• 한국염색가공학회지
• /
• 제5권2호
• /
• pp.144-148
• /
• 1993

To increase the moisture content and thereby to reduce the static charge of polyacrylonitrile (PAN), thin layer surface photografting of acylamide (AAm) onto PAN fabrics by using benzophenone as a initiator with a mixtured solvent was carried. The effects of reaction conditions such as monomer, initiator concentrations, UV irradiation time and immersion time of fabrics on grafting were investigated. The percent grafting slightly increased with increasing monomer concentration, benzophenone concentration up to limiting value and thereafter decreased or level offed. The percent grafting was significantly increased with increasing irradiation and immersion times. The moisture regain increased with increasing the percent grafting. The static charge decreased with increasing the percent grafting.

• Nuclear Engineering and Technology
• /
• 제13권4호
• /
• pp.245-253
• /
• 1981

고분자피복재 중 polyethylene은 전기적 절연성 및 내방사선성이 좋으나 난연성이 결여되어 있으므로 이 단점을 개질하였다. 방사선을 이용하여 polyethylene에 여러 종류의 난연제를 고착시켰는데 grafting 방법과 blending후 crosslinking 방법을 사용하였다. 일반적으로 grafting시키는 경우 시료에 난연제가 고착되는 량은 방사선선량이 증가할수록 증가하였다. Grafting 방법으로 polyethylene에 난연제를 고착시킬 때 시료를 팽윤(swelling)시켜서 난연제를 grafting시켜야 한다. Blending 한 후 crosslinking시킨 경우 시료와 난연제의 량을 자유롭게 조절하여 blending하여 crosslinking시킬 수 있는 이질이 있다. 난연제를 고착시키는 2가지 방법중 blending후 crosslinking 시키는 방법이 가장 바람직하다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.99-101
• /
• 1998

1. Introduction : The conventional grafting polymerization technique requires chemically reactive groups on the surface as well as on the polymer chains. For this reason, a series of prefunctionalization steps are necessary for covalent grafting. The surface prefunctionalizational technique for grafting can be used to ionization radiation, UV, plasma, ion beam or chemical initiators. Of these techniques, radiation method is one of the useful methods because of uniform and rapid creation of active radical sites without catalytic contamination in grafted samples. If the diffusion of monomer into polymer is large enough to come to the inside of polymer substrate, a homogeneous and uniform grafting reaction can be carried out throughout the whole polymer substrate. Radiation-induced grafting method may attach specific functional moieties to a polymeric substrate, such as preirradiation and simultaneous irradiation. The former is irradiated at backbone polymer in vacuum or nitrogen gas and air, and then subsequent monomer grafting by trapped or peroxy radicals, while the latter is irradiated at backbone polymer in the presence of the monomer. Therefore, radiation-induced polymerization can be used to modification of the chemical and physical properties of the polymeric materials and has attracted considerable interest because it imparts desirable properties such as blood compatibility. membrane quality, ion excahnge, dyeability, protein adsorption, and immobilization of bioactive materials. Synthesizing biocompatible materials by radiation method such as preirradiation or simultaneous irradiation has often used $\gamma$-rays to graft hydrophilic monomers onto hydrophobic polymer substrates. In this work, in attempt to produce surfaces that show low levels of anti-fouling of bovine serum albumin(BSA) solutions, hydroxyethyl methacrylate(HEMA) was grafted polypropylene membrane surfaces by preirradiation technique. The anti-fouling effect of the polypropylene membrane after grafting was examined by permeation BSA solution.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.384-392
• /
• 2004

The purpose of this study is in development of effective filter-type polymer adsorbent for removal of pollutants from wastewater by UV irradiation graft polymerization. Photografting of acrylic acid (AA) on polypropylene (PP) nonwoven fabric using benzophenone (BP) as a photosensitizer was investigated. Inhibition of homopolymerization was achieved by adding various concentrations of $FeSO_4{\cdot}7H_2O$, $CuSO_4{\cdot}5H_2O$ and Mohr's salt. As AA concentration was increased, the degree of grafting was increased as to a specific value and then decreased, and the effect of BP concentration showed the same tendency. It was also found that the degree of grafting increased with reaction time and reaction temperature. Addition of the polyfunctional monomers and $H_2SO_4$ to the grafting system accelerated the photografting. The melting temperature, molecular weight and breaking stress and breaking strain were decreased with the increase in the degree of grafting.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2000년도 춘계학술대회 논문집
• /
• pp.139-141
• /
• 2000

Carboxylic acid group was introduced onto polyethylene (PE) film by the grafting of acrylic acid onto PE film irradiated with electron beam. The grafting Condition such as reaction temperature, additives, total irradiation dose, thickness of PE film, and monomer concentration was examined. The extent of grafting was found to increase with increasing reaction temperature and total irradiation dose. The grafting yield was much enhanced with the addition of both FeSO$_4$ 7H$_2$O and H$_2$SO$_4$.

• 방사선산업학회지
• /
• 제8권1호
• /
• pp.53-57
• /
• 2014

The kenaf is quickly developing as a renewable resource. Kenaf can be grown under a wide range of weather conditions. Modification of kenaf fiber by graft polymerization provides a significant route to alter the chemical properties, including surface hydrophilicity or hydrophobicity. In this study, kenaf fiber surfaces were grafted with acrylic acid as a hydrophilic group using electron beam irradiation. The grafting rate increased with an increase in grafting time. The FT-IR results confirmed that acrylic acid was successfully grafted onto the kenaf fibers. The wettability of the kenaf fiber was increased, accompanied by acylic acid grafting on the fiber surface. According to the permeability test result, it was found that acrylic acid grafted kenaf fiber reinforced cement composite was more reduced than non-grafted kenaf fiber reinforced cement composite.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.373-380
• /
• 2020

This study was carried out to convert the hydrophobic characteristics of PVDF to hydrophilic. Poly(-vinylidene fluorine) (PVDF) was grafted by electron beam irradiation and sulfonated. The grafting degree of modified PVDF increased with the monomer concentration, but not the conversion degree. From the results of FTIR and XPS, it was shown that the amount of converted sulfur increased with the grafting degree. The radiation-induced graft polymerization led to decrease fluorine from 35.7% to 21.3%. Meanwhile, the oxygen and sulfur content increased up to 8.1% and 3.2%. The pore size of modified membranes was shrunken and the roughness sharply decreased after irradiation. The ion exchange capacity and contact angle were investigated to show the characteristics of PVDF. The enhanced ion exchange capacity and lower contact angle of modified PVDF showed that the hydrophilicity played a role in determining membrane fouling. Electron beam irradiation successfully modified the hydrophobic characteristics of PVDF to hydrophilic.

• 폴리머
• /
• 제35권5호
• /
• pp.478-482
• /
• 2011

본 연구는 스티렌과 (trimethoxysilyl)propyl methacrylate(TMSPM)을 함유하여 그래프트된 ETFE 필름을 방사선 동시 조사방법으로 제조하는 것에 관한 연구이다. 스티렌/TMSPM을 혼합한 물질을 여러 종류의 용매를 사용하여 일정한 비율로 희석 후 조사선량, 조사선량률 및 희석된 용액의 농도 등의 조건을 달리하여 그래프트율에 미치는 영향을 관찰하였다. 그 결과 스티렌/TMSPM 단량체 혼합물에 아세톤 용매를 사용한 경우에 다른 용매를 사용한 것보다 높은 그래프트율을 보여주고 있음을 알 수 있었다. IR 스펙트럼 분석을 통하여 스티렌과 TMSPM이 동시에 ETFE 필름에 그래프트됨을 확인할 수 있었으며 SEM-EDX를 통하여 PTMSPM이 함유하고 있는 실리콘 분포도를 분석한 결과, PTMSPM 그래프트 고분자가 ETFE 필름 내부까지 균일하게 그래프트가 이루어졌음을 관찰할 수 있었다.

• 공업화학
• /
• 제7권5호
• /
• pp.946-953
• /
• 1996

동시조사법에 의한 아크릴산의 폴리프로필렌 부직포에 대한 그라프트 반응에서 조사량, 조사선량률, 금속염 및 용매가 그라프트 반응에 미치는 영향을 조사하였다. 같은 조사선량에서는 선량률이 낮을수록 높은 그라프트율을 나타냈다. 한편 조사선량률을 달리하여 일정 시간 동안 그라프트 반응시키면 조사선량률이 높을수록 그라프트율은 높았으며, 첨가한 금속염의 종류에 관계없이 그라프트 속도는 조사선량률의 0.74 차수에 비례하였다. 사용한 금속염 중에서 $FeSO_4{\cdot}7H_2O$가 가장 우수하였으며, 첨가제의 함량이 증가하면 할수록 그라프트율은 감소하였지만 적정농도이하에서는 그라프트용액이 고화되어 그라프트 반응시킬 수 없었다.

• 폴리머
• /
• 제33권3호
• /
• pp.268-271
• /
• 2009

본 연구에서는 방사선 동시조사법에 의해 제조된 FEP-g-PSSA 막 단면을 SEM-EDX 기기로 분석하여 스티렌 술폰산 고분자(PSSA)의 막 내부로의 분포 경향을 연구하였다. 본 실험에서는 그래프트율, FEP 필름 두께, 선량률, 그래프팅 용매 등 여러 조사조건이 그래프트 고분자의 분포에 미치는 영향을 중점적으로 연구하였다. 실험 결과 균일하게 그래프트된 FEP-g-PSSA 막을 얻기 위해서는 필름 두께가 증가할수록 높은 그래프트율이 요구되어지고, 같은 조사 선량에서는 낮은 조사 선량률로 그래프트하는 것이 효과적임을 보여준다.