• 제목/요약/키워드: isolated maximum point

검색결과 27건 처리시간 0.029초

MAXIMUM CURVES OF TRANSCENDENTAL ENTIRE FUNCTIONS OF THE FORM $E^{p(z)}$

  • Kim, Jeong-Heon;Kim, Youn-Ouck;Kim, Mi-Hwa
    • Journal of applied mathematics & informatics
    • /
    • 제29권1_2호
    • /
    • pp.451-457
    • /
    • 2011
  • The function f(z) = $e^{p(z)}$ where p(z) is a polynomial of degree n has 2n Julia lines. Julia lines of $e^{p(z)}$ divide the complex plane into 2n equal sectors with the same vertex at the origin. In each sector, $e^{p(z)}$ has radial limits of 0 or innity. Main results of the paper are concerned with maximum curves of $e^{p(z)}$. We deal with some properties of maximum curves of $e^{p(z)}$ and we give some examples of the maximum curves of functions of the form $e^{p(z)}$.

Bidirectional Power Conversion of Isolated Switched-Capacitor Topology for Photovoltaic Differential Power Processors

  • Kim, Hyun-Woo;Park, Joung-Hu;Jeon, Hee-Jong
    • Journal of Power Electronics
    • /
    • 제16권5호
    • /
    • pp.1629-1638
    • /
    • 2016
  • Differential power processing (DPP) systems are among the most effective architectures for photovoltaic (PV) power systems because they are highly efficient as a result of their distributed local maximum power point tracking ability, which allows the fractional processing of the total generated power. However, DPP systems require a high-efficiency, high step-up/down bidirectional converter with broad operating ranges and galvanic isolation. This study proposes a single, magnetic, high-efficiency, high step-up/down bidirectional DC-DC converter. The proposed converter is composed of a bidirectional flyback and a bidirectional isolated switched-capacitor cell, which are competitively cheap. The output terminals of the flyback converter and switched-capacitor cell are connected in series to obtain the voltage step-up. In the reverse power flow, the converter reciprocally operates with high efficiency across a broad operating range because it uses hard switching instead of soft switching. The proposed topology achieves a genuine on-off interleaved energy transfer at the transformer core and windings, thus providing an excellent utilization ratio. The dynamic characteristics of the converter are analyzed for the controller design. Finally, a 240 W hardware prototype is constructed to demonstrate the operation of the bidirectional converter under a current feedback control loop. To improve the efficiency of a PV system, the maximum power point tracking method is applied to the proposed converter.

고립된 사용자 밀집지역을 위한 D2D 광고 확산 알고리즘 성능 분석 (Performance Evaluation of D2D Advertisement Dissemination Algorithm for Isolated High User-Density Area)

  • 김준선;이호원
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 춘계학술대회
    • /
    • pp.40-42
    • /
    • 2015
  • D2D(Device-to-Device) 통신과 소셜커머스 서비스를 결합한 D2D 광고 확산 알고리즘은 소상공인들을 위한 효율적인 광고를 가능하게 한다. D2D 광고 확산 알고리즘에서는 효율적인 광고 확산을 위해 사용자 밀집도를 기반으로 목표지역을 설정하고 인접한 목표지역들은 그룹을 형성한다. 광고는 형성된 그룹을 기반으로 확산된다. 그룹을 형성하지 못한 고립된 목표지역들은 AP(Access Point)와의 거리에 따라 그룹 형성 여부가 결정한다. 본 논문에서는 시뮬레이션을 통해 고립된 사용자 밀집지역을 위한 최대 거리 변화에 따른 성공적으로 수신한 전체 사용자 수와 평균 릴레이 유저의 수에 대한 성능을 비교 분석한다.

  • PDF

A dP/dV Feedback-Controlled MPPT Method for Photovoltaic Power System Using II-SEPIC

  • Park, Han-Eol;Song, Joong-Ho
    • Journal of Power Electronics
    • /
    • 제9권4호
    • /
    • pp.604-611
    • /
    • 2009
  • A dP/dV feedback-controlled MPPT (Maximum Power Point Tracking) method for photovoltaic power systems using II-SEPIC (Isolated Inverse-SEPIC; Single Ended Primary Inductance Converter) is presented and a current-mode dP/dV feedback-controlled MPPT method is devised to apply for the PV power converter system. A control strategy for the current-mode dP/dV feedback control system is developed in this paper and the proposed MPPT shows relatively satisfactory dynamics against rapidly changing insolation conditions. In order to verify the validity and effectiveness of the proposed method, simulations and experiments of the PV power system using II-SEPlC converter are performed. These simulation and experiment results show that the proposed method enables the PV power system to extract maximum power from the photovoltaic module against the solar insolation variation.

변화점을 갖는 불완전수정 소프트웨어 신뢰도 성장모형 연구 (An Imperfect Debugging Software Reliability Growth Model with Change-Point)

  • 남경현;김도훈
    • 품질경영학회지
    • /
    • 제34권4호
    • /
    • pp.133-138
    • /
    • 2006
  • In this paper, we propose a software reliability growth model (SRGM) based on the testing domain, which is isolated by the executed test cases. This model assumes an imperfect debugging environment in which new faults are introduced in the fault-correction process. We consider that the fault detection rate of NHPP model is changed in the proposed SRGM. We obtain the maximum likelihood estimate, and compare goodness-of-fit with another existing software reliability growth model.

Seismic performance of a building base-isolated by TFP susceptible to pound with a surrounding moat wall

  • Movahhed, Ataallah Sadeghi;Zardari, Saeid;Sadoglu, Erol
    • Earthquakes and Structures
    • /
    • 제23권1호
    • /
    • pp.87-100
    • /
    • 2022
  • Limiting the displacement of seismic isolators causes a pounding phenomenon under severe earthquakes. Therefore, the ASCE 7-16 has provided minimum criteria for the design of the isolated building. In this research the seismic response of isolated buildings by Triple Friction Pendulum Isolator (TFPI) under the impact, expected, and unexpected mass eccentricity was evaluated. Also, the effect of different design parameters on the seismic behavior of structural and nonstructural elements was found. For this, a special steel moment frame structure with a surrounding moat wall was designed according to the criteria, by considering different response modification coefficients (RI), and 20% mass eccentricity in one direction. Then, different values of these parameters and the damping of the base isolation were evaluated. The results show that the structural elements have acceptable behavior after impact, but the nonstructural components are placed in a moderate damage range after impact and the used improved methods could not ameliorate the level of damage. The reduction in the RI and the enhancement of the isolator's damping are beneficial up to a certain point for improving the seismic response after impact. The moat wall reduces torque and maximum absolute acceleration (MAA) due to unexpected enhancement of mass eccentricity. However, drifts of some stories increase. Also, the difference between the response of story drift by expected and unexpected mass eccentricity is less. This indicates that the minimum requirement displacement according to ASCE 7-16 criteria lead to acceptable results under the unexpected enhancement of mass eccentricity.

어린병아리에서 저단백질사료내 제한아미노산의 규명과 함유황아미노산의 요구량 결정 (Identification of Limiting Amino Acids and Determination of Requirement of Total Sulfur-containing Amino Acids in a Low Protein Diet in Young Chicks.)

  • Chee, Kew-Mahn
    • 한국가금학회지
    • /
    • 제11권1호
    • /
    • pp.1-12
    • /
    • 1984
  • 저단백질(13% C. P.) 사료는 어린 병아리에서 단백질급원의 Net Protein Utilization가 조사하거나 또는 아미노산의 불균형을 연구할 때 적절한 방법으로 인정되고 있다. 이때의 기준 단백질로서 정제된 대두단백을 많이 이용하고 있으나 이런 사료의 제한 아미노산에 대한 연구가 되어 있지 않다. 본 연구에서는 사료내 유일한 단백질급원으로서 isolated soy protein을 15% 수준으로 함유한 purified-type의 기초사료에서 제한 아미노산을 규명하고 이의 요구량을 조사하였다. 어린병아리의 기초사료에 methionine, lysine, threonine 및 tryptophan 등을 단독으로 또는 두개 이상을 같이 첨가해서 급여한 결과. methionine만이 결핍된 것으로 나타났다. 총함유황아미노산(TSAA)의 요구량을 dose-response curve 방법에 의해 반응선과 plateau선과의 상호교차점에서 구하였는데, 최대의 성장과 사료섭취량을 위한 요구량은 각각 사료단백질의 4.73%와 3.73% 수준이였다. 이들 수치를 TSAA의 섭취량을 기준으로 표시해 보면 최대성장율, 사료섭취량 및 사료효을을 위해 각각 167.7, 136.8 및 159.7mg/bird/day의 양이 필요하였다.

  • PDF

A Flyback-Assisted Single-Sourced Photovoltaic Power Conditioning System Using an Asymmetric Cascaded Multilevel Inverter

  • Manoharan, Mohana Sundar;Ahmed, Ashraf;Park, Joung-Hu
    • Journal of Power Electronics
    • /
    • 제16권6호
    • /
    • pp.2272-2283
    • /
    • 2016
  • This paper proposes a power conditioning system (PCS) for distributed photovoltaic (PV) applications using an asymmetric cascaded multilevel inverter with a single PV source. One of the main disadvantages of the cascaded multilevel inverters in PV systems is the requirement of multiple isolated DC sources. Using multiple PV strings leads to a compromise in either the voltage balance of individual H-bridge cells or the maximum power point tracking (MPPT) operation due to localized variations in atmospheric conditions. The proposed PCS uses a single PV source with a flyback DC-DC converter to facilitate a reduction of the required DC sources and to maintain the voltage balance during MPPT operation. The flyback converter is used to provide input for low-voltage H-bridge cells which processes only 20% of the total power. This helps to minimize the losses occurring in the proposed PCS. Furthermore, transient analyses and controller design for the proposed PCS in both the stand-alone mode and the grid-connection mode are presented. The feasibility of the proposed PCS and its control scheme have been tested using a 1kW hardware prototype and the obtained results are presented.

공통선 신호망의 토폴로지 설계 알고리즘에 관한 연구 (A Study on the Topology Design Algorithm for Common Channel Signalling Network)

  • 이준호;김중규;이상배;박민용
    • 전자공학회논문지B
    • /
    • 제28B권5호
    • /
    • pp.369-381
    • /
    • 1991
  • In this paper, design algorithms for SMP(Single Mated Pair) and MMP (Multipli Mated Pair) structure of CCS (Common Channel Signaling) network are proposed through the study of the structure of CCS network. High reliability and fast messagy transfer time are the most important requirements for the CCS network. Based on it, three parameters such as monotraffic, reliability (maximum isolated SP(Signalling Point) number when any two STP(Signalling Transfer Points) fail and total network cost are defined. And the proposed algorithms different from preexisted algorithm that minimizes total network cost, maximize monotraffic with two constraints, reliability and total network cost. Comparing the experimental results of the proposed algorithms with those of the preexisted algorithm that minimizes total network cost, shows that the proposed algorithms produce a more reliable topology that has more monotraffic and a little higher total network cost. Additionaly, with the results of the proposed algorithms, SMP and MMP structures are compared.

  • PDF

차량용 항법장치에서의 관심지 인식을 위한 다단계 음성 처리 시스템 (Multi-layer Speech Processing System for Point-Of-Interest Recognition in the Car Navigation System)

  • 방기덕;강철호
    • 한국멀티미디어학회논문지
    • /
    • 제12권1호
    • /
    • pp.16-25
    • /
    • 2009
  • 안전성을 최우선시 해야 하는 자동차 환경에서 관심지 (POI, Point-Of-Interest) 도메인을 대상으로 하는 대용량 고려 단어 인식 시스템은 최적의 인간-기계 상호접속(HMI, Human-Machine Interface) 기술을 요구하고 있다. 하지만, 매우 제한된 연산처리 능력과 메모리를 가지는 텔레매틱스 단말기에서 10만 단어 이상을 일반적인 음성인식 방식으로 처리하기는 불가능하다. 따라서 본 논문에서는 텔레매틱스 단말기의 관심지 인식을 위하여 다단계 구조의 대용량 고립단어 인식 시스템을 제안하였다. 이 관심지 인식 시스템의 성능향상을 위해 음소별 가우시안 혼합모델(GMM, Gaussian Mixture Model)을 사용한 음소 인식기와 음소별 거리 행렬(PDM, Phoneme-distance Matric) 레빈쉬타인(Levenshtein) 거리를 제안하였다. 제안한 방법은 낮은 처리속도와 적은 양의 메모리를 가지는 텔레매틱스 단말기에서도 대용량 고립단어에 대하여 우수한 인식 성능을 나타내었다. 본 논문에서 제안한 다단계 인식 시스템을 사용하였을 경우 실내에서 최대 94.8%, 자동차환경에서는 최대 92.4%의 인식 성능을 얻을 수 있었다.

  • PDF