results also show that the branching order option using the minimum clearance difference method performed best among the five branching order options. Therefore, we recommend using the "minimum clearance difference method" for branching and the "non-uniform convergence tolerance scheme" for solving discrete optimization problems.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.272-281
• /
• 2014

In electrical impedance tomography (EIT), modified Newton Raphson (mNR) method is widely used inverse algorithm for static image reconstruction due to its convergence speed and estimation accuracy. The unknown conductivity distribution is estimated iteratively by minimizing a cost functional such that the residual error namely the difference in measured and calculated voltages is reduced. Although, mNR method has good estimation performance, EIT inverse problem still suffers from ill-conditioned and ill-posedness nature. To mitigate the ill-posedness, generally, regularization methods are adopted. The inverse solution is highly dependent on the choice of regularization parameter. In most cases, the regularization parameter has a constant value and is chosen based on experience or trail and error approach. In situations, when the internal distribution changes or with high measurement noise, the solution does not get converged with the use of constant regularization parameter. Therefore, in this paper, in order to improve the image reconstruction performance, we propose a new scheme to determine the regularization parameter. The regularization parameter is computed based on residual error and updated every iteration. The proposed scheme is tested with numerical simulations and laboratory phantom experiments. The results show an improved reconstruction performance when using the proposed regularization scheme as compared to constant regularization scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1198-1205
• /
• 2000

In this paper, we introduce a modified interference cancellation scheme to overcome MAI in DS-CDMA. Among ICs(Interference Cancellers), PIC(Parallel IC) requires the more complexity, and SIC(Successive IC) faces the problems of the long delay time. Most of all, the adaptive detector achieves the good BER performance using the adaptive Inter conducted iteration algorithm. So it requires many iterations. To resolve the problems of them, we propose an improved adaptive detector that the received signal removed MAI through the sorting scheme and the cancellation method are fed into the adaptive filter. Because the improved input signal is fed into the adaptive filter, it has the same BER performance only using smaller iterations than the conventional adaptive detector, and the proposed detector having adaptive filter requires less complexity than the other detectors.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.4
• /
• pp.312-326
• /
• 2012

This paper considers a fully coupled 3D BEM-FEM analysis for the ship structural hydroelasticity problem in waves. Fluid flows and structural responses are analyzed by using a 3D Rankine panel method and a 3D finite element method, respectively. The two methods are fully coupled in the time domain using a fixed-point iteration scheme, and a relaxation scheme is applied for improve convergence. In order to validate the developed method, numerical tests are carried out for a barge model. The computed natural frequency, motion responses, and time histories of stress are compared with the results of the beam-based hydroelasticity program, WISH-FLEX, which was thoroughly validated in previous studies. This study extends to a real-ship application, particularly the springing analysis for a 6500 TEU containership. Based on this study, it is found that the present method provides reliable solutions to the ship hydroelasticity problems.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.201-207
• /
• 2009

Recently effective spectrum resource technologies have been studied using a game theorectical approach for cognitive radio networks. Radio resource management is required an effective scheme because the performance of a radio communication system much depends on it's effectiveness. In this paper, we suggest a game theoretical algorithm for adaptive power control which is required an effect scheme in cognitive radio networks. It will be a distributed network. In the network distributed cognitive radio secondary users require an adaptive power control. There are many results which are suggested some possibility of game theoretical approaches for communication resource sharing. However, we suggest a practical game algorithm to achieve Nash equilibrium of all secondary users using a Nash equilibrium theorem in this paper. Particularly, a game model was analyzed for adaptive power control of a cognitive radio network, which is involved in DSSS (Direct Sequence Spread Spectrum) techniques. In case of K=63 and N=12 in the DSSS network, the number of iteration was less than maximum 200 using the suggested algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1291-1297
• /
• 2004

In this paper, the new scheduling algorithm that supports the maximization of system throughput and the proportional fairness among non-real time traffic users is proposed in OFDMA wireless mobile communication systems. The concept of the proposed algorithm is based on the proportional fairness algorithm, which is deployed in 3GPP2, and sorting method. The proportional fairness algorithm is adapted to allocate the number of subcarrier per user. A sorting method is contributed to the maximization of system throughput in the practical allocation of subcarrier per user. Simulation results show that new algorithm had better performance than the max rate rule in case of fairness, higher throughput than the scheduling algorithm without sorting method. Even though the system throughput of the proposed algorithm is almost same with the iteration scheme using subcarrier swapping method between users, the computational time of the former is reduced up to 3 times than the latter.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.6
• /
• pp.528-533
• /
• 2012

Flexible composite propellers are subject to large deformation under heavy loading, and hence the hydrodynamic performance of deformed propeller might deviate from that of the metallic propeller under negligible deformation. To design the flexible propeller, it is therefore necessary to be able to evaluate the structural response of the blades to the hydrodynamic loadings, and then the influence of the blade deformation upon the hydrodynamic loadings. We use the lifting-surface-theory-based propeller analysis and design codes in solving the hydrodynamic problem, and the finite-element-method program formulated with 20-node iso-parametric solid elements for the analysis of the structural response. The two different hydrodynamic and structural programs are arranged to communicate through the carefully-designed interface scheme which leads to the derivation of the geometric parameters such as the pitch, the rake and the skew distributions common to both programs. The design of flexible propellers, suitable for manufacturing, is shown to perform the required thrust performance when deformed in operation. Sample design shows the fast iteration scheme and the robustness of the design procedure of the flexible propellers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1493-1498
• /
• 2000

In this paper, we introduce a modified interference cancellation scheme to overcome MAI in DS-CDMA. Among ICs(Interference Cancellers), PIC(Parallel IC) requires the more complexity, and SIC(Successive IC) faces the problems of the long delay time. Most of all, the adaptive detector achieves the good BER performance using the adaptive filter conducted iteration algorithm. so it requires many iterations. To resolve the problems of them, we propose an improved adaptive detector that the received signal removed MAI through the sorting scheme and the cancellation method are fed into the adaptive filter. Because the improved input signal is fed into the adaptive filter, it has the same BER performance only using smaller iterations than the conventional adaptive detector, and the proposed detector having adaptive filter requires less complexity than the other detectors.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.423-426
• /
• 2005

In this paper, we propose a receiver that combines a channel detector with a channel decoder to retrieve information from ISI and AWGN in an iteratively manner. The receiver, evolving from a system of a PRML detector and a RS decoder, consists of a SOVA detector followed by a LDPC decoder and has them exchange information iteratively. Rather than handling extrinsic reliabilities explicitly as in Turbo equalization, we take hard-decision values from the LDPC decoder and mix them with the channel output in a certain ratio as input for SOVA. The scheme, simply modified to the one-way structure of a SOVA and a LDPC decoder, shows improved performance with iteration numbers as well as the combining ratio of the channel output and the feedback output. We additionally analyze the receiver with a simple theoretical model and present some valuable properties.