• 통합자연과학논문집
• /
• 제6권1호
• /
• pp.1-7
• /
• 2013

Polyurethane resin containing isocyanate is marked by excellent tensile and mechanical strengths and this test aims to gauge its applicability as a medical high polymer. Tris [2-(acryloyloxy)ethyl]isocyanurate and hexamethylenediisocyanate were added to a basic mixing ratio of HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), NVP (n-vinyl-2-pyrrolidone) and crosslink agent, EGDMA (ethylene glycol dimethacrylate) with increasing proportions and copolymerized respectively. Also, the basic physical properties of the polymerized high polymers including refraction rate, tensile strength, light transmission and water content were measured to confirm that they are appropriate as hydrogelcontact lenses. After measuring the physical properties of high performance polymers produced by adding tris [2-(acryloyloxy) ethyl]isocyanurate, it was found that the average tensile strengths of sample TRIS1 to TRIS10 were between 0.285 and 0.612 kgf, while the average values of refractive index were ranged from 1.441 to 1.449 with water content from 30.00 to 37.35%.The measurement of physical properties of the copolymers generated by adding hexamethylenediisocyanate showed that the average tensile strength of sample HEXA1 to HEXA10 ranged from 0.267 to 1.742 kgf, the refractive index ranged from 1.443 to 1.475 and water contents were in the range of 21.22 to 35.58%. In all combinations the transmission rates satisfied the transmittance of general hydrogel contact lenses. From theresults, it is possible to conclude that the produced copolymers can be used as contact lens materials with excellent tensile strength.

• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.131-139
• /
• 2011

This study surveyed on the synthesis of one-step type hydrophilic non-porous PU resin and the physical property of the coated fabric for the garment. Three kinds of chain extender such as MEG, 1,4-BD and NPG were used for the preparation of one-step type hydrophilic non-porous PU resin in order to examine the effect of chain extender on the physical properties of PU-coated fabric. And the effects of isocyanate on the physical properties of PU coated fabric were surveyed by mixing with various TDI and MDI ratios. In addition, the physical properties of the coated fabric treated with one-step type hydrophilic non-porous PU resin were examined according to the pre-treatment conditions such as cire finishing. Finally, the washing durability of the coated fabrics was assessed. The coated fabrics treated with PU resin synthesized with PEG1000, MEG and TDI/MDI (6/4) showed the best physical properties. Considering the pre-treatment conditions, best performance of hydraulic pressure, water vapor permeability, and water repellency were obtained with top roller rotation ratio of 150% under 50 ton pressure at $170^{\circ}C$.

• 분석과학
• /
• 제6권5호
• /
• pp.435-442
• /
• 1993

루빈산이 결합된 카르복시메틸화된 폴리아민-폴리우레아(RCCPPI) 수지가 클로로카르복시메틸화된 폴리아민-폴리우레아(CCPPI) 수지와 루빈산으로부터 1단계 반응에 의하여 합성되었다. 이 수지의 구조는 적외선 분광광도법, 원소분석 및 시차열분석법으로 확인되었다. 이 수지에 대한 중금속 흡착특성은 용액의 pH를 변화시키면서 뱃치법에 의하여 분포계수($K_d$)를 측정하고, 프론탈크로마토그래피법으로 관류점을 측정하여 조사하였다. 중금속 이온용액을 이 수지로 충진된 관에 통과시킴에 의하여 고농도의 나트륨, 칼슘 및 아세트산염 용액 중에 존재하는 미량 중금속 이온을 최적 pH에서 농축 및 회수 정량할 수 있었다. 농축 인자는 25 이상이었고 흡착된 중금속들은 0.025M EDTA 용액(pH 9.0)으로 회수 정량하였다.

• 공업화학
• /
• 제9권2호
• /
• pp.238-242
• /
• 1998

복합체 제조의 최적조건을 얻기 위해 페놀수지와 목분의 함량을 변화시켜 제조하고 그들의 기계적 성질을 측정하였다. 페놀수지의 함량이 45 wt%일 때 가장 높은 기계적 강도를 나타내었다. 또한 페놀수지와 목분 복합체의 기계적 성질을 개선하기 위해 페놀수지의 개질제로서 폴리우레탄을 사용하였다. Isocyanate 작용기를 갖는 폴리우레탄은 페놀수지와 잘 혼합되지 않기 때문에 상용성을 개선하기 위해 페놀 blocked 폴리우레탄을 합성하였다. 이들을 첨가한 복합체는 개질제 함량이 5 wt%에서 최대의 기계적 강도를 나타냈다. 또한 $210^{\circ}C$에서 경화된 복합체의 기계적 강도가 $150^{\circ}C$에서 경화된 것보다 우수하였다.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1128-1135
• /
• 2019

이소시아네이트와 아민의 빠른 반응성으로 인해 고가의 전용 도포 설비가 있어야만 시공이 가능하였던 우레아 수지를, 일반적인 도포 설비로도 시공이 가능하도록 수분산 상태의 우레아 수지를 합성하기 위한 조건을 설정하기 위하여, 1차적으로 분자량과 관능기의 수가 다른 폴리이서 아민과 다이이소시아네이트를 사용하여 기계적 물성이 우수한 수분산 우레아 수지 합성 조건을 찾고, 2차적으로 DMPA [2,2-Bis(hydroxymethyl)propanoic acid]의 함량이 수분산 우레아 수지의 수분산 안정성에 미치는 영향을 연구하였다. 우레아기의 형성은 FT-IR ATR 분광법으로 확인하였다. 그 결과 수분산 우레아수지의 기계적 물성은 분자량과 관능기 수가 다른 폴리이서 디아민과 폴리이서 트리아민을 함께 투입한 PU-4와 PU-6 배합의 경우, 각각 인장강도가 10.5 N/㎟, 12.7 N/㎟ 및 신장률이 1165 %, 969 %로 우수하였다. 또한, 인장강도가 가장 높은 PU-6 배합에 DMPA을 0.5 몰 첨가하여 합성한 후 트리에틸아민으로 중화시킨 수분산 우레아 수지가 14.2 N/㎟의 인장강도와 993 %의 신율로 가장 우수하였으며, 8 주 동안의 저장안전성 평가에서도 수분산 상태가 가장 안정하게 유지되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.38-45
• /
• 2007

Flakeboards made from ring- and drum-cut flakes of Douglas-fir, hemlock, red lauan and kapur using two kinds of resin levels were evaluated for the selected properties according to flake thickness. The pH and buffering capacity of four species were determined. Those of kapur were extremely different from the other three species. These pH and buffering capacity values result in the poor internal bond strength of kapur flakeboard. The internal bond strength was affected significantly by flake thickness, resin content and species. MOR and MOE in bending strength were maximized at medium drum-cut flake thickness. Screw holding strength was not consistent for flake thickness, but it was influenced by species. Thickness swelling and water absorption of Douglas-fir and hemlock flakeboard were minimized at medium drum-cut flake thickness.

• Elastomers and Composites
• /
• 제25권3호
• /
• pp.195-202
• /
• 1990

Rubber-modified polyurethane resin which was prepolymer type terminated with NCO, was synthesized by reacting isocyanate groups[NCO] and hydroxyl groups[OH]. Polybutadiene rubbers which had OH groups in the side of rubber chains, were charged at ratio $0%{\sim}40%$ of solid component in reactants. For products, physical properties were investigated experimentally. The results abtained in experiment were as follows. 1. Liquid resin and dried film was good solubility and clearity at less than 25%, 20% of rubber without being related to sort. 2. G-1000 showed better properties than R-45HT in solubility, dring time and adhesive strength. 3. Dring time and adhesive strength were considerably influenced by molecular weigh and structure of rubber. 4. In using 25% of mixed rubber(G-1000/R-45HT=50/50), It represented best properties in dring time(10 minute) and adhesive strength($23Kg/cm^2$).

• 공업화학
• /
• 제24권2호
• /
• pp.148-154
• /
• 2013

UV 경화형 아크릴 점착제는 세상에서 매우 다양한 형태로 이용되는데, 반도체 산업을 기반으로 하는 웨이퍼 제조공정에서도 이용되고 있다. 특히 반도체에 사용되는 웨이퍼가 더욱 얇아짐에 따라, UV 경화형 아크릴 점착제는 더욱 적절한 점착 성능을 요구 받고 있다. 본 연구는 2-EHA (2-ethyl hexyl acrylate), 2-EHMA (2-ethyl hexyl methacrylate), SM (styrene monomer), 2-HEA (2-hydroxy ethyl acrylate), acrylic acid 모노머를 이용하여 hydroxy기를 가진 아크릴 수지점착제를 합성한 후 MOI (methacryloyloxyethyl isocyanate)의 투입량 조절을 통한 경화 특성을 향상시킬 수 있는 부가반응을 시킨 이소시아네이트 변성 아크릴 수지 점착제를 제조하여, 적절한 접착 성능을 알아보고, 수산기 값의 정도와 UV 조사량의 차이에 따라 웨이퍼 제조의 최적화된 조건을 찾았다. 시험 결과 UV 경화형 점착제에서 수산기(Hydroxyl group, -OH)와 이소시아네이트기(isocyanate group, -NCO)의 1 : 1 당량비로 이소시아네이트 경화제를 사용할 경우 수산기값이 클수록, UV 조사 전 박리력이 감소하였다. UV 조사량이 증가할수록 높은 경화 특성 때문에 박리접착 강도는 낮아졌다.

• 한국산업보건학회지
• /
• 제11권3호
• /
• pp.249-253
• /
• 2001

The purpose of this study is the development of the simple and precise sampling and analysis method of methyl isocyanate(MIC) in the work place as their secondary aliphatic amine derivatives by gas chromatography with flame ionization detector. The urea derivatives are quantitatively and simultaneously derived from MIC with secondary aliphatic amines such as dipropylamine(DPA), dibutylamine(DBA), and dipentylamine (DAA) in methylene chloride. The method is based on sampling glass tube in XAD-2 resin which is coated with secondary aliphatic amines. The samples are desorbed by $2m{\ell}$ methylene chloride and analysed using gas chromatography with flame ionization detector(GC/FID). In the results, the detection limit of the overall procedure and reliable quantity are $0.020-0.027{\mu}g$($1.347-1.740{\mu}g/m^3$(0.529-0.684 ppb) based on a 15 L air volume) MIC per sample. The average desorption efficiencies are 97.96 - 101.23 %. The results of versus storage time are high and stable recovery rates.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.371-378
• /
• 2005

In the previous study, three kinds of monomers and the functional monomer, acetoacetoxyethyl methacrylate (AAEM), which could improve the film property and cross-linkage, were polymerzied into acrylic resin copolymers (HSA-98-20, HSA-98-0, HSA-98+20) containing 80% solid content. In this study, the high-solid coatings(HSA-98-20C, HSA-98-0C, HSA-98+20C) were prepared by the curing reaction between acrylic resins containing 80% solid content and isocyanate at room temperature. Various properties were examined for the film coated with the prepared high-solid coatings. The introduction of AAEM in the coatings enhanced the abrasion resistance and solvent resistance of coatings, which indicated the possible use of high-solid coatings for top-coating materials of automobile. The curing times measured by viscoelastic measurement were 350, 264, and 212 min for HSA-98-20C, HSA-98-0C, and HSA-98+20C, respectively. This shows that the curing times become shorter with increasing $T_g$ values.