• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.43-49
• /
• 1996

This study was conducted to investigate the effects of artificial zeolite and various ion exchangers supplemented in rockwool on the ion exchangability of muskmelon. The results obtained were as follows ; Plant height was higher in the treatment of Ca type artificial zeolite as of 131.2cm than that of control as of 124cm, and same trends were shown in fresh weight of leaf and stem. Fruit weight was increased by supplement of artificial zeolite, but there were no significant differences in the sugar degree and external appearance as influenced by supplementing artificial zeolite. Supplement of artificial zeolite stabilized the pH and increased the ion exchange capacity of nutrient solution. Nutrient absorption was more favorable and led to growth promotion. This study was demonstrated that supplement of artificial zeolite in rockwool slab was improved the stabilization of root environment and increased ion uptake of muskmelon plant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.414-414
• /
• 2007

In this study, Liquid Crystal (LC) alignment and tilt angle generation in Nematic Liquid Crystal (NLC) with negative dielectric anisotropy on the homeotropic PI surface with new ion beam exposure are reported. Also. high density of ion beam energy (DuoPIGatron type Ar ion gun) is used in this study. The tilt angle of NLC on the homeotropic Polyimide (PI) surface for all incident angles is measured about 38 degree and this has a stabilization trend. And the good LC alignment of NLC on the PI surface with ion beam exposure of $45^{\circ}$ incident angle was observed. Also the tilt angle of NLC on the homeotropic PI surface with ion beam exposure of $45^{\circ}$ had a tendency to decrease as ion beam energy density increase. The tilt angle could be controlled from verticality to horizontality. Also, the LC aligning capabilities of NLC on the homeotropic PI surface according to ion beam energy has the goodness in case of more than 1500 eV. Finally. the superior LC alignment thermal stability on the homeotropic PI surface with ion beam exposure can be achieved. For OCB(Optically Compensated Bend) mode driving, we can need pretilt angles control for fast response time. In this study, We success pretilt angles control. Consequently, this result can be applied for OCB mode.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.247-250
• /
• 2006

Maximizing the productivity in reactive ion etching, early detection of process equipment anomaly became crucial in current high volume semiconductor manufacturing environment. To address the importance of the process fault detection for productivity, support vector machines (SVMs) is employed to assist the decision to determine process faults in real-time. SVMs for eleven steps of etching runs are established with data acquired from baseline runs, and they are further verified with the data from controlled (acceptable) and perturbed (unacceptable) runs. Then, each SVM is further utilized for the fault detection purpose utilizing control limits which is well understood in statistical process control chart. Utilizing SVMs, fault detection of reactive ion etching process is demonstrated with zero false alarm rate of the controlled runs on a run to run basis.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2939-2942
• /
• 2003

A new contactless Li-ion battery charging system was proposed. The conventional methods for charging Li-ion battery have some weak points. For example, there can be a contact failure, a poor waterproof, and a difficulty to standardize the battery charging systems. The new proposed system can overcome these weak points. The new charging system is composed of power transfer part and data transfer part. This paper focuses on the power transfer part for contactless battery charging. The power stage is mainly composed of PPRC(Push-pull Parallel Resonant Converter) and flyback converter. The new method of chaging Li-ion battery was proposed and PPRC + flyback-boost topology was analyzed. The proposed toplogy was tested under the constant voltage control and the constant current control which are adequate for charging Li-ion battery.

• Toxicological Research
• /
• v.11 no.1
• /
• pp.43-49
• /
• 1995

The effects of metallothionein and cadmium ion on the hepatic aldehyde oxidase activity and brain lipid peroxidation were tested in vitro. The content of brain lipid peroxide at the condition of normal or $300{\mu}M$ Fe(II)-induced was remarkably reduced by the addition of metallothionein in the incubation mixture. The induced content of lipid peroxide by cadmium $(30{\mu}g/ml)$ ion was reduced by metallothionein $(100{\mu}g/ml)$. The activity of aldehyde oxidase was not affected by metallothionein, but cadmium ion $(8.38{\mu}g/ml)$ increased the activity of aldehyde oxidase about 80% compared to the control. The cadmium-induced activity of aldehyde oxidase was restored to the control level by metallothionein or penicillamine.

• Journal of Applied Biological Chemistry
• /
• v.42 no.2
• /
• pp.85-91
• /
• 1999

The incubation study was conducted under aerobic and anaerobic conditions to study the release of the kinetically labile forms (i. e. chelating ion or anion forms) of Cd, Cu and Zn in sludge-untreated soil ("Control"), sludge 50 and $100dry\;Mg\;ha^{-1}$ treated soils ("Soil-Sludge mixtures"), and sewage sludge ("Sludge"). The chelating ion and anion exchange membranes were embedded into the samples and incubated for 16 weeks under aerobic and anaerobic condition. The total amounts of chelating ion or anionic forms of Cd were too little to be measured during both aerobic and anaerobic incubation. On the other hand, the total amounts of chelating ion or anionic forms of Cu and Zn slightly increased throughout the incubation period under both incubation conditions. For "Control" and "Soil-Sludge mixtures" treatments, the total amounts of Cu and Zn in chelating ion and anion exchange membrane were little difference between aerobic and anaerobic condition, and the total amounts of chelating ion form of Cu and Zn were not different from the those of anionic form of Cu and Zn. However, for "Sludge" treatment, the total amounts of Cu and Zn in anion and chelating ion exchange membrane were greater under aerobic condition than under anaerobic condition, and the total amounts of chelating ion form of Cu and Zn were greater than those of anion form of Cu and Zn under both incubation conditions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.151-152
• /
• 2017

This tests examined the effectiveness of bacteria slime on the chloride ion penetration resistance of cement mortar. Test results exhibited that the chloride ion penetration depth of mortars including 5% expanded vermiculite immobilizing bacteria was 17% smaller than that of the control mortar without expanded vermiculite.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2344-2346
• /
• 2002

A vacuum control system has been developed for using Ethernet Multi Serial Device Severs (EMSDS) for the Pohang Accelerator Laboratory (PAL) storage ring. There are 124 vacuum ion pumps at the storage ring. It was a very important problem to solve the problem how to control such a big number of vacuum pumps distributed around the ring. After discussions, we decided to develop a serial to ethernet interrace device sever that will be mounted in the control system rack. It has a 32-bits microprocessor embedded Linux, 12 ports RS485 (or RS232) slave interface. one channel 10/100BaseTx ethernet host port, one channel UART host port, and 16 Mbytes large memory buffer. These vacuum pumps are connected to Ion-Pump serial controllers, which chop the AC current so as to control the current in the pumps. The EMSDS connect either 100BaseTx or 10BaseT ethernet networks to asynchronous serial ports for communication with serial device. It can simultaneously control up to 12 ion-pump serial controllers. 12 EMSDS are connected to a personal computer (PC) through the network. The PC can automatically control the EMSDS by sending a set of commands through the TCP/IP network. Upon receiving a command from a PC running under Windows2000 through the network, the EMSDS communicate through the stave serial interrace ports to ion-pump controller. We added some software components on the top of EPICS (Experimental Physics and Industrial Control System) toolkit.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.4
• /
• pp.220-225
• /
• 2004

A new ion beam extraction system is designed using a simple ion mass filter and a micro mass balance and a QMS based detecting system. A quadrupole Mass Filter is used for selective ion beam formation from inductively coupled high density plasma sources with appropriate electrostatic lens and final analyzing QMS. Also a quartz crystal microbalance is set between a QMF and a QMS to measure the etching and polymerization rate of the mass selected ion beam. An inductively coupled plasma was used as a ion/radical source which had an electron temperature of 4-8 eV and electron density of $4${\times}$10^{11}$＃/㎤. A computer interfaced system through 12bit AD-DA board can control the pass ion mass of the qmf by setting RF/DC voltage ratio applied to the quadrupoles so that time modulation of pass ion's mass is possible. So the direct measurements of ion - surface chemistry can be possible in a resolution of $1\AA$/sec based on the qcm's sensitivity. A full set of driving software and hardware setting is successfully carried out to get fundamental plasma information of the ICP source and analysed $Ar^{+}$ beam was detected at the $2^{nd}$ QMS.

• Microbiology and Biotechnology Letters
• /
• v.25 no.3
• /
• pp.317-321
• /
• 1997

The effect of ammonium ion concentration on the production of demethyl- chlortetracycline (DMCT) by a DMCT overproducing mutant, Streptomyces aureofaciens 27VR, and the optimal control of pH were studied. The optimum levels of pH control were 6.5-6.6 for 80-120 hr, 6.4- 6.5 for 121-150hr and 6.3-6.4 for 151-190hr. The optimum level of ammonium ion concentration during the pH control was lower than 20 mg%. Under the optimized culture condition, it was possible to produce DMCT with an 18% increase in productivity compared to that of standard culture condition in 190hrs of the fermentor operation.