• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.417-424
• /
• 2015

In this study, the relationship between selenoprotein concentrations in blood and stomach cancer have been searched for Korean. The concentration of each selenoprotein in blood serum was analyzed and the correlation between the concentration and stomach cancer was studied to find a potential for using Selenium as a biomarker. In concentration determination, a simple calibration curve method was used with the monitoring of m/z 78 without the use of solid phase extraction. This is a lot more simple than the method using SPE with post column isotope dilution. The result obtained from the analysis of CRM BCR-637, 72.20±3.35 ng·g⁻¹, showed similar value of reference value (81±7 ng·g⁻¹). The total concentration of Se for the controlled group, cardiovascular patients group, was 105.70±21.20 ng·g⁻¹. This value was the same as normal healthy person reported earlier. Each selenoprotein concentration of GPx, SelP and SeAlb was 26.12±7.84, 65.15±14.50, 14.43±6.99 ng·g⁻¹, respectively. The distribution of each selenoprotein was 24.7%, 61.6%, and 13.7%, which was similar to the normal person. The result of stomach cancer patients, the total concentration of Se was 76.11±28.12 ng·g⁻¹ and each concentration of GPx, SelP and SeAlb was 15.41±9.01, 50.83±17.91, and 9.87±5.21 ng·g⁻¹, respectively. The total and each selenoprotein concentration level showed significant decrease for the stomach cancer patients. The level of decrease was 41.0% for GPx, 22.0% for SelP, and 31.6% for SeAlb. However, the distribution of each selenoprotein was not much different. Either total Selenium or each selenoprotein could be used as a possible index for the diagnosis of cancer. However, in age group study, it is shown that young age group (30's-40's) did not show much difference.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.436-445
• /
• 2015

Amomi Fructus with anti-oxidative activity was chosen and essential oil was obtained by SDE (simultaneous distillation extraction), and 39 constituents were determined by GC-MS (gas chromatography-mass spectrometry). Major components were camphor, borneol acetate, borneol, D-limonene and camphene. Three solvent extracts such as hexanes, diethyl ether and methylene chloride from Amomi Fructus were obtained. These were analyzed by GC-MS and 4 more constituents were identified in addition to 39 components discovered in essential oil. Five major components such as camphor, borneol acetate, borneol, D-limonene and camphene were also detected, however the relative peak percents of those components were different from those of constituents in essential oil. To estimate the kind and the amount of materials evaporated at certain temperature and conditions from essential oil and solvent extracts, dynamic headspace apparatus was used and materials evaporated and trapped at certain conditions were analyzed by GC-MS. Recovery yield of SDE method from Amomi Fructus was measured by using camphor and standard calibration solution of camphor methanol solution and, the yield was 82.0%. Content of Hg was measured by mercury analyzer and contents of Cd, Pb, Cr, Mn, Co, Ni, Cu and Zn in Amomi Fructus, essential oils and solvent extracts were determined by ICP-MS (Inductively coupled plasma-mass spectrometer). Pb, Cd and Hg were measured in the concentration of 0.72 mg/kg, <0.10 mg/kg and 0.0023 mg/kg, respectively and these were below permission level of purity test. Contents of Mn, Cu and Zn in Amomi Fructus were 213 mg/kg, 8.29 mg/kg and 31.0 mg/kg, respectively and which were relatively higher than other metals such as Cr, Co and Ni. Metals such as Mn (0.65 ~ 9.08 mg/kg), Cu (1.16 ~ 4.40 mg/kg) and Zn (1.10 ~ 3.80 mg/kg) in essential oil and solvent extracts were detected. At this point it is not clear that the metals were cross-contaminated in the course of treating Amomi Fructus or metals were contained in Amomi Fructus. The influence evaluation toward biological model study of these metals in essential oil and solvent extracts will be needed.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• Journal of Korean Academy of Nursing
• /
• v.19 no.2
• /
• pp.212-222
• /
• 1989

When the head nurse who is pivotal in the nursing service administration of the hospital performs efficiently as a first-line manager, the effectiveness of the nursing unit, which includes the quality of nursing care, the jab satisfaction of staff members, and the cohesiveness of staff members is increased. With this point of view in mind, the researcher carried out a study to determine the actual work (the content of the work, the work process, the role of the head nurse, the activity media, and the purpose of the work) of the head nurse in a university hospital in Korea. In addition, this study was also carried out for the purpose of preparing an ideal model for the work of the head nurse. The research subjects were 39 head nurses. This included all the head nurses in two university hospitals except those who were working in outpatient care, operating rooms, central supply, nursing administration, in-service education and emergency care. Data were collected from September 24th to October 21th, 1987 and April 4th to 12th, 1988. A work activity record on which the head nurse recorded directly in a chronological narrative form, was used as the research instrument. The 234 work activity records, 39 head nurse's continuous recording over 6 days(from Monday to Saturday) were collected and analysed. The results were as follows ; 1. With regard to the work content for the total daily work of the head nurse, 45.2% of the activities were managerial activities but 58.1% of the head nurse' s time was spent in direct patient care. 2. With regard to the work process of the head nurse, specifically the location, the size and membership of groups contacted, the results were as follows : 1) Of the total daily work activities 92.4% were carried out in the nursing unit and this occupied 84.5% of total daily work time. Direct patient care was generally performed on the nursing unit and managerial work was performed in other areas. 2) Of the total daily work activities, 73% was with one or more persons and 51.2% of total daily work time was spent in groups. 3) A total of 51 persons, working in different capacities were contacted. These included 21 persons giving patient care, 19 persons working in nursing unit management, and 7 persons working in human resource management. 3. With regard to the head nurse's role in work activity, 53.3% of total daily work activities involved the informational role, 26.9%, the interpersonal role and 19.9%, the decisional role. With regard to time, 57.7% was spent in the informational role, 23.9%, in the interpersonal role and 18.3%, in the decisional role. When the head nurse performed managerial work, she gave nearly equal emphasis to all three roles when she gave direct patient care the informational role was increased. 4. With regard to the activity media, the number of unscheduled activities accounted for 27.1% of the activities, scheduled activities, 24.3%, desk work activity, 22.1%, rounds, 12.5% and telephone calls, made or received, 14.0%. In daily total work time managerial work related to desk work and scheduled activities were high, ranging from 29.8% to 29.9% but for direct patient care time, scheduled activities and unscheduled activities were high, ranging from 23.6％ to 35.3%. 5. With regard to the purpose of the work performed, 54.4% of the total daily work was concerned with the team and 41.4% was concerned with the agency. The managerial work was concerned mainly with the team and the direct patient care was concerned mainly with the patient. When the frequency of an activity and time were compared no significant difference was found between the days for which the work was recorded for any of the variables : the work content, the work process, the work role, the activity media and purpose of the work. On the basis of this study the following are proposed as an ideal model for head nurse work in Korea : The managerial work should be increased to 70%. The decisional role activities should be increased to 40%. Twenty percent of the work activity should be allocated to agency, community and profession. It is believed that this model for the head nurse's work can contribute to guidelines for job description development. Finally, educational programs, organizational and structural devices, and administrative support are needed for the proper function of the head nurse in this proposed model.

• Journal of Korean Academy of Nursing
• /
• v.1 no.1
• /
• pp.64-76
• /
• 1970

This report will present a clinical and statistical analysis of 210 case of Ectopic pregnancies who were treated at the Department of Obstetrics and Gynecology at Chung Nam Medical Center from January, 1966 to March, 1970. The results obtained are as follows; 1. The total number of Ectopic pregnancies was 8.22%. 2. The occurrence of Ectopic pregnancy was high in June(13.81%), low in October(2.98%). There was a higher occurrence of Ectopic pregnancy in the summer than in the winter. 3. The average age of all patients was 33.25 years. The most frequent age for this type of pregnancy was 31-35 years (32.86%) . The youngest patient was 18 years old and the oldest was 50. 4. Multipara occurred in 82.38% of the cases; Mulipara in 17. 62% and the occurrence of primipara was especially high, 20.95%. 5. 48.09% of the women had previously experienced normal deliveries; 42.8% had received artificial abortions and 5.23% had experienced spontaneous abortions. 3.8% had a previous history of Ectopic pregnancy. It was found that the occurrence of Ectopic pregnancy was more frequent in those women who had a D & C in the Past. 6. The average length of infertility was 21.7 months. The shortest length was 60 days; longest period of infertility was 19 years. 7. The occurrence of Ectopic pregnancy is higher (29.27%) in patient who have experienced only one previous D & C. The total number of patients who received a D & C was 58.57%. 3. Ectopic symptoms appeared during the first 4.7 weeks (mean) and most frequently occurred between the 5th and 6th weeks (48.57%) of pregnancy. The Symptoms were: -99.04% complained of lower abdominal pains. -80.95% experienced abnormal uttering bleeding. -42.38% experienced bleeding before the occurrence of pain. -18.57% experienced pain before the occurrence of bleeding. -8.57% experienced both pain and bleeding. -7.62% experienced only bleeding. -22.86% experienced only pain. 9. In-77.62% of the cases the annexal mass palpated. 91.42% complained of abdominal tenderness. 42.38% complained of pain when the cervix was examined. 10. Culdocentesis was performed in 86.19% of the cases. In 92.82% of the cases the presence of an Ectopic pregnancy was accurately diagnosed 11. 71.90% of the Ectopic pregnancies occurred in the ampule portion of the ovarian tube, of the total number of gestations, 40.95% were tubal abortions and 59.05% were ruptured. The ruptured group occurred more frequently in the islamic portion and interstitial portion of the tube than the aborted group. The aborted group occurred more frequently in the fimbrial extremities of the tube. 12. The blood pressure (systolic) was noted at 119-80mmHg in 81.89% of the total cases. Hemoglobin value was noted at over 8gm/㎗ in 58.57% of the cases. The average blood transfusion was 2.3 pints. 13. In 52.86% of the Ectopic pregnancies the right side of the ovarian tube was affected. The left side of the tube was affected in 47.14% of the cases. 14. 3.33% of the patients were not given an accurate diagnosis. 15. The kinds of operation performed were as follows; Salpingectomy, 41.43%; Adnectomy, 38.57% and Adnectomy with total hysterectomy, 19.05%. 16. The patient mortality rate was significantly small; only 1 case out of 210 died. This patient most likely had a profuse hemorrhage because of a ruptured tube before her admission to the hospital. 17. The patients personal feelings and attitudes must be treated with care. Particularly patients who are concerned about vaginal bleeding or the impossibility of another pregnancy.

• Journal of Periodontal and Implant Science
• /
• v.29 no.1
• /
• pp.1-14
• /
• 1999

Ursodeoxycholic acid(UDCA) is a hydrophilic gall bladder acid and has been used as a effective drug for liver disease related to in1munity. This drug inhibits secretions of IL-2, IL-4, and $IFN-{\gamma}$ from T-cells and production of immunoglobulin from B-cells. Also it has been reported that UDCA inhibits production of IL-1 related to the progression of periodontal disease and activation of collagenases. The purpose of the present study was to elucidate the effects of UDCA on inhibition of periodontal disease progression using clinical, microbiological and histometrical parameters. Twelve pure bred, 16 month-old-beagle dogs were used in the study. After ligature-induced periodontal diseases were formed, experimental drugs were applied twice a day and then the results of clinical, microbiological, and histometrical parameters were measured at baselie(initiation of experiment) , 4weeks and 8weeks. The gel with UDCA(concentration 0.5%, 5% 3 dogs in each) was applied to experimental group, chlorhexidine to positive control group(3dogs) and the gel without UDCA(base) to negative control group. After induction of general anesthesia, the maxillary 2nd, 3rd premolars and 1st molar and the mandibular 2nd, 3rd, 4th premolars and 1st molar were ligated in one side selected randomly and were not ligated in the opposite side. The plaque index(PI), gingival index(GI), pocket depth(PD) and gingival crevicular fluid(GCF) volum were measured clinically. The PI and GI were measured at 3 buccal points of all experimental teeth and the GCF was measured only at the 3rd premolar in the maxilla and the 4th premolar in the mandible. In the microbiological study, the samples extracted from the 3rd premolar of the maxilla and the 4th premolar of the mandible at the center of buccal surface were analyzed aerobics, anaerobics and Streptococcus colony forming units, After clinical and microbiological examination at 8weeks, the dogs were sacrificed by carotid artery perfusion. The samples were fixed and sectioned including interproximal area, and the distance from cementoenamel junction(CEJ) to alveolar crest was measured. The results were that PI, GI and PD increased until 4 weeks and decreased at 8 weeks in three groups but the differences between all the groups were not significant. The 0.5% UDCA in non-ligated group showed remarkable decrease of GCF. The experimental group applied 5% UDCA decreased the number of aerobics and anaerobics. The distance from CEJ to alveolar crest was greater in the negative control group on both ligated and non-ligated sides, but the differences were not significant stastically.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.1
• /
• pp.47-58
• /
• 2009

The marketing environment has become competitive to an extent that requires firms to target their products at markets that span national boundaries. However, competitive clout cannot be achieved in global consumer markets unless firms thoroughly understand and adequately respond to the core values and needs of those consumers. Brand equity is one of the most important assets to a company. Especially in sportswear markets, brand equity is the crucial value added to a product by its brand name. Factors such as country of origin also influence customer's attitude towards brand equity. Therefore, this paper discusses the relationship between country of origin effect and brand equity, and how they influence consumers' loyalty for respective brands. This paper focused on the sports shoes market, because it is an increasing area of opportunity for world manufacturers. The objectives of this study were the following. (1) Test the effect of country of origin on brand equity. (2) Test how brand equity influences consumers' brand loyalty. (3) Find whether there are differences in the effects of country of origin and brand equity among the three countries. (4) Find whether there are differences in the effects of country of origin and brand equity among the different lifestyles. Based on the review of literature results, the hypotheses are concluded as the following: H1-a: Country image has positive influence on country of origin. H1-b: Product perception has positive influence on country of origin. H2-a: Perceived quality has positive effect on brand equity. H2-b: Perceived price has positive effect on brand equity. H3: Country of origin has positive effect on brand equity. H4: Brand equity has a positive impact on brand loyalty. Research model was constructed (see Fig. 1). After data analysis, the following results were concluded: sports shoes purchase behavior showed significant differences among Korean, Chinese, and American consumers for favorite brand, purchased brand, purchased place, information usage, and favorite sports games. The results of this study also extend the research of the relationship among country of origin, brand equity and brand loyalty to the sports shoes market. Brand equity was proven to have a significant relationship with brand loyalty for all countries. The factors which can influence brand equity are different for different countries. The third finding of this paper is that we identified different three lifestyles, adventurer, follower, and laggard, for Korean, Chinese and American consumers. Without the nationality boundary, seeing the emergence of a new group of consumers who have similar preferences and buy similar brands is more important. All of the consumers consider brand equity to keep their brand loyalty. Perceived price is the only factor which can influence brand equity for adventurers; brand is more important for them. The laggards were not influenced by any factor. All of the factors expect perceived price are important for the followers. Marketing managers should consider brand equity when introducing their brand into a new market. Also localization is the basic strategy that all the sports shoes companies should understand. But as a global brand, understanding the same characteristics for each country is more important to build global strategy.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.803-810
• /
• 2009

This study is conducted to examine spatial variations of Dissolved Organic Matter (DOM) in stream and waste waters of the different watershed areas (agricultural, residential, and industrial complex area) by using fluorescence 3D-EEMs (3 Dimensional Excitation Emission Matrix Spectroscopy). Furthermore, the research investigates the changes of DOM characterization by synchronous and 3D-EEMs during a rainfall event. The characterizations of DOM obtained by 3D-EEMs show two noticeable peaks at humic and protein-like regions. Humic-like substances (HLS) are found in rural and urban areas, and humic and protein-like substances (PLS) are shown in industrial area. According to the fluorescence peak $T_1:C_1$ ratios, it is observed that high amount of HLS was discharged from Banweol Industrial Complex (3TG). Additionally, linear relationships (Regression rate, $r^2$=0.65, $r^2$=0.66) have been shown between PLS (peak $T_1,\;B_1$) and biochemical oxygen demand (BOD), which indicates the impact of sewage. For the rainfall event (30 mm), no remarkable difference of DOM was found at rural area except increment of fluorescence intensity comparing dry period. In contrast, HLS at urban area is highly discharged within 30 minutes from the beginning of rainfall. Also, there are high influences of HLS and PLS within 20 minutes at industrial complex (4TG). Fluorescence 3D-EEMs has not only verifies a watershed of DOM origination but also monitors diffuse and point source impacts.

• Journal of the Korean earth science society
• /
• v.27 no.4
• /
• pp.390-400
• /
• 2006

The purpose of this study is to propose an improvement plan based on an analysis of the current earth science teacher education curriculum in the department of education in the four fields of teaching profession theory: student-teacher practice, subject lesson education, and subject content education. The following are the conclusions and suggestions of this study. In case of teaching profession theory, too much emphasis is put on pedagogical theory over practical issues, and a problem arises upon completion. Therefore, it is sugguest that teaching profession theory might be completed before subject lesson education to ensure more authentic subjects performing teaching profession. The current term for student-teacher training is too short to understand the whole school system. Current school system does not have any off-job training course or internship system. Therefore, student-teacher training term should be increased by at least $3{\sim}6$ months to play a vital role in the current system. The credit number of subject lesson education is too small compared with subject content education. Consequently, the credit number of subject lesson education should be increased, and more professor majored in subject lesson education should be recruited. Significant deviation between the content of subject content education and that of middle school grade exists, and there is also much difference in the ratio of subject according to university. To get rid of these problems, subject content education should be connected with subject lesson education and appropriate number of credit needs to be assigned to each subject domain.