• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.2
• /
• pp.129-136
• /
• 2005

This paper presents a design strategy of SPOKE type BLDC motors considering an irreversible demagnetization of a permanent magnet (PM). So the irreversible demagnetization characteristic of the motor is analyzed by rotor structure. The instantaneous currents in either starting or lock rotor condition, which are calculated from the current dynamic analysis, are applied to the analysis of the irreversible demagnetization field by FEM. In irreversible demagnetization analysis by FEM, the variation of residual flux density in PM is analyzed using the non-linearity of magnetic core on B-H plan. The analysis results are compared to several rotor structures and used for optimize the rotor structure.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.36-40
• /
• 2018

In this study, the electromechanical properties in Sn-Cu double layer stabilized GdBCO coated conductor (CC) tapes with and without external lamination under uniaxial tension were examined at 77 K and self-field. Their irreversible stress and strain limits were determined using a loading-unloading scheme based on different critical current ($I_c$) recovery criteria. The repeated tests were performed and statistical estimation was done to check the reproducibility depending on the criterion adopted in evaluating the electromechanical properties. From the results, it showed that the Sn-Cu double-layer stabilized CC tapes have the higher irreversible stress limit, but lower irreversible strain limit as compared to brass laminated ones. Through the repeated tests, it can be found that a small scattering of irreversible limits existed in both CC tape samples. Finally, similar strain sensitivity of $I_c$ in both CC tapes was obtained.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.3
• /
• pp.6-9
• /
• 2016

The enhancement of mechanical properties of coated conductor (CC) tapes in practical application are usually achieved by reinforcing through lamination or electroplating metal layers on either sides of the CC tape. Mechanical or electromechanical properties of the CC tapes have been largely affected by the lamination structure under various loading modes such as tension, bending or even cyclic. In this study, the influence of brass laminate volume fraction on electromechanical properties of RCE-DR processed Gadolinium-barium-copper-oxide (GdBCO) CC tapes was investigated. The samples used were composed of single-side and both-side laminate of brass layer to the Cu-stabilized CC tape and their $I_c$ behaviors were compared to those of the Cu-stabilized CC tape without external lamination. The stress/strain dependences of $I_c$ in laminated CC tapes under uniaxial tension were analyzed and the irreversible stress/strain limits were determined. As a result, the increase of brass laminate volume fraction initially increased the irreversible strain limit and became gradual. The corresponding irreversible stress limit, however, showed no difference even though the brass laminate volume fraction increased to 3.4. But the irreversible load limit linearly increased with the brass laminate volume fraction.

• Carbon letters
• /
• v.1 no.3_4
• /
• pp.148-153
• /
• 2001

The initial irreversible capacity, $Q_i$, is one of the parameters to express the material balancing of the cathode to anode. We introduced new terms, which are the initial intercalation Ah efficiency (IIE) and the initial irreversible specific capacity at the surface ($Q_{is}$), to express precisely the irreversibility of an electrode/electrolyte system. Two terms depended on kinds of active-materials and compositions of the electrode, but did not change with charging state. MPCF had the highest value of IIE and the lowest value of $Q_{is}$ in 1M $LiPE_6$/EC + DEC (1 : 1 volume ratio) electrolyte. IIE value of $LiCoO_2$ electrode was 97-98%, although the preparation condition of the material and the electrolyte were different. $Q_{is}$ value of $LiCoO_2$ was 0~1 mAh/g. MPCF-$LiCoO_2$ cell system had the lowest of the latent capacity. $Q_{is}$ value increased slightly by adding conductive material. IIE and $Q_{is}$ value varied with the electrolyte. By introducing PC to EC+DEC mixed solvent, IIE values were retained, but $Q_{is}$ increased. In case of addition of MP, IIE value increased and $Q_{is}$ value also increased a little.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.5
• /
• pp.189-193
• /
• 2003

Initial irreversible capacity (IIC) can be defined by means of the initial intercalation Ah efficiency (IIE) and the initial irreversible specific capacity at the surface (IICs) with the linear-fit range of the intercalation so as to precisely express the irreversibility of an electrode-electrolyte system. Their relationship was IIC = Qc - Q$_{D}$ = (IIE$^{-1}$ - 1) Q$_{D}$ + IICs in the linear-fit range of IIE. Here, Qc and Qd signify charge and discharge capacity, respectively, based on a complete lithium ion battery cell. Charge indicates lithium insertion to carbon anode. Two terms of IIE and IICs depended on the types of active materials and compositions of the electrode and electrolyte but did not change with charging state. In an ideal electrode-electrolyte system, IIE and IICs would be 100%, 0 mAh/g for the electrode and mAh for the cell, respectively. These properties can be easily obtained by the Gradual Increasing of State of Charge (GISOC).OC).

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.93-96
• /
• 2000

A diffusion-influenced pseudo-first order reversible reaction A + B ⇔C + B is investigated by the molecular dynamics (MD) simulation method. Theoretical finding that the temporal evolution of reactants [conditional probabilities] in the reversible system can be expressed by the irreversible survival probability with an effective rate parameter is confirmed even in the presence of solvent particles. We carry out molecular dynamics simulations for both the irreversible and the reversible cases to evaluate the survival and the conditional probabilities for each cases. When the resultant irreversible survival probability is inserted into the proposed relation, the conditional probabilities given by the simulation are exactly reproduced.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.57-63
• /
• 1994

Digital simulation program for one-dimensional geometric systems of electrochemical phenomena was developed. The accuracy of the digital simulation is discussed by comparing with the known solutions. Applying this program to the linear sweep voltammetry at a planar electrode for the electrode reaction, 0 + ne${\to}$R, the accurate current functions for the reversible and totally irreversible charge transfer systems were obtained. Comparing these current functions with the simulated voltammograms for various other values of ${\alpha}$ (0.1 to 1.0) and ${\Lambda}\;(10^{-5}\;to\;10^5)$, the revised zones that are different from those proposed by Matsuda and Ayabe for the reversible and totally irreversible systems are proposed. For ${\alpha}{\ge}$0.1 the reversible zone is in ${\Lambda}{\ge}10^{1.7}$ and the totally irreversible zone is in ${\Lambda}{\le}10^{-1.7}$, where ${\Lambda}=k^{\circ}/ [D_o^{1-{\alpha}}D_R^{\alpha}(nF/RT)v]^{1/2}$.

• Journal of Digestive Cancer Reports
• /
• v.8 no.1
• /
• pp.61-64
• /
• 2020

Ablative therapy has drawn attention for cancer treatment as minimally invasive therapy. Recently, irreversible electroporation which has a different concept from the existing ablation method has emerged. Although gastrointestinal tract cancer is commonly managed by ablation such as liver, pancreas cancer, hollow viscus cancer is extremely challenging for applying ablative therapy because of its high perforation risk. Therefore, several studies about hollow viscus irreversible electroporation will be introduced in this review regarding its pre-clinical relevance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1661-1667
• /
• 2013

This paper studies the dynamic irreversible demagnetization characteristics of an interior permanent magnet (PM) brushless DC motor with a stator turn fault. A new algorithm, which is a finite element method (FEM) combined with a line voltage equation of the motor, is developed to analyze irreversible demagnetization under dynamic and transient states and considers a stator turn fault. The input current, circulating current, magnetic distribution characteristics, and operating property of the PM, including the irreversible demagnetization in the fault state, are analyzed using this algorithm by considering the magnetic saturation effect. The feasibility of the proposed method confirmed from the analysis results is verified via an experiment. Through this fault analysis, we can accurately check the fault phenomena of a PM motor against the demagnetization fault for fault prevention.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.4
• /
• pp.269-282
• /
• 2021

This review aimed to assess and compare the outcomes of the anesthetic efficacy of inferior alveolar nerve block (IANB) and Gow-Gates mandibular nerve block (GGMNB) in patients with symptomatic irreversible pulpitis. A descriptive systematic review of quantitative research was conducted wherein the "Preferred Reporting Items for Systematic Reviews (PRISMA)" was adopted, and the Problem/Patient/Population, Intervention/Indicator, Comparison, Outcome (PICO) criteria were used to structure the research question. A literature search was performed using PubMed/Medline, Cochrane Library, Google Scholar, and Ovid. Selection criteria were applied for populations over nine years of age, of either sex, with irreversible pulpitis, and articles published in English regarding conventional IANB or IANB and Gow-Gates techniques between 2009 and 2019. Prospective randomized clinical trials or randomized controlled trials were included in the review, in which anesthetic efficacy or success was measured. After screening, four articles were included. Three studies were randomized clinical trials, and two were randomized controlled trials. The validity and reliability of the individual studies were examined. There was evidence of the higher efficacy of the GGMNB technique than that of the IANB technique. However, both techniques can be mastered through training.