• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.903-913
• /
• 2021

Three-type PVC membranes denoted by AEM-1, AEM-2, and AEM-3 with a cross-linked anion-exchange group were prepared by substitution reaction of PVC with triethyldiamine (TEDA), 1,4-dimethylpiperazine (DMP), and 1,4-bis(imidazol-1-ylmethyl)benzene (BIB) in cyclohexanone, respectively. We confirmed the successful preparation of the AEM-1, AEM-2, and AEM-3 via ionic conductivity (S/cm), water uptake (%), contact angle, ion-exchange capacity (m_eq/g), thermal properties, SEM and XPS analysis, respectively. The electrochemical capacitor experiments using PVC membrane with cross-linked anion-exchange group in organic electrolytes were performed. The prepared AEM-1, AEM-2 AEM-3 have a good stability by charge and discharge performance in organic electrolyte. As a result, the AEM-2 and AEM-3 membrane based on PVC prepared by the solvent casting method after substituent reaction is suitable for the use as a separator in organic electrochemical capacitor (supercapacitor).

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.49-59
• /
• 2021

BACKGROUND: Soil salinity causes reduction of crop productivity. Rhizosphere microbes have metabolic capabilities and ability to adaptation of plants to biotic and abiotic stresses. Plant growth-promoting bacteria (PGPB) could play a role as elicitors for inducing tolerance to stresses in plants by affecting resident microorganism in soil. This study was conducted to demonstrate the effect of selected strains on rhizosphere microbial community under salinity stress. METHODS AND RESULTS: The experiments were conducted in tomato plants in pots containing field soil. Bacterial suspension was inoculated into three-week-old tomato plants, one week after inoculation, and -1,000 kPa-balanced salinity stress was imposed. The physiological and biochemical attributes of plant under salt stress were monitored by evaluating pigment, malondialdehyde (MDA), proline, soil pH, electrical conductivity (EC) and ion concentrations. To demonstrate the effect of selected Bacillus strains on rhizosphere microbial community, soil microbial diversity and abundance were evaluated with Illumina MiSeq sequencing, and primer sets of 341F/805R and ITS3/ITS4 were used for bacterial and fungal communities, respectively. As a result, when the bacterial strains were inoculated and then salinity stress was imposed, the inoculation decreases the stress susceptibility including reduction in lipid peroxidation, enhanced pigmentation and proline accumulation which subsequently resulted in better plant growth. However, bacterial inoculations did not affect diversity (observed OTUs, ACE, Chao1 and Shannon) and structure (principle coordinate analysis) of microbial communities under salinity stress. Furthermore, relative abundance in microbial communities had no significant difference between bacterial treated- and untreated-soils under salinity stress. CONCLUSION: Inoculation of Bacillus strains could affect plant responses and soil pH of tomato plants under salinity stress, whereas microbial diversity and abundance had no significant difference by the bacterial treatments. These findings demonstrated that Bacillus strains could alleviate plant's salinity damages by regulating pigments, proline, and MDA contents without significant changes of microbial community in tomato plants, and can be used as effective biostimulators against salinity stress for sustainable agriculture.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.85-89
• /
• 2021

AlGaN-based UV-C light-emitting diodes (LEDs) were applied for p-type activation by electrochemical potentiostatic activation (EPA). The p-type activation efficiency was increased by removing hydrogen atoms through EPA treatment using a neutral Mg-H complex that causes high resistance and low conductivity. A neutral Mg-H complex is decomposed into Mg^- and H⁺ depending on the key parameters of solution, voltage, and time. The improved hole carrier concentration was confirmed by secondary ion mass spectroscopy (SIMS) analysis. This mechanism eventually improved the internal quantum efficiency (IQE), the light extraction efficiency, the leakage current value in the reverse current region, and junction temperature, resulting in better UV-C LED lifetime. For systematic analysis, SIMS, Etamax IQE system, integrating sphere, and current-voltage measurement system were used, and the results were compared with the existing N₂-annealing method.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.3
• /
• pp.97-104
• /
• 2024

The electrodes of commercialized lithium secondary batteries are manufactured through a wet coating process, and the drying process (DC) is a very important factor as to electrode production speed and process cost. In this study, silicon anodes were manufactured under high-temperature (180 ℃) and low-temperature (50 ℃) DC to investigate the quality and the electrochemical performance of Si-electrodes according to DC. High-temperature DC can quickly evaporate the solvent in the Si-electrode slurry, improving the electrode production rate. However, this also causes the electrode composite to peel off from the current collector. As a result, the Si-electrode's adhesion weakened, and the electrode coating's quality deteriorated. In addition, the Si-electrode manufactured under high-temperature was found to have a thicker composite material than the Si-electrode manufactured under low-temperature. Si-electrodes manufactured under high-temperature had higher sheet resistance and lower electrical conductivity than those manufactured under low-temperature. Consequently, the Si-electrode manufactured under low-temperature showed 152.5% superior cycle performance compared to the Si-electrode manufactured under high-temperature. (Discharge capacities of Si-electrodes manufactured under high-temperature and low-temperature DC were 844 and 1287 mAh g^-1, respectively, after 300 cycles). Establishing the DC of Si-electrodes can easily provide new perspectives to improve the quality and stability of Si-electrodes.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.309-315
• /
• 2024

Silicon and carbon composite (SiC) is considered one of the most promising anode materials for the commercialization of Si-based anodes, as it could simultaneously satisfy the high theoretical capacity of Si and the high electronic conductivity of carbon. However, SiC active material undergoes repeated volumetric changes during charge/discharge processes, leading to continuous electrolyte decomposition and capacity fading, which is still considered an issue that needs to be addressed. To solve this issue, we suggest a 4,4'-Methylenebis(cyclohexyl isocyanate) (H₁₂MDI)-based waterborne polyurethane binder (HPUD), which forms a 3D network structure through thermal cross-linking reaction. The cross-linked HPUD (denoted as CHPU) was prepared using an epoxy ring-opening reaction of the cross-linker, triglycidyl isocyanurate (TGIC), via simple thermal treatment during the SiC anode drying process. The SiC anode with the CHPU binder, which exhibited superior mechanical and adhesion properties, not only demonstrated excellent rate and cycling performance but also alleviated the volume expansion of the SiC anode. This work implies that eco-friendly binders with cross-linked structures could be utilized for various Si-based anodes.

• Analytical Science and Technology
• /
• v.29 no.1
• /
• pp.19-28
• /
• 2016

The objective of this study was to determine the acidification of precipitation in the Jeju area. Precipitation samples were collected from the Jeju area from 2009-2014, and the major ionic species were analyzed. In the regression analysis, through a comparison of ion balance, electric conductivity, and acid fraction, the correlation coefficients showed a good linear relationship within the range of 0.927~0.983. The volume-weighted means of the pH and electric conductivity were 4.9 and 22.7 µS/cm, respectively. The ionic strength of precipitation was 0.27±0.38 mM, indicating about 35.9 % of total precipitation within the pure precipitation criteria. The volume-weighted mean concentrations (ìeq/L) of the ionic species in the precipitation were in the order of Na⁺ > Cl⁻ > nss-SO₄²⁻ > NO₃⁻ > NH₄⁺ > Mg²⁺ > H⁺ > nss-Ca²⁺ > PO₄³⁻ > K⁺ > HCOO⁻ > CH₃COO⁻ > NO₂⁻ > F⁻ > HCO₃⁻ > CH₃SO₃⁻ . The acidification contributions by sulfuric and nitric acids were 54.5 % and 36.5 %, respectively. Meanwhile the acidification contributions by formic and acetic acids were 4.8 % and 4.2 %, respectively. Thus, it was found that the acidification of the precipitation in the Jeju area was mainly due to the inorganic acids. The neutralization factors by NH₃ and CaCO₃ were also 33 % and 20 %, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.4
• /
• pp.227-234
• /
• 1974

A survey on the vinyl house soils was conducted to investigate the salt accumulation status and it's effects on the deterioration of soil aggregates. The survey was made for the vinyl house soils in Suwon, Yesan, and Kimhae areas where vegetables are extensively grown under a vinyl house. Physical and chemical properties of the soils at the inside and outside of the vinyl house were compared to continuous vegetable cropping. Electrical conductivity of the soil solution (Y) in vinyl house was closely related to the number of cropping years (X), and the relations are given by the following regression equations: $Y=0.54X{\times}1.44$ ($r=0.580^*$) for loamy textured soils and $Y=0.58X{\times}2.61$ ($r=0.524^*$) for clayey textured soils. Electrical conductivity of the soils, where vegetable cropping in winter and rice in summer were rotated, was lower than that given by the regression equations. Analyses for extractable cations, the concentration of calcium, sodium and potassium was high in the inside vinyl house soils compared to the outside. Soil aggregates larger than 1mm in diameter were greatly deteriorated, while the content of the soil aggregates smaller than 0.5mm in diameter remained unchanged. Aggregate stability of the soil was negatively correlated to the accumulation rate of extractable sodium ($r=-0.681^{**}$), potassium ($r=-0.528^*$) and the amount of daily irrigated water (r=-0.477), while positively correlated to the content of organic matter ($r=-0.692^{**}$) and calcium (r=0.391).

• Analytical Science and Technology
• /
• v.33 no.1
• /
• pp.33-41
• /
• 2020

Wet precipitation samples were collected in Jeju City and Mt. Halla-1100 site (a site at an altitude of 1100 m on Mt. Halla) during 2011-2013, and their major ionic species were analyzed to examine the chemical composition and characteristics. A comparison of ion balance, electric conductivity, and acid fraction of precipitation revealed correlation coefficients in the range of r = 0.950~0.991, thereby implying the high quality of analytical data. Volume-weighted mean pH and electric conductivity corresponded to 4.86 and 25.5 µS/cm for Jeju City, and 4.98 and 15.1 µS/cm for Mt. Halla-1100 site, respectively. Ionic strengths of the wet precipitation in Jeju City and Mt. Halla-1100 site corresponded 0.3 ± 0.5 and 0.2 ± 0.2 mM, respectively, thereby indicating that more than 30 % of total precipitation was within a pure precipitation criteria. The precipitation with a pH range of 4.5 - 5.0 corresponded to 40.8 % in Jeju City, while the precipitation with a pH range of 5.0 - 5.5 corresponded to 56.9 % in Mt. Halla-1100 site, thereby indicating slightly more weak acidity than that in Jeju city. The volume-weighted mean concentration (µeq/L) of ionic species was in the order of Na⁺ > Cl^- > nss-SO₄^2- > NO₃^- > Mg²⁺ > NH₄⁺ > H⁺ > nss-Ca²⁺ > PO₄^3- > K⁺ > CH₃COO^- > HCOO^- > NO₂^- > F^- > HCO₃^- > CH₃SO₃^- at Jeju City area, while it corresponded to Na⁺ > Cl^- > nss-SO₄^2- > NO₃^- > NH₄⁺ > H⁺ > Mg²⁺ > nss-Ca²⁺ > PO₄^3- > CH₃COO^- > K⁺ > HCOO^- > NO₂^- > F^- > HCO₃^- > CH₃SO₃^- at Mt. Halla-1100 site. The compositions of sea salts (Na⁺, Cl^-, Mg²⁺) and secondary pollutants (NH₄⁺, nss-SO₄^2-, NO₃^-) corresponded to 66.1 % and 21.8 %, respectively, in Jeju City and, 49.9 % and 31.5 %, respectively, in Mt. Halla-1100 site. The acidity contributions in Jeju City and Mt. Halla-1100 site by inorganic acids, i.e., sulfuric acid and nitric acid, corresponded to 93.9 % and 91.4 %, respectively, and the acidity contributions by organic acids corresponded to 6.1 % and 8.6 %, respectively. The neutralization factors in Jeju City and Mt. Halla1100 site by ammonia corresponded to 29.8 % and 30.1 %, respectively, whereas the neutralization factors by calcium carbonate corresponded to 20.5 % and 25.2 %, respectively. From the clustered back trajectory analysis, the concentrations of most ionic components were higher when the airflow pathways were moved from the continent to Jeju area.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1669-1679
• /
• 2020

This study examines the washing effect of precipitation on particulate matter (PM) and the rainwater quality (pH, electrical conductivity (EC), water-soluble ions concentration). Of six rain events in total, rainwater samples were continuously collected every 50 mL from the beginning of the precipitation using rainwater collecting devices at Pukyong National University, Busan, South Korea, from March 2020 to July 2020. The collected rainwater samples were analyzed for pH, EC, and water-soluble ions (cations: Na+, Mg2+, K+, Ca2+, NH4+, and anions: Cl-, NO3-, SO42-). The concentrations of particulate matter were continuously measured during precipitation events with a custom-built PM sensor node. For initial rainwater samples, the average pH and EC were approximately 4.3 and 81.9 μS/cm, and the major ionic components consisted of NO3- (5.4 mg/L), Ca2+ (4.2 mg/L), Cl- (4.1 mg/L). In all rainfall events, rainwater pH gradually increased with rainfall duration, whereas EC gradually decreased due to the washing effect. When the rainfall intensities were relatively weak (<5 mm/h), PM10 reduction efficiencies were less than 40%. When the rainfall intensities were enhanced to more than 7.5 mm/h, the reduction efficiencies reached more than 60%. For heavy rainfall events, the acidity and EC, as well as ions concentrations of initial rainwater samples, were higher than those in later samples. This appears to be related to the washing effect of precipitation on PM10 in the atmosphere.

• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.70-76
• /
• 2010

To investigate the ground water quality status for paprika hydroponics for export, its pH, EC (electrical conductivity) and inorganic ion concentrations were analyzed in Gangwan-do (27 samples), Gyeonsangnam-do (77 samples) and Jeollanam-do (54 samples) from November 2008 to September 2009. The average values of several components in ground water were as follows; 7.20 (6.57~7.54) in pH, 0.31 (0.05~0.49) $dS{\cdot}m^{-1}$ in EC, 97.81 (35.37~161.11) in $HCO_3$, 5.68 (0.45~15.48) in T-N, 0.67 (0.15~0.70) in P, 2.53 (0.59~6.70) in K, 35.68 (4.15~80.70) in Ca, 7.35 (1.46~14.87) in Mg, 17.89 (3.31~34.82) in Na, 0.01 (0~0.05) in Fe, 0.09 (0~0.51) in Mn, 0.06 (0~0.07) in Zn, and 0.03 (0~0.10) $mg{\cdot}L^{-1}$ in Cu, respectively. The values of pH, EC, $HCO_3$, Ca, Mg and Na in ground water were different depending on areas and farms. Frequency rates were 92.6% of pH 5.0~8.0, 89.3% of EC < 0.5 $dS{\cdot}m^{-1}$, 69.5% of $HCO_3$ < 100, 97.5% of Na < 30, 88.5% of Ca < 40, 97.5% of Mg < 20, 90.1% of Fe < 0.05, 99.6% of Mn < 0.6, and 98.3% of Zn < 0.5 $mg{\cdot}L^{-1}$, respectively, which can be used for nutrient fertilizers in hydroponics. The percentage of suitable water quality was 46.3% as 70 sites among the all analyzed ions. The pH value showed high significance of correlations with EC, Mg, $HCO_3$, Na, and Fe. Also the EC value showed high positive significance with T-N, K, Ca, Mg, $HCO_3$, Na and Mn.