• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.87-94
• /
• 2002

전원위상이 다른 전차선 구간을 전기적으로 구분하기 위한 절연구분장치 중에서 특히, 지하구간에 설치된 교/직 절연구분장치는 강체가선 및 조가선 가선이 혼합된 특수한 가선구조로 되어 있어, 전동차 팬터그래프와 습동하는 절연재에 불규칙한 파상마모 현상이 발생한다. 본 논문에서는, 이와 같은 절연구분장치 절연재의 마모현상에 대하여, 현장 측정을 통하여 마모정도 및 마모형태를 조사하고, 전기철도 운행 및 유지보수에 미치는 영향을 분석하였다. 그리고. 절연재 이상마모에 영향을 미칠 수 있는 요인으로서, 절연구분장치의 설치높이 편차와 팬터그래프 압상력에 대응한 절연구분장치의 변위에 대한 실험적 분석을 수행하였고, 절연구분장치와 팬터그래프간에 작용하는 접촉력에 대한 이론적 분석을 통하여 그 발생원인을 규명하였다. 이와 같은 실험적, 이론적 분석을 토대로, 효과적인 절연구분장치 개량방법을 제시하였다.

• Elastomers and Composites
• /
• 제58권2호
• /
• pp.87-94
• /
• 2023

Abrasion tests of an SBR compound were conducted using four different types of abrasion testers (cut and chip, Lambourn, DIN, and LAT100). The abrasion test results were analyzed in terms of size distributions and morphologies of the wear particles. Most wear particles were larger than 1000 ㎛. The wear particle size distributions tended to decrease as the particle size decreased. Except for the Lambourn abrasion test, the wear particles smaller than 212 ㎛ were rarely generated by the other three abrasion tests, implying that small wear particles were produced through friction by introducing talc powder. Shapes of the wear particles varied depending on the abrasion testers. The wear particles generated from the Lambourn abrasion tester had stick-like shapes. The cut and chip abrasion test showed a clear abrasion pattern, but the DIN abrasion test did not show any specific abrasion pattern. The Lambourn and LAT100 abrasion tests showed irregular abrasion patterns.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.7-13
• /
• 2008

It is important to prevent roll failure in hot rolling process for reducing maintenance cost and production loss. The relationship between rolling pass schedule and the work roll wear profile will be presented. The roll wear pattern is related with roll catastrophic failure. The irregular and deep roll wear pattern should be removed by On-line Roll Grinder(ORG) for roll failure prevention. In this study, a computer roll wear prediction model under real process working condition is developed and evaluated with hot rolling pass schedule. The method of building wear calculation functions for center portion abrasion and marginal abrasion respectively was used to develop a work roll wear prediction mathematical model. The three type rolling schedule are evaluated by wear prediction model. The optimum roll grinding methods is suggested for schedule tree rolling technique.

• 대한소아치과학회지
• /
• 제24권1호
• /
• pp.112-124
• /
• 1997

According to extensive use of composite resin which have superior esthetic property, every effort on improving bonding strength between a tooth and composite resin has been continued. Acid etching technique is a method that micro-etches the tooth surface which provides bonding with composite resin possible. Recently, there were several reports that mechanical treatment obtained from air-abrasion can provide similar bonding strength with acid etching technique. So, this experimental study was designed to compare the shear bonding strength between using air-abrasion technique and using acid etching technique. Initially, bovine teeth were divided into enamel and dentin experimental groups. Respectively each group was categorized into three subgroups. One subgroup was acid etched with 35% phosphoric acid, then bonded with composite resin. The other subgroup was air-abraded with $50{\mu}m$ $Al_2O_3$ particles sprayed with 160psi air pressure using air abrasion unit(KCP-1000, A.D.T., U.SA), and composite resin was bonded. In another subgroup, composite resin was bonded after acid etching following air-abrasion. So, enamel experimental groups were made of E1 (acid etched only), E2(air-abraded only), E3(acid etched following air-abraded), and dentin experimental groups were made of D1(acid etched only), D2(air-abraded only), D3(acid etched following air-abraded). Each subgroup had 10 specimens. Dentin bonding system(Scotchbond Multi-purpose, 3M Co., U.S.A.) and composite resin(Z-100, 3M Co., U.S.A.) were applied on treated surface using 5mm diameter gelatin capsule as manufacturer's direction. After 1200 times thermocycling between $5^{\circ}C$ and $55^{\circ}C$, shear bond strength was measured in 5mm/min crosshead speed with Instron(Instron Co., U.S.A.), and also treated enamel and dentin were observed with SEM(JEOL Co., Japan). The following results were obtained: 1. In the enamel experimental groups, acid etched following air-abraded group had highest shear bond strength, but there was no significant difference compared to acid etched group. Air-abraded only group had lowest shear bond strength, and there was significant difference compared to the rest of groups. 2. In the dentin experimental groups, acid etched following air-abraded group had highest shear bond strength, but there was no significant difference compared to acid etched group. Air-abraded only group had lowest shear bond strength, and there was significant difference compared to the rest of groups. 3. In the SEM study, air-abraded enamel and dentin had irregular and rough surfaces.

• 한국농공학회지
• /
• 제43권2호
• /
• pp.132-139
• /
• 2001

This study deals with coal-mine waste (CMW) for use in concrete as a replacement of normal aggregates. The CMW was collected from Sabuk region. Ganwon-do. Fine and coarse aggregates from CMW were prepared by using a crusher and separating debris with #4 sieve. CMW aggregates showed good physical and mechanical properties with having specific gravity over 2.65, absorption less than 1%, and abrasion ratio below 20%. However, particle shape of CMW was poor because of non-isotropic nature of matrix which cause particles to be long or flat. Since irregular particles caused a poor workability, to make workability better, a 1/4 of coarse aggregate was replaced with normal aggregate together with a superplasticizer. Compressive strength and other mechanical properties of CMW concrete were very good. Color of the concrete was darker than normal concrete due to black color of CMW. In conclusion, characteristics of CMW concrete was acceptable for use as a structural concrete material.

• Restorative Dentistry and Endodontics
• /
• 제32권3호
• /
• pp.180-190
• /
• 2007

이 연구는 강화형 미세입자 복합레진인 Micronew에 Biscover 레진전색제를 적용한 후 칫솔마모시험을 시행하여 복합레진 표면의 조도와 현미경적 변화를 비교함으로써 레진전색제를 복합레진 표면에 재적용할 시기를 알아보고자 하였다. 분리 가능한 알루미늄 판과 복합레진을 이용하여 $8\times3\times2mm$ 크기의 복합레진 시편 200개를 제작하였다. 복합레진 시편의 양쪽표면을 Sof-Lex disc로 거친 입자에서 중간 입자까지 마무리한 후 실온의 증류수에 24시간 동안 보관하였다. 시편은 disc로 마무리만 시행한 F군 (n = 10)과 마무리 후 레진전색제인 Biscover를 적용한 B군 (n = 190)으로 분류하였다. B군은 다시 칫솔질을 가하지 않은 B-IM군 (n = 10)과 칫솔질을 가한 군 (n = 180, B-1군에서 B-18 군)으로 분류하였다. 칫솔질을 가한 군은 칫솔마모검사기의 수조에 페리오 치약과 증류수를 무게 비 50 : 50으로 혼합하여 부은 다음, 홈이 파진 알루미늄 블록에 각 군의 시편을 위치시키고 칫솔을 고정장치에 부착하여 전, 후 왕복운동을 가하여 칫솔질을 가하였다. 칫솔질은 B-1 군에서 B-18군 까지 각각 900회씩 증가시켜 16,200회 까지 시행하였다 표면조도측정기를 사용하여 각 군의 복합레진 표면의 평균 표면조도 값 (Ra)을 산출한 후 통계적으로 분석하였고, 주사전자현미경하에서 각 군의 대표적인 시편 1개를 관찰하여 다음과 같은 결과를 얻었다. 1. F군의 Ra는 $0.898{\pm}0.145{\mu}m$, B-IM군의 Ra는 $0.289{\pm}0.142{\mu}m$를 나타냈으며, B-1 군에서 B-18 군까지의 Ra는 점차적으로 증가하여 B-1 군에서 $0.299{\pm}0.48{\mu}m$, B-18 군에서 $0.642{\pm}0.313{\mu}m$까지 나타났다. 2. Ra 최종 군집중심은 군집 1 $(B-IM\simB-7)$에서 $0.361{\mu}m$, 군집 2 $(B-8\simB-14)$에서 $0.511{\mu}m$, 군집 3 $(B-15\simB-18)$에서 $0.624{\mu}m$를 나타내어 각 군집의 Ra 최종 군집중심 간에 통계학적으로 유의한 차이를 나타내었다. (F = 49.705, p = 0.000) 3. B-IM군의 Ra 증감율은 F 군에 비해 210.72%감소되었으며, B-8 군과 B-15군의 Ra 증감율은 B-IM군에 비해 각각 35.49%와 51.35% 증가되었다. 4. FE-SEM 관찰에서 B-IM 군은 매우 평활한 복합레진 표면을 나타내었고, B-8 군은 전체적으로 평활한 복합레진 표면을 보였지만 표면에 수직으로 아주 얕은 흠집을 나타내었다. B-15 군은 복합레진 표면의 중앙에서 B-8군보다 더 넓고 불규칙한 수직의 흠집을 나타내었고, B-18군은 복합레진 표면 전체에 넓은 흠집을 나타내었다.

• 비파괴검사학회지
• /
• 제29권3호
• /
• pp.214-218
• /
• 2009

The occlusal force of the tooth leads to loss of tooth tissue owing to attrition and abrasion, and may cause abfraction and pathological change of the dentin. Thus, we developed finite element models, examined them by applying ordinary occlusal force, and analyzed the stress distribution. Specimens used were mandibular first premolars from 15 Korean males and 13 females and were made into finite element models from medical images that were obtained using a Micro-CT. We have found that the irregular feature of the tooth is not only useful to masticating and pronouncing as well known, but it is also suitable for protecting inner tissue by dispersing stress and delivering proper pressure to periodontal tissue to continue a physiological action. Also, image analysis could let us know the factor that is the cause of a disorder due to stress concentration in the cervical line. These results are expected to support the field of dental treatment planning, operating procedure and clinical trial, and the advance of technical expertise to develop implants and dentures.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.1-10
• /
• 2018

Anodic oxidation treatment of metals is one of typical surface finishing methods which has been used for improving surface appearance, bioactivity, adhesion with paints and the resistances to corrosion and/or abrasion. This article provides fundamental principle, type and characteristics of the anodic oxidation treatment methods, including anodizing method and plasma electrolytic oxidation (PEO) method. The anodic oxidation can form thick oxide films on the metal surface by electrochemical reactions under the application of electric current and voltage between the working electrode and auxiliary electrode. The anodic oxide films are classified into two types of barrier type and porous type. The porous anodic oxide films include a porous anodizing film containing regular pores, nanotubes and PEO films containing irregular pores with different sizes and shapes. Thickness and defect density of the anodic oxide films are important factors which affect the corrosion resistance of metals. The anodic oxide film thickness is limited by how fast ions can migrate through the anodic oxide film. Defect density in the anodic oxide film is dependent upon alloying elements and second-phase particles in the alloys. In this article, the principle and mechanisms of formation and growth of anodic oxide films on metals are described.

• 대한치과보철학회지
• /
• 제59권2호
• /
• pp.153-163
• /
• 2021

목적: 본 연구는 지르코니아의 거칠기 증가를 위한 4가지 표면처리 방법과 3종의 레진시멘트가 전단결합강도에 미치는 영향을 알아보고자 하였다. 재료 및 방법: 총 120개의 지르코니아 시편을 표면처리 방법에 따라 4개의 군으로 나누었다: 대조군, 아무 처리를 하지 않은 군; APA50군, 50 ㎛ 크기의 Al2O3로 Airborne-particle abrasion (APA) 처리를 시행한 군; APA125군, 125 ㎛ 크기의 Al2O3로 APA 처리를 시행한 군; ZA군, ZrO2 slurry를 적용한 군. 각 군에 3종의 레진시멘트(Panavia F 2.0, Superbond C&B, Variolink N)를 접착하고, 만능시험기를 이용하여 전단결합강도를 측정하였다. 주사전자현미경을 이용해 각 군의 대표 표본의 표면을 관찰하였다. 표면처리 방법과 레진시멘트 종류에 따른 상호작용이 존재하는지 알아보기 위하여 Two-way ANOVA를 실시하였고, 각 군 간의 통계적 차이를 알아보기 위해 One-way ANOVA를 시행하였다. 사후검정으로 Tukey HSD test를 실시하였다(α = .05). 결과: 표면처리에 따른 전단결합강도 비교에서, APA125군, APA50군, ZA군, 대조군 순으로 높은 값을 보였고, APA처리를 시행한 군(APA50군, APA125군) 간에는 통계적으로 유의한 차이가 없었다(P > .05). 또한, ZA군은 대조군보다 유의성 있게 높은 값을 보였다(P < .05). 레진시멘트 종류에 따라서는 Panavia F 2.0, Superbond C&B, Variolink N 순으로 높은 전단결합강도를 보였다(P < .05). APA50군과 APA125군에서는 거칠고 불규칙한 표면이 관찰되었고, ZA군에서는 작고 불규칙한 다공성과 거친 표면이 관찰되었다. 결론: 본 연구의 한계내에서, APA 처리와 ZrO2 slurry를 적용했을 때 지르코니아의 표면 거칠기가 증가됨을 확인할 수 있었고, MDP를 함유한 Panavia F 2.0가 지르코니아와의 가장 높은 전단결합강도를 보였다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.228-243
• /
• 1997

The changes of microstructures, morphology of sclerotic dentin and bonding aspects generated by an adhesive resin was investigated. Incisors and premolars showing natural cervical abrasions were collected and conditioned with 10 % phosphoric acid or 10 % maleic acid. The sclerotic dentin specimens were then rinsed and blot-dried and applied with dentin adhesive (All Bond 2) to the conditioned dentin surface. To examine the morphologic change of the sclerotic dentin specimen after etching and bonding procedure, the treated specimens were examined by SEM. To analyze the chemical composition of sclerotic dentin and crystals occluding dentinal tubules, the sclerotic dentin specimen was powdered and examined with X-ray Diffractometer. To investigate the Ca/P weight percent ratio within the dentinal tubules, the sclerotic dentin specimen was fractured perpendicularly to the long axis of the tooth from the center of cervical abrasion lesion and then examined with EDX(Energy Dispersive X-ray) microanalyzer. The results were as follows : 1. The increased width of peritubular dentin and the depositions of the irregular amorphous materials within the dentinal tubules were showed in the sclerotic dentin specimens. 2. After the treatment of sclerotic dentin specimen with 10 % phosphoric acid or 10 % maleic acid, the lateral side of tubules rather than cross-sectional tubule openings was showed exclusively at the incisal and gingival incline of the specimens. 3. After the treatment of sclerotic dentin specimen with 10 % phosphoric acid or 10 % maleic acid, the hybrid layer was not formed evidently and the resin tag was not formed or shortly penetrated into the tubules with the thinner diameter. 4. According to the results of XRD analysis of the sclerotic dentin specimen, Hydroxyapatite and Octacalcium phosphate were predominent, however, Whitlockite crystals were rare. 5. The mean Ca/P weight percent ratio analysed from 5 fractured sclerotic dentin specimens was $2.322{\pm}0.170$ at the intertubular dentin, $1.826{\pm}0.051$ within the dentinal tubule.