• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.6.1-6.7
• /
• 2013

Objectives In this study, we investigated the influence of ionic strength and natural organic matter (NOM) on aggregation and soil adsorption of citrate-coated silver nanoparticles (AgNPs). Methods Time-resolved dynamic light scattering measurements and batch adsorption experiments were used to study their aggregation and soil adsorption behaviors, respectively. Results The aggregation rate of AgNPs increased with increasing ionic strength and decreasing NOM concentration. At higher ionic strength, the AgNPs were unstable, and thus tended to be adsorbed to the soil, while increased NOM concentration hindered soil adsorption. To understand the varying behaviors of AgNPs depending on the environmental factors, particle zeta potentials were also measured as a function of ionic strength and NOM concentration. The magnitude of particle zeta potential became more negative with decreasing ionic strength and increasing NOM concentration. These results imply that the aggregation and soil adsorption behavior of AgNPs were mainly controlled by electrical double-layer repulsion consistent with the Derjaguin-Landau-Verwey-Overbeek theory. Conclusions This study found that the aggregation and soil adsorption behavior of AgNPs are closely associated with environmental factors such as ionic strength and NOM and suggested that assessing the environmental fate and transport of nanoparticles requires a thorough understanding of particle-particle interaction mechanisms.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.5
• /
• pp.827-831
• /
• 1994

Investigation on the extractability, Mg2+-, Ca2+ , EDTA-ATPase activity and solubility of actomyosin prepared from leg and breast muscle of silky fowol were as follows. The extractability of actomyosin in leg and breast muscle was 779mg/100g and 1, 318mg/100g respectively, breast muscle was higher than leg muscle . Mg2+-ATPase activity of actomyosin was high inionic strength 0.02-0.10 and Mg2+ATPase activity of low ionic strength was higher than high ionic strength not related to the part. Ca2+ ATPase activity was high in ionic strength 0.05-0.13, the activity of leg muscle was higher that breast muscle. And EDTA-ATPase activity showed low in low ionic strength and showed high in high ionic strength, and increased greatly depend ionic strength up to 0.4. The solubility of actomyosin was not different in leg and breast muscle , the solution started in KCI concentration of 0.3M and ended in DCI concentration of 0.4M.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.57-62
• /
• 2010

The lithium ion concentration dependant ionic conductivity and thermal properties of poly(ethylene glycol) methyl ether methacrylate (PEGMA)/acrylonitrile-based copolymer electrolytes with $LiClO_4$ have been studied by differential scanning calorimetry (DSC), linear sweep voltammetry (LSV) and AC complex impedance measurements. In systems with 11 wt% of acrylonitrile all liquid electrolytes were obtained regardless of lithium ion concentration. Complex impedance measurements with stainless steel electrodes give ambient ionic conductivities $8.1\times10^{-6}\sim1.4\times10^{-4}S cm^{-1}$. On the other hand, a hard and soft films at ambient temperature were obtained in copolymer electrolyte system consists of 15 wt% acrylonitrile with 6 : 1 and 3 : 1 of [EO] : [Li] ratio, respectively. DSC measurements indicate the crystalline melting temperature of poly(PEGMA) disappeared completely after addition of $LiClO_4$ in this system due to the complex formation between ethylene oxide (EO) unit and lithium salt. As a result, free standing film with room temperature ionic conductivity of $1.7\times10^{-4}S cm^{-1}$ and high electrochemical stability up to 5.5V was obtained by controlling of acrylonitrile and lithium salt concentration.

• Archives of Pharmacal Research
• /
• v.4 no.2
• /
• pp.99-107
• /
• 1981

To investigate the protein binding characteristics of ibuprofenlysine, the effects of drub conentration, pH, ionic strength and protein concentration on the binding of drug to protein concentration on the binding of drug to protein were studied by fluorescence probe method. The conformational change of protein was investigated by circular dichroism (CD) measurement. As the concentration of drug increases, the association constant decreases. These may be due to complex formation of the probe and drug, or the interaction of the protein-probe complex and drug. The association constant for ibuprofenlysine increased with increasing protein concentration. These finding suggest a sharing of one ibuprofenlysine molecule by more than one protein molecule in the binding. The binding between ibuprofenlysine and protein was dependent on pH and ionic strength. It seems that both hydrophobic binding and some electrostatic forces are involved in the binding of ibuprofenlysing to protein.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.465-468
• /
• 2009

In this study, acid cellulase was used to treat denim fabrics by varying pH, temperature, enzyme concentration, treatment time and non-ionic surfactant (Triton X-100) concentration. Treatment condition was controlled based on the weight loss. The characteristics of enzyme-treated fabrics were measured in terms of tearing strength, stiffness, and color difference. The optimum conditions for cellulase treatment of denim fabric were pH 5.0, $50^{\circ}C$, 3% (o.w.f.), 90minutes. The weight loss did not change significantly with the addition of a non-ionic surfactant, but it improved when more non-ionic surfactant were used. The tearing strength of enzyme-treated denim fabrics did not deteriorate. The stiffness of the treated fabrics improved with the enzymatic treatment with and without the non-ionic surfactant. The difference in color of fabrics treated with enzyme increased.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.409-414
• /
• 2008

The fabrication of gelatin nanofibers by electro spinning has been examined using the TFE/DW co-solvent system. It has been found that no beads-on-string structure was formed for the solution containing ionic salts. The resulting fibers exhibited a uniform diameter ranging from 110 to 125 nm. As the concentration of ionic salts increases, the beads become smaller and more spindle like, due to the increase of viscosity and conductivity. The addition of ionic salts induces a higher charge density on the surface of ejected jet during spinning, leading that higher elongation forces are applied to the jet. The higher enhancement of viscosity and conductivity was observed in gelatin solutions by the use of divalent salt. However, the concentration of ionic salts scarcely affected the variation of fiber diameter. While very low crystallinity was observed from XRD pattern for the sample containing no ionic salt, which increased with increasing the concentration of ionic salts.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.305-309
• /
• 2020

In this study, a series of ionic liquids based electrolytes for lithium batteries were prepared by mixing the anion functionalized ionic liquid, [DMIm][MPEGP] (1,3-dimethylimidazolium (2-methoxy(2-ethoxy(2-ethoxy)))-ethylphosphite), with the lithium salt, LiTf₂N (lithium bis(trifluoromethanesulfonyl)imide), and the concentration of lithium salt was varied between 0 and 3.0 molar ratio. We observed the ionic mixtures became opaque and spontaneously aggregated to form a thermotropic ionic liquid crystal. Extensive spectroscopic examinations of the ionic liquid crystals were carried out to investigate their self-organized structures and the ion transport behavior depending on the concentration of lithium salt. An increase in the ionic conductivity was observed for the ionic liquid crystals related to the ability to form ion diffusion pathways along the ordered structures, resulting in improved electrochemical performances of lithium batteries.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.715-726
• /
• 2016

This study investigates the characteristics of metallic and ionic elements concentration, concentration according to transport path, and factor analysis in $PM_{10}$ at Guducsan in Busan in the springtime of 2015. $PM_{10}$ concentration in Guducsan and Gwaebeopdong were $59.5{\pm}9.04{\mu}g/m^3$ and $87.5{\pm}20.2{\mu}g/m^3$, respectively. Contribution rate of water-soluble ions and secondary ion in $PM_{10}$ concentration in Guducsan were 37.0% and 27.8% respectively. [$NO_3{^-}/SO{_4}^{2-}$] ratio and contribution rate of sea salt of $PM_{10}$ in Guducsan and Gwaebeopdong were 0.91 and 1.12, 7.0% and 5.3%, respectively. The results of the backward trajectory analysis indicates that $PM_{10}$ concentration, total inorganic water-soluble ions and total secondary ions were high when the air parcels moved from Sandong region in China than non-Sandong and northen China to Busan area. The results of the factor analysis at Guducsan indicates that factor 1 was anthropogenic source effects such as automobile emissions and industrial combustion processes, factor 2 was marine sources such as sea salts from sea, and factor 3 was soil component sources.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.1
• /
• pp.55-61
• /
• 2010

The sensitivity of aerosol light extinction coefficient to the aerosol chemical composition change is estimated by (1) calculating the aerosol water content and chemical concentrations by a gas/particle equilibrium model and (2) calculating the aerosol light extinction coefficient by a Mie theory based optical model. The major chemical species are total (gas and particle phase) sulfuric acid, total nitric acid, and total ammonia which are based on the measurement data at Seoul and Gosan. At Seoul, since there were enough ammonia to neutralize both total sulfuric acid and total nitric acid, the dry ionic concentration is most sensitive to the variation of the total nitric acid level, while the total mass concentration (ionic concentration plus water content) and thus, the aerosol light extinction coefficient are primarily determined by the total sulfuric acid. At Gosan, since the concentration of ambient sulfuric acid was the highest among the inorganic species, sulfate salts determined aerosol hygroscopicity. Thus, both ionic and total mass concentration, and resultant aerosol light extinction coefficient are primarily determined by the sulfuric acid level.

• Journal of Korean Society on Water Environment
• /
• v.36 no.3
• /
• pp.185-193
• /
• 2020

Bimodal flocculation describes the aggregation and breakage processes of the flocculi (or primary particles) and the flocs in the water environment. Bimodal flocculation causes bimodal size distribution with the two separate peaks of the flocculi and the flocs. Extracellular polymeric substances and ionic species common in the water environment increase the occurrence of bimodal flocculation and flocculi-floc size distribution, under the flocculation mechanisms of electrostatic attraction and polymeric bridging. This study investigated bimodal flocculation and flocculi-floc size distribution, with respect to the extracellular polymeric substance concentration and ionic strength in the kaolinite-containing suspension. The batch flocculation tests comprising 0.12 g/L of kaolinite showed that the highest flocculation potential occurred at the lowest xanthan gum (as extracellular polymeric substances) concentration, under all the ionic strengths of 0.001, 0.01, and 0.1 M NaCl. Also, it was important to note that the higher ionic strength resulted in the higher flocculation potential, at all the xanthan gum concentrations. The bimodal flocculation and flocculi-floc size distribution became apparent in the experimental conditions, which had low and intermediate flocculation potential. Besides the polymeric bridging flocculation, steric stabilization increased the flocculi mass fraction against the floc mass fraction, thereby developing the bimodal size distribution.